2508051527Y0 1.5kΩ 0805 Ferrite Bead 300mA EMI Noise Suppression Guide
Product Technical Guide2508051527Y0 Ferrite Bead GuideA structured overview of 2508051527Y0, including impedance characteristics, package information, specifications, applications, and replacement cons…
-2x1,25x0,9.JPG "2508051527Y0 Fair-Rite Products Corp.")
- Part No.:
- 2508051527Y0
- Manufacturer:
- Fair-Rite Products Corp.
- Package:
- 0805 (2012 Metric)
- Datasheet:
- 2508051527Y0.pdf
- Description:
- FERRITE BEAD 1.5 KOHM 0805 1LN
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
2508051527Y0 1.5kΩ 0805 Ferrite Bead 300mA EMI Noise Suppression Guide
A structured overview of 2508051527Y0, including impedance characteristics, package information, specifications, applications, and replacement considerations.
Product Introduction
2508051527Y0 is a signal-line ferrite bead from Fair-Rite Products Corp., designed to suppress unwanted high-frequency noise and electromagnetic interference.
The device provides 1.5kΩ typical impedance at 100MHz, a 300mA current rating, and a compact 0805 surface-mount package.
Key Benefits
High impedance at 100MHz
The specified 1.5kΩ impedance helps attenuate high-frequency noise on signal lines.
Compact 0805 footprint
The 2.00 × 1.25 mm nominal size supports compact PCB layouts.
EMI suppression
Ferrite construction provides frequency-dependent impedance for noise reduction.
Features
- 1.5kΩ impedance at 100MHz
- 300mA maximum rated current
- 700mΩ maximum DC resistance
- Single signal line
- 0805 / 2012 Metric package
- Surface-mount construction
- -55°C to +125°C operating temperature range
Package
Package: 0805 (2012 Metric)
Dimensions: approximately 2.00 × 1.25 mm
Maximum height: approximately 1.10 mm
Mounting: Surface Mount
Pinout
The ferrite bead is a passive two-terminal series component and is normally inserted directly into the signal or power path.
Specifications
| Parameter | Value |
|---|---|
| Filter Type | Signal Line Ferrite Bead |
| Impedance @ 100MHz | 1.5 kΩ |
| Rated Current | 300 mA |
| DC Resistance | 700 mΩ max. |
| Case Size | 0805 / 2012 Metric |
| Temperature Range | -55°C to +125°C |
| Number of Lines | 1 |
Equivalent
Alternative ferrite beads should be compared using impedance versus frequency, rated current, DC resistance, package dimensions, and temperature range. A nominally similar 1.5kΩ bead may not provide identical EMI performance.
Manufacturer
Fair-Rite Products Corp. manufactures 2508051527Y0 as a surface-mount ferrite bead for signal-line filtering and EMI suppression.
Applications
Signal Line Filtering
Used in series with signal paths to reduce unwanted high-frequency noise.
Data Interfaces
Can be used around communication interfaces when impedance and signal-integrity requirements are compatible.
EMI Suppression
Helps reduce conducted high-frequency interference in electronic assemblies.
General Electronics
Suitable for filtering functions in consumer, industrial, and embedded electronics.
Disclaimer
The information provided on this page is for reference and product identification purposes only. Ferrite impedance varies with frequency, DC bias, and test conditions; verify the latest datasheet and application requirements before substitution.
