5KP33A 33V 5kW TVS Diode 94A P600 Transient Protection Guide
Product Technical Guide 5KP33A TVS Diode GuideA structured overview of 5KP33A, covering transient protection characteristics, package information, specifications, pin configuration, applications, and r…
- Part No.:
- 5KP33A
- Manufacturer:
- Littelfuse Inc.
- Package:
- P600, Axial
- Datasheet:
- 5KP33A.pdf
- Description:
- TVS P600 33V 5000W UNIDIR
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
5KP33A 33V 5kW TVS Diode 94A P600 Transient Protection Guide
A structured overview of 5KP33A, covering transient protection characteristics, package information, specifications, pin configuration, applications, and replacement considerations.
Product Introduction
5KP33A is a high-power unidirectional transient voltage suppressor designed to protect electronic circuits from short-duration voltage transients.
The device provides a 33V typical reverse standoff voltage and a maximum clamping voltage of 53.3V under the specified pulse condition.
Key Benefits
High pulse capability
The 5kW peak pulse rating supports demanding transient protection requirements.
Fast transient response
TVS diode operation provides a dedicated path for limiting short-duration overvoltage events.
Through-hole mounting
The axial P600 package is suitable for conventional through-hole PCB assembly.
Features
- Unidirectional TVS diode
- 33V reverse standoff voltage
- 53.3V maximum clamping voltage
- 5kW peak pulse power
- 94A peak pulse current for the Diotec listing
- P600 axial through-hole package
- Operating junction temperature up to 175°C in the referenced listing
Package
Package: P600 axial
Mounting: Through Hole
Configuration: Single unidirectional TVS diode
Pinout
Verify polarity marking and the exact manufacturer mechanical drawing before PCB assembly.
Specifications
| Parameter | Value |
|---|---|
| Type | Unidirectional TVS |
| Reverse Standoff | 33 V |
| Breakdown Voltage Min. | 36.7 V |
| Clamping Voltage Max. | 53.3 V |
| Peak Pulse Power | 5 kW |
| Peak Pulse Current | 94 A |
| Package | P600, Axial |
Equivalent
Potential alternatives must be checked for standoff voltage, breakdown voltage, clamping voltage, pulse power, pulse current, polarity, package dimensions, and thermal characteristics. The same 5KP33A designation may also be offered by other manufacturers, so the manufacturer-specific datasheet should be confirmed.
Manufacturer
The referenced 5KP33A listing is manufactured by Diotec Semiconductor. The 5KP33A designation is also used by other suppliers, making manufacturer verification important for procurement.
Applications
Transient Protection
Used to clamp short-duration voltage spikes in electronic circuits.
Power Interfaces
Suitable for protection at power and input interfaces when voltage ratings are properly selected.
Industrial Electronics
Can provide surge protection in industrial control and equipment circuits.
General Surge Protection
Suitable for general-purpose transient suppression within the specified pulse limits.
Disclaimer
The information provided on this page is for reference and product identification purposes only. Verify the exact manufacturer, electrical ratings, package, polarity, and surge requirements against the applicable datasheet before use.
