Home > The Posts > Product Guides > BC846BLT1G onsemi | NPN Transistor Datasheet, Pinout, Specifications & Equivalent
BC846BLT1G - onsemi

BC846BLT1G onsemi | NPN Transistor Datasheet, Pinout, Specifications & Equivalent

Product Technical Guide BC846BLT1G General-Purpose NPN Transistor Technical Guideonsemi BC846BLT1G is a general-purpose NPN bipolar junction transistor featuring a 65V collector-emitter voltage rating,…

In Stock 1,048,408 Available Inventory
Part No.:
BC846BLT1G
Manufacturer:
onsemi
Package:
TO-236-3, SC-59, SOT-23-3
Datasheet:
BC846BLT1G.pdf
Description:
TRANS NPN 65V 0.1A SOT23-3
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

BC846BLT1G onsemi | NPN Transistor Datasheet, Pinout, Specifications & Equivalent

Product Technical Guide
BC846BLT1G General-Purpose NPN Transistor Technical Guide

onsemi BC846BLT1G is a general-purpose NPN bipolar junction transistor featuring a 65V collector-emitter voltage rating, 100mA maximum collector current, 100MHz transition frequency, and compact SOT-23 surface-mount package.

Part NumberBC846BLT1G
Manufactureronsemi
Device TypeNPN Bipolar Transistor
01

Product Introduction

The BC846BLT1G is a general-purpose NPN silicon bipolar junction transistor manufactured by onsemi. It is designed for low-power switching and small-signal amplification in compact electronic circuits.

With a maximum collector-emitter voltage rating of 65V and a continuous collector current rating of 100mA, the BC846BLT1G is suitable for a broad range of signal-conditioning and control applications.

The device belongs to the BC846 transistor family and uses the B gain classification. Its minimum DC current gain is 200 at IC = 2mA and VCE = 5V, providing useful amplification capability in low-current circuits.

A typical transition frequency of approximately 100MHz supports applications requiring small-signal amplification and switching, subject to circuit operating conditions.

The BC846BLT1G is supplied in a three-terminal SOT-23 package, making it suitable for automated surface-mount assembly and space-constrained printed circuit boards.

Typical uses include transistor switching stages, signal amplification, logic interfacing, sensor circuits, and low-current load control.

02

Key Benefits

65V Voltage Capability

Supports low-power switching and signal circuits requiring a relatively high collector-emitter voltage rating.

High DC Current Gain

B gain classification provides a minimum hFE of 200 under specified test conditions.

Compact SOT-23 Package

Three-terminal surface-mount construction supports high-density PCB designs and automated assembly.

Versatile Circuit Integration

Suitable for signal amplification, logic switching, sensor interfacing, and low-current driver stages.

03

Features

  • General-purpose NPN silicon bipolar junction transistor
  • Single-transistor configuration
  • 65V maximum collector-emitter voltage, VCEO
  • 80V maximum collector-base voltage, VCBO
  • 6V maximum emitter-base voltage, VEBO
  • 100mA maximum continuous collector current
  • Minimum DC current gain of 200 at IC = 2mA and VCE = 5V
  • Typical transition frequency of 100MHz
  • Maximum collector-emitter saturation voltage of 600mV at IC = 100mA and IB = 5mA
  • Low collector leakage current
  • Compact three-pin SOT-23 package
  • Surface-mount construction
  • Junction temperature range of -55°C to +150°C
  • Suitable for switching and linear amplification
  • Lead-free and RoHS-compliant ordering configuration
  • Tape-and-reel packaging for automated assembly

Engineering Note: The BC846BLT1G is intended for low-power applications. Collector current, voltage, and package power dissipation must be evaluated together rather than independently.

04

Package

The BC846BLT1G uses the standard SOT-23-3 / TO-236 surface-mount package.

  • Package: SOT-23
  • Alternative Package Designation: TO-236-3
  • Pin Count: 3
  • Mounting Type: Surface Mount
  • Approximate Body Length: 2.9mm
  • Approximate Body Width: 1.3mm
  • Approximate Body Height: 1.0mm
  • Terminal Configuration: Base, Emitter, Collector
  • Packaging Format: Tape and Reel

The SOT-23 package offers a compact footprint suitable for densely populated circuit boards.

For thermal design, the effective power dissipation depends on ambient temperature, PCB copper area, and mounting conditions. Engineers should use the manufacturer-recommended footprint and thermal parameters.

Package markings should be checked against the official onsemi device-marking information when performing incoming inspection or product authentication.

05

Pinout

The BC846BLT1G has three electrical terminals: Base, Emitter, and Collector.

Pin Symbol Description
1 B Base terminal. Controls transistor conduction through base current.
2 E Emitter terminal. Commonly connected to circuit ground in low-side switching applications.
3 C Collector terminal. Connects to the load or signal path.
Pin 1 – BaseReceives the transistor control or input signal.
Pin 2 – EmitterProvides the emitter connection for the NPN transistor.
Pin 3 – CollectorProvides the collector connection for switching or amplification.

Typical Low-Side Switching Connection: Connect the emitter to ground, the collector to the load, and the opposite side of the load to the positive supply. Drive the base through a suitable current-limiting resistor.

For inductive loads, include an appropriate flyback protection device. Ensure that the transistor's collector voltage and current remain within its ratings during normal operation and switching transients.

Important: Verify the package orientation and pin numbering using the official onsemi package drawing before PCB layout.

06

Specifications

Parameter Value
Part Number BC846BLT1G
Manufacturer onsemi
Device Category Bipolar Junction Transistor
Transistor Polarity NPN
Number of Transistors 1
Collector-Emitter Voltage, VCEO 65V maximum
Collector-Base Voltage, VCBO 80V maximum
Emitter-Base Voltage, VEBO 6V maximum
Continuous Collector Current, IC 100mA maximum
DC Current Gain, hFE 200 minimum at IC = 2mA, VCE = 5V
Transition Frequency, fT 100MHz typical
Collector-Emitter Saturation Voltage 600mV maximum at IC = 100mA, IB = 5mA
Collector Cutoff Current, ICBO 15nA maximum under specified test conditions
Maximum Power Dissipation 300mW under specified mounting conditions
Minimum Junction Temperature -55°C
Maximum Junction Temperature +150°C
Package Type SOT-23-3 / TO-236
Pin Count 3
Mounting Surface Mount
Packaging Tape and Reel
RoHS Compliant

Collector Voltage: The 65V collector-emitter rating allows use in circuits where the collector voltage can exceed ordinary 3.3V, 5V, or 12V logic levels. Appropriate voltage derating should be applied.

Collector Current: The 100mA maximum current rating is not a guarantee that the device can continuously switch 100mA at every ambient temperature or collector-emitter voltage.

DC Gain: The minimum gain of 200 is specified under a particular test condition. Actual gain varies with collector current, temperature, and device variation.

Saturation Operation: When used as a switch, adequate base drive is required to ensure saturation. The specified 600mV maximum saturation voltage is measured with a forced current gain of 20.

Frequency Performance: The 100MHz transition frequency is a small-signal transistor characteristic. It does not imply that the device can switch a 100MHz power load.

Thermal Design: Power dissipation must remain within the limits specified for the package, ambient temperature, and PCB mounting configuration.

07

Equivalent

When searching for a BC846BLT1G equivalent or replacement, engineers should compare transistor polarity, collector-emitter voltage, collector current, DC gain classification, saturation voltage, package, and pin arrangement.

BC846B: A related transistor designation within the BC846 family. The exact manufacturer and package suffix must be checked before substitution.

BC846B,215: A similar BC846B transistor ordering option from another manufacturer. It may be suitable for evaluation when its package and electrical characteristics match the application.

BC847BLT1G: A related onsemi NPN transistor with a lower collector-emitter voltage rating. It should not replace the BC846BLT1G in circuits requiring the full 65V rating.

BC848B: Another general-purpose NPN transistor family. Its lower voltage rating must be considered before use as an alternative.

MMBT3904: A widely used SOT-23 NPN transistor that may be considered for some switching applications. Gain, voltage ratings, saturation behavior, and package pinout must be verified.

Replacement Recommendation: For existing PCB designs, a matching BC846B device with the same pinout and verified electrical ratings is generally the most relevant alternative. Similar transistor names do not guarantee direct interchangeability.

08

Manufacturer

onsemi is a global semiconductor manufacturer supplying power-management devices, discrete semiconductors, sensing technologies, and automotive and industrial semiconductor solutions.

The BC846BLT1G belongs to onsemi's general-purpose transistor portfolio and is intended for low-power switching and linear applications.

Manufacturer Website: www.onsemi.com

Product Datasheet: BC846 / BC847 / BC848 Family Datasheet

Product Reference: BC846BLT1G Distributor Product Listing

When sourcing the device, verify the manufacturer part number, original reel labeling, date code, device marking, packaging condition, and traceability.

09

Applications

Low-Power Switching

Controls low-current electronic loads through a microcontroller or logic signal.

Signal Amplification

Provides small-signal voltage or current amplification in analog circuits.

Logic Interfacing

Supports transistor-based signal inversion, buffering, and level interfacing.

LED Driver Circuits

Switches compatible low-current LED loads using appropriate current-limiting components.

Sensor Signal Conditioning

Provides amplification and switching functions in low-power sensing circuits.

Industrial Control Electronics

Supports auxiliary signal processing and control stages in industrial equipment.

Typical Switching Circuit: In a low-side configuration, connect the emitter to ground and the collector to the load. Connect the opposite end of the load to the positive supply.

Drive the base through a current-limiting resistor. The resistor value should be selected according to the control voltage, expected load current, and required base-drive margin.

Base Resistor Example: For a 5V logic signal, an assumed 0.7V base-emitter voltage, and a 20mA collector load, a forced gain of 10 requires approximately 2mA of base current. The calculated resistor is (5V - 0.7V) / 2mA = 2.15kΩ. A nearby standard value can be selected after verifying the controller output-current capability and transistor saturation requirements.

Small-Signal Amplification: The BC846BLT1G can be used in common-emitter amplifier stages with suitable collector and emitter bias resistors. The operating point should be chosen to maintain the transistor in its active region.

Inductive Load Switching: When switching relays or small inductive loads, use appropriate flyback suppression to prevent excessive collector voltage during turn-off.

PCB Design: Keep sensitive analog signal paths away from high-current switching traces. Minimize unnecessary parasitic capacitance in higher-frequency signal applications.

Design Validation: Check collector current, collector-emitter voltage, base drive, saturation voltage, power dissipation, and junction temperature under worst-case operating conditions.

10

Disclaimer

This technical guide is provided for product identification, engineering reference, and procurement support. All electrical characteristics, package dimensions, pin assignments, current limits, thermal ratings, and environmental specifications should be verified against the latest official onsemi datasheet before design or purchase. Typical performance values are not guaranteed under all operating conditions. Suggested alternatives are not guaranteed pin-compatible or electrically equivalent. Circuit designers are responsible for voltage and current derating, thermal management, switching-transient protection, and application-level validation. Product availability, lifecycle status, and pricing may change without notice.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```