Home > The Posts > Product Guides > BQ7693003DBTR Datasheet, Pinout, Equivalent & Applications
BQ7693003DBTR - Texas Instruments

BQ7693003DBTR Datasheet, Pinout, Equivalent & Applications

Battery Management & Protection ICs BQ7693003DBTR 6- to 10-Series Cell Battery MonitorThe BQ7693003DBTR is a battery analog front-end (AFE) monitor from Texas Instruments, designed for 6- to 10-series …

In Stock 4,682 Available Inventory
Part No.:
BQ7693003DBTR
Manufacturer:
Texas Instruments
Package:
30-TFSOP (0.173", 4.40mm Width)
Datasheet:
BQ7693003DBTR.pdf
Description:
IC BATT MON MULTI 6-10C 30TSSOP
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

BQ7693003DBTR Datasheet, Pinout, Equivalent & Applications

Battery Management & Protection ICs

BQ7693003DBTR 6- to 10-Series Cell Battery Monitor

The BQ7693003DBTR is a battery analog front-end (AFE) monitor from Texas Instruments, designed for 6- to 10-series lithium-ion and lithium iron phosphate battery packs. It integrates cell voltage monitoring, current measurement, temperature sensing, hardware protection, and cell balancing functions.

6–10 Series Cells 30-Pin TSSOP 3.3V LDO / I²C

1. Product Introduction

The BQ7693003DBTR is a 6- to 10-series cell battery monitor and protection analog front-end (AFE) manufactured by Texas Instruments (TI). It belongs to the BQ769x0 battery monitoring family and is designed for lithium-ion and lithium iron phosphate battery management applications.

As battery-powered equipment becomes increasingly common in electric mobility, industrial energy storage, and portable power systems, accurate battery monitoring has become essential. Individual cell voltage, pack current, and temperature must be continuously monitored to support safe charging, discharging, and battery operation.

The BQ7693003DBTR integrates multiple monitoring and protection functions into one device. Its internal analog-to-digital converter measures individual cell voltages, die temperature, and external thermistor signals. A separate current measurement ADC supports pack current monitoring and coulomb counting.

The device supports battery configurations from 6 to 10 series-connected cells. It communicates with a host microcontroller through an I²C-compatible interface, allowing system designers to implement battery monitoring, protection management, and cell balancing through software.

The BQ7693003DBTR also incorporates hardware protection functions, including overvoltage, undervoltage, overcurrent during discharge, and short-circuit protection. Integrated cell-balancing FETs and low-side N-channel MOSFET drivers help simplify battery management circuit design.

This particular ordering variant is configured with a 3.3V output LDO, a 7-bit I²C address of 0x08, and CRC communication support. It is supplied in a 30-pin TSSOP surface-mount package.

2. Key Benefits

  • 6–10 Cell Battery Monitoring: Supports battery packs with six to ten series-connected cells, making it suitable for medium-voltage battery management systems.
  • Integrated Measurement Functions: Measures individual cell voltages, battery current, internal die temperature, and external thermistor temperatures.
  • Hardware Protection: Includes overvoltage, undervoltage, discharge overcurrent, and short-circuit detection functions.
  • Cell Balancing Support: Integrated cell-balancing FETs help manage differences in individual cell voltages.
  • I²C Communication: Provides a digital interface for communication with an external host microcontroller.
  • 3.3V LDO Output: The BQ7693003DBTR configuration provides a 3.3V regulated output for compatible external circuitry.
  • Low-Side MOSFET Drivers: Provides separate charge and discharge N-channel MOSFET driver outputs.
  • Low-Power Operating Modes: Supports configurable power management and SHIP mode for reduced battery drain.
  • Compact Integration: Combines multiple battery monitoring and protection functions in a 30-pin TSSOP package.

3. Features

The BQ7693003DBTR combines analog measurement, battery protection, and control functions for rechargeable battery systems.

Battery Monitoring Features

  • Supports 6- to 10-series battery configurations.
  • Internal ADC for individual cell voltage measurement.
  • Separate ADC for pack current measurement and coulomb counting.
  • Internal die temperature measurement.
  • Supports up to two external thermistors.
  • Digital communication through an I²C-compatible interface.
  • CRC communication option enabled in the 003 configuration.

Hardware Protection Features

  • Overvoltage (OV) protection.
  • Undervoltage (UV) protection.
  • Overcurrent in discharge (OCD) protection.
  • Short-circuit in discharge (SCD) protection.
  • Secondary protector fault detection.
  • Alert interrupt output for host controller notification.

Additional Functions

  • Integrated cell-balancing FETs.
  • Charge and discharge low-side N-channel MOSFET drivers.
  • 3.3V output LDO for the BQ7693003DBTR configuration.
  • Configurable operating modes, including SHIP mode.
  • Random cell connection tolerant design.
  • No external EEPROM programming required for the factory-configured device options.

These integrated features help reduce external component requirements and simplify the development of battery monitoring and protection circuits.

4. Package

The BQ7693003DBTR uses a 30-pin TSSOP surface-mount package, identified by TI package code DBT.

  • Package Type: TSSOP
  • Package Code: DBT
  • Number of Pins: 30
  • Nominal Body Dimensions: 7.80mm × 4.40mm
  • Nominal Package Height: 1.20mm
  • Mounting Type: Surface Mount
  • Operating Temperature: -40°C to +85°C
  • Packaging: Tape and Reel
  • Standard Reel Quantity: 2,000 pieces

The TSSOP package provides a compact solution for battery management PCBs where multiple cell-sensing connections, communication signals, and MOSFET control signals must be integrated into a limited board area.

For PCB layout and assembly, designers should refer to the official Texas Instruments mechanical package drawing, recommended land pattern, soldering requirements, and moisture sensitivity information.

5. Pinout

The BQ7693003DBTR contains 30 pins, including battery cell sensing inputs, current sensing terminals, temperature sensing inputs, communication interfaces, power connections, and charge/discharge MOSFET driver outputs.

Pin Symbol Description
1 DSG Discharge MOSFET driver output
2 CHG Charge MOSFET driver output
3 VSS Device ground reference
4 SDA I²C serial data input/output
5 SCL I²C serial clock input
6 TS1 External thermistor 1 input
7 CAP1 Internal regulator capacitor connection
8 REGOUT Regulated output voltage
9 REGSRC Regulator input supply source
10 VC5X Thermistor 2 negative reference / cell group supply
11 NC No connect; short to CAP2 as specified
12 NC No connect; short to CAP2 as specified
13 TS2 External thermistor 2 input
14 CAP2 Second internal regulator capacitor connection
15 BAT Top battery terminal supply
16 VC10 10th cell positive sensing input
17 VC9 9th cell positive sensing input
18 VC8 8th cell positive sensing input
19 VC7 7th cell positive sensing input
20 VC6 6th cell positive sensing input
21 VC5B 6th cell negative sensing input
22 VC5 5th cell positive sensing input
23 VC4 4th cell positive sensing input
24 VC3 3rd cell positive sensing input
25 VC2 2nd cell positive sensing input
26 VC1 1st cell positive sensing input
27 VC0 1st cell negative sensing input
28 SRP Negative current-sense input
29 SRN Positive current-sense input
30 ALERT Alert output and override input

Important Pin Functions

VC0–VC10: These pins provide individual battery cell voltage sensing connections. They allow the device to monitor the voltage of each cell in a series-connected battery pack.

SRP and SRN: These pins measure the voltage across an external current-sense resistor, supporting battery charge and discharge current monitoring.

SDA and SCL: These pins provide the I²C communication interface between the battery monitor and the host microcontroller.

CHG and DSG: These outputs control external charge and discharge N-channel MOSFETs, allowing the battery management system to manage current flow.

TS1 and TS2: These inputs support external thermistor measurements for battery temperature monitoring.

Important: The NC pins have specific connection requirements in the TI reference design. They must not be treated as unrestricted unused pins. Follow the official datasheet pin instructions and reference schematic.

6. Specifications

The following table summarizes the main technical specifications and factory-configured characteristics of the BQ7693003DBTR.

Parameter Specification
Manufacturer Texas Instruments
Part Number BQ7693003DBTR
Product Family BQ769x0
Device Type Battery Monitor / Analog Front End
Supported Cell Configuration 6–10 Series Cells
Battery Chemistry Lithium-Ion / Lithium Iron Phosphate
Cell Voltage Operating Range 2V to 5V per cell, recommended operating conditions
Pack Supply Operating Range 6V to 25V for the specified battery supply group
Maximum Absolute Supply Rating 36V, specified battery supply group
Output LDO 3.3V
I²C Address 0x08 (7-bit)
CRC Option Enabled
Cell Voltage Measurement Internal ADC
Current Measurement Separate ADC / Coulomb Counter
External Thermistor Support Up to 2
Protection Functions OV, UV, OCD, SCD
Cell Balancing Integrated Balancing FETs
MOSFET Drivers Charge and Discharge Low-Side NCH Drivers
Communication Interface I²C-Compatible
Operating Temperature -40°C to +85°C
Package 30-Pin TSSOP
Package Code DBT
Mounting Type Surface Mount
Product Status ACTIVE

Electrical specification note: The 6V–25V operating supply range and 36V absolute maximum rating refer to the specified BQ76930 battery supply group. Absolute maximum ratings are stress limits, not recommended operating voltages. Cell input differential voltage and other pin limits must also be observed.

7. Equivalent

When searching for a BQ7693003DBTR equivalent, engineers should distinguish between an identical ordering variant, a related member of the BQ76930 family, and a newer battery monitor with similar functionality.

Related BQ76930 Ordering Variants

Part Number Cells LDO CRC Package
BQ7693000DBTR 6–10 2.5V No 30-TSSOP
BQ7693001DBTR 6–10 2.5V Yes 30-TSSOP
BQ7693002DBTR 6–10 3.3V No 30-TSSOP
BQ7693003DBTR 6–10 3.3V Yes 30-TSSOP
BQ7693006DBTR 6–10 3.3V No 30-TSSOP
BQ7693007DBTR 6–10 3.3V Yes 30-TSSOP

These ordering variants share the BQ76930 hardware platform, but their factory-programmed LDO voltage, I²C address, and CRC settings differ. The BQ7693003DBTR specifically uses a 3.3V LDO, I²C address 0x08, and CRC enabled.

Other Battery Monitor Alternatives

  • BQ76920: A related TI battery monitor designed for 3- to 5-series cell configurations. It is not a direct replacement for a 6- to 10-series design.
  • BQ76940: A related device designed for 9- to 15-series battery packs. It uses a different package and pin configuration.
  • BQ76942: A newer TI battery monitor and protector family member that may be considered for redesigned battery management systems. Its architecture, configuration, interface, and PCB requirements must be evaluated separately.

Replacement Selection Considerations

Before replacing the BQ7693003DBTR, engineers should verify:

  • Supported number of series-connected cells.
  • Cell voltage measurement range and accuracy.
  • Current measurement and coulomb-counting characteristics.
  • Overvoltage, undervoltage, overcurrent, and short-circuit protection thresholds.
  • Cell-balancing capabilities.
  • External thermistor support.
  • I²C address and CRC communication configuration.
  • Regulator output voltage and current capability.
  • Package dimensions and pin assignments.

Important: Related models are not automatically pin-to-pin replacements. Battery monitor ICs are safety-related components. Any substitution requires a complete electrical, firmware, protection, and PCB compatibility review.

8. Manufacturer

Texas Instruments (TI) is a global semiconductor manufacturer specializing in analog ICs, embedded processors, power management devices, interface products, and sensing technologies.

TI provides a broad portfolio of battery management solutions for rechargeable battery systems, including battery monitors, battery protectors, charging controllers, fuel gauges, and power management devices.

The BQ769x0 family is designed to support multi-cell lithium-ion and lithium iron phosphate battery packs. These devices combine analog front-end measurement functions with hardware protection features, helping system designers develop battery management systems for industrial, transportation, and energy storage applications.

The BQ7693003DBTR is specifically configured for 6- to 10-series cell monitoring, with a 3.3V LDO output and CRC-enabled I²C communication.

Official manufacturer website: Texas Instruments.

Official product page: BQ7693003DBTR Product Information.

9. Applications

The BQ7693003DBTR is designed for rechargeable battery systems that require multi-cell voltage monitoring, current measurement, temperature monitoring, and hardware protection.

  • Electric Bicycles: Supports battery monitoring and protection in multi-cell e-bike battery packs.
  • Electric Scooters: Provides cell voltage, current, and temperature monitoring for electric mobility battery systems.
  • Power Tools: Supports battery protection and cell balancing in rechargeable industrial and portable power tools.
  • Energy Storage Systems: Helps monitor multi-cell lithium battery modules used in energy storage equipment.
  • Uninterruptible Power Supplies: Supports battery monitoring and protection in UPS backup power systems.
  • Battery Backup Units: Provides monitoring and protection functions for rechargeable battery backup modules.
  • Industrial Battery Packs: Supports battery management in industrial equipment requiring 6- to 10-series cell configurations.
  • LiFePO4 Battery Systems: Supports suitable lithium iron phosphate battery management designs.

Why the BQ7693003DBTR Matters in Battery Management

One of the major challenges in multi-cell battery design is maintaining balanced operating conditions across individual cells. Differences in cell capacity, internal resistance, temperature, and aging can lead to variations in cell voltage during charging and discharging.

The BQ7693003DBTR addresses these requirements by integrating individual cell voltage measurement, pack current sensing, temperature monitoring, and cell-balancing support into a single analog front-end device.

Its hardware protection functions provide additional support for detecting abnormal operating conditions. The host microcontroller can access measurement information through I²C and coordinate the broader battery management strategy.

For applications requiring compact multi-cell battery monitoring, this integration can help reduce circuit complexity and simplify the development of battery management hardware.

Design Considerations

When designing with the BQ7693003DBTR, engineers should carefully consider cell-sensing resistor networks, input filtering, current-sense resistor selection, thermistor placement, and external MOSFET characteristics.

Battery cell connections must follow the required sensing sequence and voltage limits. Proper PCB layout is especially important for high-current paths and low-level current-sense signals.

The I²C communication configuration must also match the host controller firmware, including the factory-programmed address and CRC option. Protection thresholds and timing parameters should be configured and validated according to the battery chemistry and system requirements.

Because battery protection is safety-critical, the complete system should undergo electrical, thermal, fault-condition, and battery-pack validation before production.

10. Disclaimer

This product information is provided for general technical reference, component selection, and engineering evaluation purposes. Product specifications and electrical characteristics are based on available Texas Instruments documentation and may be updated by the manufacturer.

Customers and design engineers should consult the latest official BQ769x0 datasheet to verify recommended operating conditions, absolute maximum ratings, pin functions, electrical characteristics, and package requirements before using the device in production designs.

Alternative devices listed in this article are provided for preliminary comparison only. Functional similarity does not guarantee pin-to-pin compatibility, firmware compatibility, or electrical interchangeability.

Battery management and protection circuits must be designed, tested, and validated according to applicable battery safety standards and the requirements of the final application.

Technical Reference

Manufacturer: Texas Instruments

Product: BQ7693003DBTR

Product Family: BQ769x0

Official Product Page: BQ7693003DBTR

Official Datasheet: BQ769x0 Battery Monitor Family Datasheet (PDF)

```

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```