Home > The Posts > Product Guides > DRV8889QWRGERQ1 TI Automotive Stepper Motor Driver – Datasheet, Pinout, Specifications & Equivalent
DRV8889QWRGERQ1 - Texas Instruments

DRV8889QWRGERQ1 TI Automotive Stepper Motor Driver – Datasheet, Pinout, Specifications & Equivalent

Product Technical Guide DRV8889QWRGERQ1 Automotive Stepper Motor Driver Technical GuideTexas Instruments automotive bipolar stepper motor driver featuring a 4.5V to 45V supply, 1.5A full-scale current,…

In Stock 0 Available Inventory
Part No.:
DRV8889QWRGERQ1
Manufacturer:
Texas Instruments
Package:
24-VFQFN Exposed Pad
Datasheet:
DRV8889QWRGERQ1.pdf
Description:
AUTOMOTIVE STEPPER DRIVER
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

DRV8889QWRGERQ1 TI Automotive Stepper Motor Driver – Datasheet, Pinout, Specifications & Equivalent

Product Technical Guide
DRV8889QWRGERQ1 Automotive Stepper Motor Driver Technical Guide

Texas Instruments automotive bipolar stepper motor driver featuring a 4.5V to 45V supply, 1.5A full-scale current, 1/256 microstepping, integrated current sensing, smart tune decay, and stall detection.

Part NumberDRV8889QWRGERQ1
ManufacturerTexas Instruments
Device TypeAutomotive Stepper Motor Driver
01

Product Introduction

The DRV8889QWRGERQ1 is an automotive-qualified bipolar stepper motor driver manufactured by Texas Instruments. It integrates two H-bridges, current regulation, a microstepping indexer, and diagnostic features into a compact semiconductor package.

The device operates from a 4.5V to 45V motor supply and supports up to 1.5A full-scale winding current, with a specified peak output-current capability of 2.4A under applicable conditions.

Its internal microstepping indexer supports resolutions up to 1/256 step, allowing smoother motion and finer positioning than conventional full-step operation.

The driver also incorporates integrated current sensing, eliminating the need for two external current-sense resistors in typical applications. TI's smart tune decay technology helps optimize winding-current regulation.

Advanced stall detection, SPI diagnostics, programmable output slew rate, and multiple protection functions make the DRV8889QWRGERQ1 suitable for automotive actuators and precision motion-control systems.

The part uses a 24-pin, 4mm × 4mm VQFN package with wettable flanks and an exposed thermal pad.

02

Key Benefits

Precise Motor Positioning

Up to 1/256 microstepping enables fine position control and smoother motor movement.

Integrated Current Sensing

Eliminates external winding-current sense resistors, reducing component count and PCB area.

Stall Detection

Integrated diagnostics help identify stalled motor conditions without requiring an external position sensor in suitable applications.

Automotive Protection

Integrated electrical and thermal protection features support robust automotive motor-control designs.

03

Features

  • AEC-Q100 qualified automotive stepper motor driver
  • Integrated dual H-bridge architecture for one bipolar stepper motor
  • 4.5V to 45V operating motor-supply voltage
  • 1.5A full-scale winding-current capability
  • 2.4A peak output-current capability
  • Up to 1/256 microstepping resolution
  • Integrated winding-current sensing without external sense resistors
  • Smart tune current-decay technology
  • Configurable slow and mixed decay modes
  • Eight current-decay mode options
  • STEP and DIR motor-control interface
  • Four-wire SPI interface for configuration and diagnostics
  • SPI daisy-chain support
  • Programmable torque DAC for current scaling
  • Configurable PWM current-chopping off-time
  • Advanced motor stall-detection algorithm
  • Open-load detection
  • Programmable output slew rate
  • Spread-spectrum clocking for EMI reduction
  • Typical 2µA low-current sleep mode
  • Motor-supply undervoltage lockout
  • Overcurrent protection
  • Overtemperature warning and shutdown
  • Undertemperature warning
  • Dedicated nFAULT status output
  • Functional Safety-Capable documentation support
  • Compact 24-pin VQFN package with wettable flanks
04

Package

The DRV8889QWRGERQ1 is supplied in the RGE 24-pin VQFN package, incorporating wettable flanks and an exposed thermal pad.

  • Package Type: VQFN
  • Package Code: RGE
  • Pin Count: 24
  • Nominal Body Dimensions: 4mm × 4mm
  • Thermal Feature: Exposed Thermal Pad
  • Lead Feature: Wettable Flanks
  • Mounting Type: Surface Mount
  • Standard Packaging: Tape and Reel
  • Standard Reel Quantity: 3,000 pieces

The exposed thermal pad must be connected and laid out according to TI's package and thermal-design recommendations. Proper PCB copper area, thermal vias, and current routing help manage power dissipation during motor operation.

Wettable flanks support solder-joint inspection in automotive production environments.

05

Pinout

The DRV8889QWRGERQ1 pinout below follows the official TI WRGE 24-pin VQFN top-view configuration.

Pin Signal Function
1 VM Motor power supply
2 PGND Power ground
3 AOUT1 H-bridge A output 1
4 AOUT2 H-bridge A output 2
5 BOUT2 H-bridge B output 2
6 BOUT1 H-bridge B output 1
7 PGND Power ground
8 VM Motor power supply
9 GND Signal ground
10 DVDD Internal digital regulator output
11 nFAULT Active-low fault indication
12 VREF Motor-current reference input
13 nSCS SPI chip-select input, active low
14 VSDO SPI output logic supply
15 SDO SPI serial data output
16 SDI SPI serial data input
17 SCLK SPI serial clock
18 STEP Step command input
19 DIR Direction control input
20 DRVOFF Output-driver disable control
21 nSLEEP Active-low sleep control
22 CPL Charge-pump flying-capacitor terminal
23 CPH Charge-pump flying-capacitor terminal
24 VCP Charge-pump output
Thermal Pad PAD Exposed thermal pad; follow TI grounding and layout guidance

Pinout Note: This table applies to the RGE VQFN package, not the PWP HTSSOP package. The two package variants have different physical pin assignments.

Use the official manufacturer package drawing when preparing PCB footprints and placing charge-pump capacitors, motor-supply bypass capacitors, and the motor winding connections.

06

Specifications

Parameter Value
Part Number DRV8889QWRGERQ1
Manufacturer Texas Instruments
Product Family DRV8889-Q1
Device Type Bipolar Stepper Motor Driver
Qualification AEC-Q100 Automotive
Operating Supply Voltage 4.5V to 45V
Absolute Maximum Supply Rating 50V
Full-Scale Winding Current 1.5A
Peak Output Current 2.4A
Number of Full Bridges 2
Motor Type One Bipolar Stepper Motor
Microstepping Resolution Up to 1/256
Combined HS + LS RDS(on) 900mΩ Typical at 25°C
Current Sensing Integrated
External Sense Resistors Not Required
Control Interface STEP/DIR
Configuration Interface Four-Wire SPI
SPI Daisy Chaining Supported
Decay Modes Smart Tune, Slow, Mixed
Decay Mode Options 8
Stall Detection Yes
Open-Load Detection Yes
Programmable Slew Rate Yes
Spread-Spectrum Clocking Yes
Typical Sleep Current 2µA
Undervoltage Lockout Yes
Overcurrent Protection Yes
Thermal Protection Warning and Shutdown
Operating Temperature Range -40°C to +125°C
Package VQFN (RGE)
Package Dimensions 4mm × 4mm
Pin Count 24
Package Feature Wettable Flanks, Exposed Thermal Pad
Packaging Tape and Reel, 3,000 Pieces
Lifecycle Status ACTIVE

Engineering Note: The 2.4A peak rating is not the same as the 1.5A full-scale winding-current rating. Actual usable motor current depends on thermal design, supply voltage, switching conditions, and the motor's electrical characteristics.

07

Equivalent

When selecting a DRV8889QWRGERQ1 equivalent, replacement, or alternative, evaluate motor supply voltage, winding-current rating, package pinout, SPI register behavior, microstepping capability, current regulation, and stall-detection functionality.

DRV8889AQWRGERQ1: A closely related automotive device with the same nominal 4mm × 4mm VQFN package and core motor-driver architecture. The DRV8889A-Q1 includes differences in diagnostic configurability, including programmable open-load detection timing. Firmware and register-level compatibility must be checked.

DRV8889QPWPRQ1: The same DRV8889-Q1 device in a 24-pin HTSSOP package. It can be considered for a redesigned PCB but is not a footprint-compatible substitute for the RGE VQFN version.

DRV8899QWRGERQ1: A related lower-current automotive stepper-driver variant with a nominal 1A full-scale current and different output-stage resistance. It is not suitable as a direct substitute where 1.5A winding current is required.

Replacement Recommendation: For existing production boards, prioritize the exact DRV8889QWRGERQ1 ordering number. Validate package mapping, thermal design, motor current, SPI registers, diagnostic behavior, and automotive qualification before approving alternatives.

08

Manufacturer

Texas Instruments Incorporated (TI) manufactures analog, embedded-processing, motor-control, and power-management semiconductor products for automotive, industrial, communications, and electronic systems.

The DRV8889-Q1 is part of TI's automotive stepper motor-driver portfolio. It integrates motor-current regulation, microstepping, and diagnostic functions to reduce the external circuitry required for many motion-control applications.

Official Product Page: DRV8889QWRGERQ1 – Texas Instruments

Official Datasheet: DRV8889-Q1 and DRV8889A-Q1 Datasheet

Evaluation Platform: DRV8889-Q1EVM

09

Applications

Adaptive Headlight Systems

Stepper motor positioning for headlamp leveling and directional lighting actuators.

Automotive Instrumentation

Precise motion control for stepper-based indicators and electromechanical displays.

Automotive Actuators

Controlled movement of compatible low- and medium-current positioning mechanisms.

HVAC Positioning

Stepper motor control for airflow doors and climate-control positioning systems.

Precision Motion Control

Fine positioning and stall monitoring in compact electromechanical equipment.

Motor-Control Development

Prototype and evaluation platforms requiring SPI diagnostics and microstepping.

10

Disclaimer

This technical guide is provided for product identification, general engineering reference, and procurement support. All electrical ratings, pin assignments, motor-current limits, thermal conditions, functional-safety considerations, qualification status, and lifecycle information must be verified against the latest official Texas Instruments documentation before design or purchase. Suggested equivalent or alternative devices are not guaranteed pin-to-pin or firmware-compatible replacements. Pricing and inventory availability may change without notice.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```