Home > The Posts > Product Guides > ESDCAN24-2BLY STMicroelectronics
ESDCAN24-2BLY - STMicroelectronics

ESDCAN24-2BLY STMicroelectronics

Automotive Electronics | TVS Diodes | CAN Bus ProtectionESDCAN24-2BLY Automotive Dual-Line TVS Diode – Specifications, Pinout, Features and ApplicationsManufacturer: STMicroelectronicsPart Number: ESD…

In Stock 298,081 Available Inventory
Part No.:
ESDCAN24-2BLY
Manufacturer:
STMicroelectronics
Package:
TO-236-3, SC-59, SOT-23-3
Datasheet:
ESDCAN24-2BLY.pdf
Description:
TVS DIODE 24VWM 40VC SOT23-3
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

ESDCAN24-2BLY STMicroelectronics

Product Technical Guide
ESDCAN24-2BLY Automotive CAN Bus TVS Diode Technical Guide

STMicroelectronics AEC-Q101-qualified dual-line bidirectional transient voltage suppressor for automotive CAN bus interfaces, featuring a 24V reverse stand-off voltage, 27V minimum breakdown voltage, and compact SOT23-3L packaging.

Part NumberESDCAN24-2BLY
ManufacturerSTMicroelectronics
Device TypeAutomotive Dual-Line TVS Diode
01

Product Introduction

The ESDCAN24-2BLY is an automotive-grade dual-line bidirectional transient voltage suppressor manufactured by STMicroelectronics. It is designed to protect CAN_H and CAN_L communication signals against electrostatic discharge (ESD) and electrical overstress (EOS).

The device belongs to the ESDCANxx-2BLY family and is intended for CAN transceiver protection in automotive 12V electrical systems.

Its two protection channels share a common reference connection, allowing both communication lines to be protected using a single three-terminal component.

The ESDCAN24-2BLY provides a 24V reverse stand-off voltage and a breakdown voltage specified between 27V and 32V at the manufacturer's defined test current.

It supports specified automotive electrical transient tests, including ISO 7637-3, and withstands ESD events up to ±30kV under the stated ISO 10605 test configurations.

The device is supplied in a compact SOT23-3L surface-mount package, with an operating temperature range of -40°C to +150°C and AEC-Q101 automotive qualification.

Its combination of dual-line protection, compact dimensions, and automotive reliability makes it suitable for vehicle electronic control units, communication interfaces, diagnostic modules, and other CAN-based electronic systems.

02

Key Benefits

Dual-Line ESD Protection

Protects CAN_H and CAN_L communication lines against specified electrostatic discharge and electrical transient events.

Automotive Qualification

AEC-Q101 qualification supports automotive electronic applications requiring component-level reliability assessment.

Transient Suppression

A 24V stand-off rating and specified clamping performance support protection of compatible automotive CAN interfaces.

Compact Package

The three-lead SOT23 package enables two-line protection with minimal PCB component count.

03

Features

  • Automotive-grade dual-line transient voltage suppressor
  • Bidirectional protection architecture
  • Designed for CAN_H and CAN_L communication interfaces
  • 24V reverse stand-off voltage
  • 27V minimum and 32V maximum breakdown voltage at 1mA
  • 0.1µA maximum reverse leakage current at the specified stand-off voltage
  • 43V maximum clamping voltage at 5A using an 8/20µs pulse
  • 30pF maximum line capacitance under specified measurement conditions
  • Maximum pulse power up to 230W for the product family under the specified 8/20µs waveform
  • ISO 10605 ESD withstand capability up to ±30kV under specified configurations
  • ISO 7637-3 transient protection capability
  • IEC 61000-4-4 EFT test level of 4kV
  • AEC-Q101 automotive qualification
  • Operating temperature range from -40°C to +150°C
  • SOT23-3L surface-mount package
  • ECOPACK2 and RoHS-compliant construction
  • J-STD-020 moisture sensitivity level 1

Design Note: The ESDCAN24-2BLY is intended for compatible automotive CAN communication interfaces. Higher-speed applications such as CAN-FD require evaluation of line capacitance, signal integrity, transceiver requirements, and PCB layout.

04

Package

The ESDCAN24-2BLY uses the SOT23-3L package, a compact three-terminal surface-mount housing commonly used for small-signal semiconductors and circuit protection devices.

  • Package Type: SOT23-3L
  • Pin Count: 3
  • Mounting Type: Surface Mount
  • Approximate Package Dimensions: 2.9 × 2.45 × 1.1mm, as listed by ST
  • Qualification: Automotive AEC-Q101
  • Moisture Sensitivity: MSL 1
  • Environmental Grade: ECOPACK2
  • Packaging: Tape and reel

The compact SOT23-3L footprint makes the device suitable for protection circuits located close to automotive CAN connectors and transceiver interfaces.

For effective ESD suppression, designers should minimize parasitic inductance in the connections between the TVS device, signal traces, and the reference return path.

The official STMicroelectronics package drawing and footprint documentation should be used for PCB layout and automated assembly.

05

Pinout

The ESDCAN24-2BLY pinout provides two protected signal terminals and one common reference terminal.

Pin Signal Function
1 IO1 Protected communication-line connection, typically CAN_H or CAN_L.
2 GND Common reference connection for the two protection elements.
3 IO2 Second protected communication-line connection, typically CAN_L or CAN_H.
Pin 1 – IO1Connects to one CAN communication line for transient voltage suppression.
Pin 2 – GNDProvides the common reference and surge-current return path.
Pin 3 – IO2Connects to the second CAN communication line.

Important: Confirm the package orientation and terminal numbering against the official STMicroelectronics datasheet before PCB fabrication. The protection layout must also be evaluated for grounding, transient current paths, and signal integrity.

06

Specifications

Parameter Value
Part Number ESDCAN24-2BLY
Manufacturer STMicroelectronics
Product Family ESDCANxx-2BLY
Device Type Automotive Dual-Line TVS Diode
Protection Channels 2
Protection Polarity Bidirectional
Reverse Stand-Off Voltage (VRM) 24V
Maximum Reverse Leakage Current (IRM) 0.1µA at VRM
Breakdown Voltage (VBR) 27V minimum, 32V maximum
Breakdown Test Current 1mA
Maximum Clamping Voltage (VCL) 43V at 5A, 8/20µs
ISO 7637-3 Pulse 3a Clamping -40V minimum under specified test conditions
ISO 7637-3 Pulse 3b Clamping +40V maximum under specified test conditions
Maximum Line Capacitance 30pF under specified measurement conditions
Peak Pulse Power Up to 230W, family rating, 8/20µs
ESD Capability Up to ±30kV, specified ISO 10605 configurations
Operating Temperature Range -40°C to +150°C
Package SOT23-3L
Number of Pins 3
Automotive Qualification AEC-Q101
Moisture Sensitivity Level MSL 1
RoHS Compliance ECOPACK2
Product Status ACTIVE

Stand-Off Voltage: The 24V rating represents the specified reverse working voltage, not the nominal voltage of the vehicle battery or the TVS clamping threshold.

Breakdown Voltage: The device begins its specified breakdown behavior within the 27V to 32V range at a test current of 1mA.

Clamping Performance: The 43V maximum clamping voltage is specified at 5A under an 8/20µs pulse. Actual voltage during a transient depends on the current waveform and circuit conditions.

Signal Integrity: The line capacitance should be evaluated against the requirements of the selected CAN transceiver and communication speed.

Thermal Consideration: Peak pulse ratings do not represent continuous power dissipation capability. Repetitive transient stress and thermal conditions must remain within the manufacturer's limits.

07

Equivalent

When selecting an ESDCAN24-2BLY equivalent, replacement, or alternative, compare reverse stand-off voltage, breakdown voltage, clamping performance, surge capability, line capacitance, package dimensions, pinout, and automotive qualification.

ESDCAN01-2BLY: A related STMicroelectronics dual-line CAN protection device in the SOT23-3L family. It has a 24V stand-off voltage but a different breakdown-voltage range. It is a comparison candidate rather than an automatically approved direct substitute.

ESDCAN04-2BLY: A related dual-line TVS with a 25.5V stand-off voltage and different capacitance and electrical characteristics. Verify protection coordination and communication requirements before considering replacement.

ESDCAN06-2BLY: A family member intended for higher-voltage operating conditions. Its higher breakdown and clamping characteristics make it unsuitable as a direct replacement without circuit-level evaluation.

Alternative Selection: Other automotive-qualified dual-line CAN TVS products may be evaluated when their electrical ratings, physical pin arrangement, qualification documentation, and application requirements match the original design.

Replacement Recommendation: For an existing PCB, retain ESDCAN24-2BLY or use an engineering-approved equivalent. Do not assume devices with the same SOT23 package are pin-compatible or provide equivalent protection.

08

Manufacturer

STMicroelectronics is a global semiconductor manufacturer providing products for automotive, industrial, consumer, communication, and embedded electronic systems.

Its portfolio includes microcontrollers, analog integrated circuits, power management devices, power semiconductors, sensors, and electrical protection components.

The ESDCAN24-2BLY is part of the company's automotive ESD protection portfolio and is intended for CAN bus transient suppression in 12V vehicle systems.

Official Product Page: ESDCAN24-2BLY – STMicroelectronics

Official Datasheet: ESDCANxx-2BLY Automotive Dual-Line TVS Datasheet

Manufacturer Website: www.st.com

For procurement, confirm the full part number, authorized supply channel, traceability documentation, packaging, and product lifecycle status.

09

Applications

Automotive CAN Bus

Protection of CAN_H and CAN_L communication lines against specified ESD and electrical transients.

Electronic Control Units

Transient suppression for communication interfaces in automotive electronic control modules.

Body Control Modules

Protection of CAN communication interfaces used in vehicle lighting, convenience, and body electronics.

Battery Management Systems

Protection of appropriate CAN communication connections between battery controllers and vehicle electronics.

Automotive Diagnostics

Transient protection for CAN-based diagnostic and service communication interfaces.

Industrial CAN Networks

Protection of compatible industrial communication interfaces where the electrical and environmental ratings are appropriate.

Application Note: Position the TVS device to provide a low-inductance transient current path, particularly near exposed connectors. Verify compatibility with the CAN transceiver's absolute maximum ratings, common-mode operating range, and the required automotive transient test levels.

10

Disclaimer

This technical guide is provided for general product identification, engineering reference, and procurement support. Electrical characteristics, ESD test performance, surge ratings, terminal assignments, package dimensions, qualification status, and product availability should be verified against the latest STMicroelectronics documentation before design or purchase. Suggested alternatives are not guaranteed direct replacements. Actual circuit protection depends on the complete application design, PCB layout, and operating conditions. Prices and availability may change without notice.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```