ICM-42688-P TDK InvenSense 6-Axis IMU Sensor
Product Technical Guide ICM-42688-P TDK InvenSense 6-Axis IMU Sensor Technical Guide Explore the TDK InvenSense ICM-42688-P, a high-precision 6-axis MEMS MotionTracking sensor combining a 3-axis gyrosc…
- Part No.:
- ICM-42688-P
- Manufacturer:
- TDK InvenSense
- Package:
- -
- Datasheet:
- ICM-42688-P.pdf
- Description:
- MOTION SENSOR
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
ICM-42688-P TDK InvenSense 6-Axis IMU Sensor
Explore the TDK InvenSense ICM-42688-P, a high-precision 6-axis MEMS MotionTracking sensor combining a 3-axis gyroscope and 3-axis accelerometer with SPI, I2C, and I3C communication, advanced motion detection, and a compact 14-pin LGA package.
Product Introduction
The ICM-42688-P is a high-performance 6-axis inertial measurement unit developed by TDK InvenSense. It combines a 3-axis MEMS gyroscope and a 3-axis MEMS accelerometer in a compact semiconductor package.
Designed for precise motion measurement, the device detects angular velocity and linear acceleration along three orthogonal axes.
The ICM-42688-P offers selectable gyroscope measurement ranges from approximately ±15.625°/s to ±2000°/s and accelerometer ranges of ±2g, ±4g, ±8g, and ±16g.
It supports SPI, I2C, and I3C communication interfaces, enabling integration with microcontrollers, embedded processors, and advanced sensor-processing systems.
The device incorporates programmable digital filters, FIFO buffering, interrupt functions, and an embedded APEX motion-processing engine.
Typical applications include robotics, AR/VR/XR equipment, wearable devices, motion tracking, industrial monitoring, and high-performance IoT systems.
Product Status: TDK currently identifies the ICM-42688-P as a production device.
Key Benefits
High-Precision Motion Sensing
Integrated 3-axis gyroscope and accelerometer support accurate angular-rate and acceleration measurement.
Low-Noise Performance
Typical gyroscope noise density of 2.8 mdps/√Hz and accelerometer noise density of 70µg/√Hz support demanding motion applications.
Flexible Digital Interfaces
Supports SPI, I2C, and I3C host communication for compatibility with different embedded platforms.
Embedded Motion Processing
APEX functions support motion events such as pedometer operation, tilt detection, tap detection, and wake-on-motion.
Features
- TDK InvenSense MotionTracking technology
- Integrated 3-axis MEMS gyroscope
- Integrated 3-axis MEMS accelerometer
- Six-axis motion sensing
- Gyroscope full-scale ranges from ±15.625°/s to ±2000°/s
- Accelerometer full-scale ranges of ±2g, ±4g, ±8g, and ±16g
- Typical gyroscope noise density of 2.8 mdps/√Hz
- Typical accelerometer noise density of 70µg/√Hz
- SPI interface supporting up to 24MHz
- I2C interface supporting up to 1MHz
- I3C interface supporting up to 12.5MHz
- Programmable digital low-pass filters
- FIFO buffering for sensor data
- Embedded temperature sensor
- External clock input support
- External frame synchronization capability
- Programmable interrupt outputs
- APEX pedometer function
- APEX tilt detection
- APEX tap detection
- Wake-on-motion detection
- Significant motion detection
- Raise-to-wake and raise-to-sleep functionality
- Low-noise six-axis operating mode
- Compact 14-pin LGA package
- Operating temperature range of -40°C to +85°C
Technical Note: Sensor performance depends on selected measurement ranges, filter configuration, output data rate, mechanical mounting, temperature, and calibration.
Package
Package Type: LGA
Number of Pins: 14
Body Dimensions: 2.5mm x 3.0mm
Nominal Package Height: 0.91mm
Mounting Type: Surface Mount
Package Technology: MEMS sensor package
Manufacturer: TDK InvenSense
The ICM-42688-P is housed in a compact 14-pin land grid array package designed for space-constrained embedded systems.
Its small footprint is useful in wearable devices, motion-tracking modules, robotics platforms, and portable electronic equipment.
Mechanical Design Note: MEMS sensors are sensitive to mechanical stress, vibration, and PCB deformation. Designers should follow TDK's recommended PCB layout and assembly guidelines.
Orientation Note: The package orientation determines the positive X, Y, and Z sensing axes. Refer to the official datasheet before mounting the device.
Pinout
The ICM-42688-P uses a 14-pin LGA package with configurable host communication, power supply, ground, interrupt, synchronization, and reserved connections.
I2C Interface: The AP_SDA and AP_SCL signals require suitable pull-up resistors. AP_CS must be connected as specified for I2C operation.
SPI Interface: AP_CS, AP_SCLK, AP_SDI, and AP_SDO provide four-wire communication. Three-wire operation uses the bidirectional AP_SDIO function.
Power Supply: Separate VDD and VDDIO connections must be correctly decoupled. Follow the manufacturer's recommended application circuit.
Pinout Reference: TDK InvenSense ICM-42688-P datasheet, DS-000347, signal description and application schematic.
Specifications
| Parameter | Value |
|---|---|
| Part Number | ICM-42688-P |
| Manufacturer | TDK InvenSense |
| Product Category | MEMS Motion Sensor |
| Device Type | 6-Axis IMU |
| Gyroscope | 3-Axis |
| Accelerometer | 3-Axis |
| Magnetometer | Not Integrated |
| Gyroscope Full-Scale Range | ±15.625 to ±2000°/s |
| Accelerometer Full-Scale Range | ±2g / ±4g / ±8g / ±16g |
| Gyroscope Noise Density | 2.8 mdps/√Hz Typical |
| Accelerometer Noise Density | 70µg/√Hz Typical |
| VDD Supply | 1.71V to 3.6V |
| VDDIO Supply | 1.71V to 3.6V |
| Host Interfaces | SPI / I2C / I3C |
| Maximum SPI Frequency | 24MHz |
| Maximum I2C Frequency | 1MHz |
| Maximum I3C Frequency | 12.5MHz |
| Embedded Motion Processing | APEX |
| FIFO | Supported |
| External Clock Input | Supported |
| Frame Synchronization | Supported |
| Temperature Sensor | Integrated |
| Low-Noise 6-Axis Current | 0.88mA Typical |
| Operating Temperature | -40°C to +85°C |
| Package | 14-Pin LGA |
| Package Dimensions | 2.5 x 3.0 x 0.91mm |
| Mounting Type | Surface Mount |
| Product Status | Production |
| Datasheet | DS-000347 |
Accuracy Note: Gyroscope and accelerometer measurement accuracy depends on offset calibration, scale-factor error, temperature variation, filtering, and mechanical installation.
Power Note: Current consumption varies according to sensor operating mode, enabled axes, output data rate, and low-power configuration.
Interface Note: Interface speed limits represent maximum supported capabilities under specified operating conditions.
Equivalent
When searching for an ICM-42688-P equivalent, replacement, or alternative, engineers should compare sensor noise density, gyroscope range, accelerometer range, supply voltage, package dimensions, pin configuration, communication interface, and software register compatibility.
ICM-42688-V: A related TDK InvenSense motion-sensing product that may be considered for selected applications. Exact electrical characteristics, package compatibility, and interface requirements must be verified.
ICM-42605: Another TDK InvenSense six-axis IMU suitable for comparative evaluation. Sensor performance, register configuration, and package requirements may differ.
ICM-42670-P: A six-axis IMU from the TDK InvenSense portfolio that may be evaluated for applications with different performance and power requirements.
BMI270: A Bosch Sensortec six-axis IMU that may serve as a functional alternative in selected motion-sensing applications. Firmware and hardware redesign may be required.
LSM6DSOX: An STMicroelectronics six-axis IMU that may be considered for applications requiring integrated motion sensing and digital interfaces.
Replacement Recommendation: For an existing PCB, prioritize the exact ICM-42688-P or a manufacturer-approved substitute.
Before selecting an alternative, compare pin assignments, package footprint, sensor axes, communication protocols, register maps, calibration requirements, and interrupt behavior.
Important: The alternative models listed above are comparison candidates only. None is confirmed as a direct pin-to-pin replacement.
Manufacturer
TDK InvenSense develops MEMS motion sensors, inertial measurement units, microphones, and sensing technologies for consumer, industrial, and embedded applications.
Its MotionTracking portfolio includes integrated accelerometer and gyroscope devices for motion analysis, orientation tracking, robotics, wearable systems, and advanced electronic equipment.
The ICM-42688-P is positioned as a high-precision six-axis IMU with low-noise motion sensing, flexible digital communication, and embedded motion-processing functions.
Official Manufacturer: TDK InvenSense
Official Product Page: ICM-42688-P Product Information
Official Datasheet: ICM-42688-P Datasheet PDF
Documentation Note: The official product page provides current datasheet revisions, application notes, and software resources. Always verify the latest available revision before final design approval.
Applications
Robotics
Angular-rate and acceleration measurement for robot motion estimation, balance control, and movement tracking.
AR / VR / XR Systems
Low-noise inertial sensing for head-motion tracking and immersive interactive devices.
Wearable Electronics
Motion monitoring, activity recognition, step counting, and orientation-related features.
High-Performance IoT
Motion-triggered events and sensor data collection in connected embedded systems.
Motion Tracking Modules
Six-axis inertial measurements for custom tracking devices and sensor-fusion platforms.
Industrial Monitoring
Movement and orientation sensing in industrial electronics and equipment monitoring systems.
Disclaimer
This technical guide is provided for product identification, engineering reference, and electronic component sourcing purposes. Specifications are based on TDK InvenSense product information and the ICM-42688-P datasheet. Electrical limits, sensor performance, package dimensions, pin assignments, interface requirements, calibration procedures, and operating conditions must be verified against the latest manufacturer documentation before design or procurement.
Alternative IMU devices are provided for engineering comparison only and are not automatically interchangeable. Sensor performance, software compatibility, product availability, pricing, and delivery schedules may change without notice.

