Home > The Posts > Product Guides > INA240A1QDRQ1 Current Sense Amplifier – Datasheet, Specifications, Pinout & Applications
INA240A1QDRQ1 - Texas Instruments

INA240A1QDRQ1 Current Sense Amplifier – Datasheet, Specifications, Pinout & Applications

Product Technical Guide INA240A1QDRQ1 20 V/V Automotive Current Sense Amplifier Guide A technical overview of the INA240A1QDRQ1 from Texas Instruments, covering enhanced PWM rejection, bidirectional cu…

In Stock 4,922 Available Inventory
Part No.:
INA240A1QDRQ1
Manufacturer:
Texas Instruments
Package:
8-SOIC (0.154", 3.90mm Width)
Datasheet:
INA240A1QDRQ1.pdf
Description:
IC CURRENT SENSE 1 CIRCUIT 8SOIC
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

INA240A1QDRQ1 Current Sense Amplifier – Datasheet, Specifications, Pinout & Applications

Product Technical Guide
INA240A1QDRQ1 20 V/V Automotive Current Sense Amplifier Guide

A technical overview of the INA240A1QDRQ1 from Texas Instruments, covering enhanced PWM rejection, bidirectional current sensing, SOIC-8 package, pinout, electrical specifications, equivalent options, and typical applications.

Part Number INA240A1QDRQ1
Manufacturer Texas Instruments
Device Type Current Sense Amplifier
01

Product Introduction

INA240A1QDRQ1 is an automotive-qualified, bidirectional current sense amplifier manufactured by Texas Instruments. It belongs to the INA240-Q1 family and features enhanced pulse-width modulation (PWM) rejection, a fixed voltage gain of 20 V/V, and a wide input common-mode voltage range from -4V to +80V.

The device is designed to measure the voltage drop across a current-sensing shunt resistor, providing an amplified analog output that can be processed by an ADC, microcontroller, or other monitoring circuit.

Its enhanced PWM rejection architecture helps suppress large common-mode switching transients, making the INA240A1QDRQ1 particularly suitable for motor drives, solenoid control, automotive power electronics, and other applications involving high-speed switching.

The amplifier operates from a single 2.7V to 5.5V supply and is supplied in an 8-pin SOIC package. It is specified for an ambient operating temperature range of -40°C to +125°C.

With its precision current measurement capability and automotive qualification, INA240A1QDRQ1 is a practical solution for both high-side and low-side shunt current sensing in suitable electronic systems.

02

Key Benefits

Enhanced PWM Rejection

Suppresses large common-mode switching transients to improve current measurement performance in PWM-controlled systems.

Bidirectional Current Sensing

Supports positive and negative current measurements using an appropriate reference voltage and output configuration.

Precision Measurement

Low input offset voltage and controlled gain error support accurate shunt-based current measurements.

Automotive Qualification

AEC-Q100 qualification and a -40°C to +125°C operating range support automotive and demanding industrial designs.

03

Features

  • Automotive-qualified current sense amplifier
  • AEC-Q100 qualified for automotive applications
  • Single-channel analog voltage output
  • Fixed voltage gain of 20 V/V
  • Enhanced PWM rejection for switching applications
  • Bidirectional current measurement capability
  • High-side and low-side current sensing support
  • Wide input common-mode voltage range from -4V to +80V
  • Single supply voltage range from 2.7V to 5.5V
  • Maximum input offset voltage of ±25µV
  • Maximum gain error of 0.20%
  • Maximum gain drift of 2.5ppm/°C
  • 132dB typical DC common-mode rejection ratio
  • 93dB typical AC CMRR at 50kHz
  • Zero-drift amplifier architecture
  • Suitable for precision shunt resistor measurements
  • Reference input for output level adjustment
  • 8-pin SOIC surface-mount package
  • Operating temperature range from -40°C to +125°C
  • RoHS-compliant ordering option
04

Package

Package: SOIC-8

TI Package Designator: D

Package Type: Small Outline Integrated Circuit

Pin Count: 8

Nominal Body Width: 3.9mm

Nominal Body Length: 4.9mm

Pin Pitch: 1.27mm

Mounting: Surface Mount

Operating Temperature: -40°C to +125°C

Packaging: Tape and Reel

Standard Reel Quantity: 2,500 pieces

INA240A1QDRQ1 is supplied in an 8-pin SOIC package designed for surface-mount assembly. The package provides connections for differential current sensing, power supply, output voltage, and reference voltage configuration.

The D package offers a familiar footprint for analog signal-conditioning applications. The complete package dimensions, lead tolerances, land pattern, and soldering recommendations should be verified using the latest Texas Instruments package documentation.

05

Pinout

INA240A1QDRQ1 features an 8-pin SOIC configuration with differential current-sense inputs, reference inputs, a power supply connection, and an analog output.

IN+ Positive differential current-sense input
IN- Negative differential current-sense input
VS Positive amplifier power supply
GND Ground connection
OUT Analog voltage output proportional to the sensed differential voltage
REF1 Reference input used to establish the output reference level
REF2 Second reference input used with REF1 for output reference configuration
NC No-connect pin; follow the manufacturer's pin handling recommendations

The reference inputs allow the output voltage to be shifted for unidirectional or bidirectional current measurement. For bidirectional sensing, a suitable reference level enables the output to represent current flowing in either direction.

The amplified output is related to the voltage across the shunt resistor and the device's fixed gain. Output swing limits, reference accuracy, and the measurement system's ADC input range must be considered.

Design Note: The functional descriptions above do not replace the physical pin-number diagram. Verify exact pin numbering and the manufacturer's connection recommendations against the official INA240-Q1 SOIC-8 datasheet before PCB layout.

06

Specifications

Parameter Value
Part Number INA240A1QDRQ1
Manufacturer Texas Instruments
Product Category Current Sense Amplifier
Product Family INA240-Q1
Qualification AEC-Q100 Automotive
Temperature Grade Grade 1
Number of Channels 1
Output Type Analog Voltage
Fixed Voltage Gain 20 V/V
Supply Voltage 2.7V to 5.5V
Input Common-Mode Voltage -4V to +80V
Maximum Input Offset Voltage ±25µV
Maximum Gain Error 0.20%
Maximum Gain Drift 2.5ppm/°C
Typical DC CMRR 132dB
Typical AC CMRR at 50kHz 93dB
Bandwidth 400kHz, family-level specification; verify test conditions
PWM Rejection Enhanced
Current Measurement Bidirectional / Unidirectional
Current-Sensing Configuration High-Side / Low-Side
Operating Temperature -40°C to +125°C
Package SOIC-8
Package Code D
Pin Count 8
Mounting Type Surface Mount
Packaging Tape and Reel
Standard Reel Quantity 2,500
RoHS Compliant
Moisture Sensitivity Level MSL 2

Specification Note: Typical and maximum parameters are measured under different conditions. Consult the latest Texas Instruments datasheet for the complete electrical characteristics, reference input requirements, output voltage limits, and measurement conditions.

07

Equivalent

When evaluating an INA240A1QDRQ1 equivalent or replacement, engineers should compare fixed gain, common-mode voltage range, PWM rejection performance, input offset voltage, supply voltage, operating temperature, package, and reference input configuration.

INA240A1QDRQ1.A is identified by Texas Instruments as an identical ordering part number variant. Procurement requirements and orderable quantity rules should be verified with the manufacturer.

INA240A1EDRQ1 is a related 20 V/V INA240-Q1 device in an SOIC-8 package with a wider specified temperature range of -40°C to +150°C. It may be evaluated for applications requiring a higher temperature grade, but the exact device specifications and qualification requirements must be checked before substitution.

INA240A2QDRQ1, INA240A3QDRQ1, and INA240A4QDRQ1 belong to the same amplifier family but provide different fixed gains of 50 V/V, 100 V/V, and 200 V/V respectively. These devices are not direct functional equivalents when the original circuit requires a gain of 20 V/V.

Other precision current-sense amplifiers, including suitable devices from the INA241 family, may be considered during a circuit redesign. However, their gain, pinout, electrical limits, PWM rejection, and output characteristics must be evaluated independently.

Replacement Recommendation: Do not assume that current-sense amplifiers with similar common-mode ratings or package types are pin-to-pin compatible. Verify the official datasheets and validate the circuit before approving any alternative.

08

Manufacturer

Texas Instruments (TI) is the manufacturer of INA240A1QDRQ1. TI develops analog and embedded processing semiconductor products used in automotive, industrial, communication, and electronic control applications.

The INA240-Q1 family is designed for precision current measurement in systems where PWM switching can introduce large common-mode voltage transients.

Texas Instruments provides official datasheets, application notes, reference designs, package information, and technical documentation to support component selection and circuit development.

Official Product Information: INA240A1QDRQ1 – Texas Instruments

Official Datasheet: INA240-Q1 Datasheet (PDF)

09

Applications

Automotive Motor Control

Enhanced PWM rejection supports accurate shunt current measurements in automotive motor-drive and actuator-control systems.

Industrial Motor Drives

Bidirectional current sensing helps monitor motor phase currents and other current paths in PWM-controlled motor systems.

Power Electronics

Precision shunt measurement supports current monitoring in suitable DC power conversion and switching power applications.

Battery Current Monitoring

Bidirectional measurement capability supports charge and discharge current monitoring when the system voltage and sensing requirements are within the device limits.

Solenoid Control Systems

The negative common-mode voltage capability and enhanced PWM rejection help support current measurement in inductive load-control applications.

Precision Current Measurement

Low offset voltage and fixed gain enable current-sensing circuits in automotive electronics, embedded controllers, and measurement equipment.

10

Disclaimer

The information provided on this page is intended for product identification and technical reference purposes only. Electrical characteristics, pin assignments, package dimensions, temperature ratings, qualification information, and application requirements should be verified against the latest Texas Instruments datasheet before circuit design, production procurement, or component replacement. Product availability, pricing, and packaging options may change without notice.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```