Home > The Posts > Product Guides > LAN8720A-CP-TR – 10/100 Ethernet PHY Transceiver | Datasheet, Pinout & Applications
LAN8720A-CP-TR - Microchip Technology

LAN8720A-CP-TR – 10/100 Ethernet PHY Transceiver | Datasheet, Pinout & Applications

ETHERNET INTERFACE IC · TECHNICAL GUIDE LAN8720A-CP-TR – 10/100Mbps Ethernet PHY Transceiver with RMII InterfaceComplete technical guide to the Microchip LAN8720A-CP-TR, covering Ethernet PHY functio…

In Stock 4,970 Available Inventory
Part No.:
LAN8720A-CP-TR
Manufacturer:
Microchip Technology
Package:
24-VFQFN Exposed Pad
Datasheet:
LAN8720A-CP-TR.pdf
Description:
IC TRANSCEIVER FULL 2/2 24QFN
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

LAN8720A-CP-TR – 10/100 Ethernet PHY Transceiver | Datasheet, Pinout & Applications

ETHERNET INTERFACE IC · TECHNICAL GUIDE

LAN8720A-CP-TR – 10/100Mbps Ethernet PHY Transceiver with RMII Interface

Complete technical guide to the Microchip LAN8720A-CP-TR, covering Ethernet PHY functionality, key benefits, features, 24-QFN package, pinout, electrical specifications, equivalent options, manufacturer information, and embedded networking applications.

Microchip Technology 10/100Mbps Ethernet PHY RMII · 24-QFN

01. Product Introduction

The LAN8720A-CP-TR is a compact 10/100Mbps Ethernet physical-layer transceiver manufactured by Microchip Technology. Designed for embedded Ethernet connectivity, it provides the physical-layer interface between an Ethernet Media Access Controller (MAC) and a twisted-pair Ethernet network.

The device supports 10BASE-T and 100BASE-TX Ethernet standards and communicates with a compatible Ethernet MAC through a Reduced Media Independent Interface (RMII).

By using RMII instead of a wider traditional MII connection, the LAN8720A-CP-TR helps reduce the number of required interface signals, making it particularly suitable for microcontrollers and embedded processors with limited I/O resources.

The transceiver integrates HP Auto-MDIX technology, automatic speed negotiation, polarity correction, power management features, and an internal 1.2V regulator.

Its compact 4mm × 4mm 24-pin QFN package makes it suitable for industrial controllers, networked instrumentation, embedded communication modules, and connected electronic equipment.

Important: The LAN8720A-CP-TR is an Ethernet PHY, not a standalone Ethernet controller. It requires a compatible Ethernet MAC and appropriate external magnetics and connector circuitry.

02. Key Benefits

  • Fast Ethernet Connectivity: Supports both 10Mbps and 100Mbps Ethernet communication.
  • Reduced Pin Count: The RMII interface simplifies connections to compatible microcontrollers and processors.
  • Compact Package: A 4mm × 4mm QFN footprint supports space-constrained PCB designs.
  • Automatic Cable Detection: HP Auto-MDIX automatically handles straight-through and crossover cable configurations.
  • Flexible Power Management: Integrated flexPWR technology supports multiple low-power operating modes.
  • Simple Power Architecture: An internal 1.2V regulator enables operation from a suitable single 3.3V supply.
  • Network Compatibility: Supports IEEE 802.3 Ethernet requirements for 10BASE-T and 100BASE-TX operation.
  • Embedded Integration: Management and status functions simplify PHY configuration and network diagnostics.

03. Features

  • Single-port 10/100Mbps Ethernet physical-layer transceiver.
  • IEEE 802.3 and IEEE 802.3u compliant Ethernet functionality.
  • 10BASE-T and 100BASE-TX support.
  • Reduced Media Independent Interface (RMII).
  • 10Mbps and 100Mbps half-duplex and full-duplex operation.
  • Automatic speed and duplex negotiation.
  • HP Auto-MDIX cable detection and correction.
  • Automatic polarity detection and correction.
  • Integrated 1.2V voltage regulator.
  • Configurable LVCMOS I/O supply from 1.6V to 3.6V.
  • Single 3.3V supply operation with the internal regulator enabled.
  • Integrated flexPWR power management technology.
  • Power-down and energy-saving operating modes.
  • Link-status-change wake-up detection.
  • Integrated power-on reset functionality.
  • Serial Management Interface using MDC and MDIO.
  • Programmable PHY operating modes.
  • Loopback modes for testing and diagnostics.
  • Two programmable LED status outputs.
  • Support for a 25MHz crystal clock source.
  • Compact 24-pin QFN package.

04. Package

The LAN8720A-CP-TR is supplied in a 24-pin QFN package with an exposed thermal pad, designed for surface-mount assembly.

Parameter Description
Part Number LAN8720A-CP-TR
Manufacturer Microchip Technology
Package Type QFN-24
Package Dimensions 4.0 × 4.0mm
Package Height 0.85mm nominal
Pin Count 24 plus exposed pad
Mounting Type Surface Mount
Packaging Tape and Reel
Temperature Grade Extended Commercial
Operating Temperature 0°C to +85°C

The "-CP" suffix identifies the extended commercial temperature version, while "-TR" identifies the tape-and-reel ordering option.

The exposed pad must be connected according to Microchip's recommended grounding and PCB layout instructions. Proper placement of decoupling capacitors and Ethernet magnetics is important for signal integrity and electromagnetic compatibility.

05. Pinout

The LAN8720A-CP-TR provides RMII communication signals, Ethernet differential connections, management signals, clock connections, power pins, and configuration functions.

Signal Function Description
TXD0 / TXD1 RMII Transmit Data Two-bit data bus from Ethernet MAC to PHY.
TXEN Transmit Enable Indicates valid transmit data.
RXD0 / RXD1 RMII Receive Data Two-bit received data bus from PHY to MAC.
CRS_DV Carrier Sense / Data Valid Indicates carrier activity and valid received data.
RXER Receive Error Indicates errors detected during reception.
MDC Management Clock Clock input for the PHY management interface.
MDIO Management Data Bidirectional management data connection.
TXP / TXN Transmit Pair Differential Ethernet transmit signals.
RXP / RXN Receive Pair Differential Ethernet receive signals.
XTAL1 / CLKIN Clock Input Crystal oscillator or external clock connection.
XTAL2 Crystal Connection Second crystal oscillator terminal.
nRST Reset Active-low hardware reset input.
LED1 / LED2 Status Indicators Programmable Ethernet status LED functions.
VDDIO I/O Supply Supply for the digital interface circuitry.
VDD1A / VDD2A Analog Supplies Analog power connections.
VDDCR Core Supply Internal core regulator supply node.
VSS Ground Ground reference and exposed pad connection.

Pin Multiplexing: Several signals also serve as configuration straps, clock outputs, or interrupt functions. Their operation depends on the selected hardware configuration.

Important: This table summarizes signal functions rather than physical pin numbers. Designers must use the official Microchip 24-QFN pin assignment drawing for exact pin numbering and multiplexed signal details.

06. Specifications

The following table summarizes the major technical specifications of the LAN8720A-CP-TR Ethernet PHY transceiver.

Parameter Value
Part Number LAN8720A-CP-TR
Manufacturer Microchip Technology
Product Category Ethernet PHY Transceiver
Number of Ethernet Ports 1
Ethernet Standards 10BASE-T / 100BASE-TX
Data Rates 10Mbps / 100Mbps
Duplex Modes Half / Full Duplex
MAC Interface RMII
Management Interface SMI (MDC / MDIO)
I/O Supply Voltage 1.6V to 3.6V
Typical Main Supply 3.3V
Internal Core Regulator 1.2V
RMII Reference Clock 50MHz
Crystal Frequency 25MHz
Auto-Negotiation Supported
HP Auto-MDIX Supported
Power Management flexPWR Technology
LED Outputs 2
Operating Temperature 0°C to +85°C
Package 24-QFN
Package Size 4mm × 4mm
Mounting Type Surface Mount

Power Supply Consideration: The 1.6V to 3.6V rating applies to the configurable I/O supply and must not be interpreted as a universal operating range for every supply pin. The analog and core power connections must follow the datasheet requirements.

Clock Consideration: The RMII interface requires a 50MHz reference clock. Depending on the selected clock architecture, the device may use an external 50MHz source or a supported 25MHz crystal configuration.

Official Datasheet: LAN8720A / LAN8720Ai Datasheet – Microchip Technology

07. Equivalent

When selecting a LAN8720A-CP-TR equivalent or alternative Ethernet PHY, engineers should evaluate the MAC interface, operating voltage, clock configuration, PHY address, package dimensions, and external circuitry.

Part Number Relationship Replacement Considerations
LAN8720A-CP Same commercial-temperature device. Standard packaging option; verify ordering and assembly requirements.
LAN8720Ai-CP-TR Industrial-temperature version of the LAN8720A family. Supports -40°C to +85°C; verify package and ordering requirements.
LAN8720A-CP-TR-ABC Related LAN8720A package variant. Uses a sawn QFN package; check footprint and assembly compatibility.
LAN8742A Related Microchip 10/100 Ethernet PHY. Potential redesign alternative; verify pinout, clocking, interface configuration, and PCB compatibility.
DP83848 10/100 Ethernet PHY family from Texas Instruments. Functional alternative for a redesign; package and interface implementation may differ.

Replacement Recommendation: The LAN8720A-CP and LAN8720Ai-CP-TR are the closest family alternatives. Other Ethernet PHY devices should be evaluated as redesign candidates rather than assumed direct replacements.

When changing Ethernet PHY components, verify the RMII clock source, PHY address, strap resistors, management registers, power sequencing, magnetics, and PCB routing.

08. Manufacturer

Microchip Technology is a global semiconductor manufacturer offering microcontrollers, embedded processors, analog components, memory products, and communication interface solutions.

The LAN8720A belongs to Microchip's Ethernet connectivity portfolio and incorporates technology originally developed by SMSC.

Microchip provides technical documentation, reference designs, application notes, and development resources to support Ethernet PHY integration into embedded electronic systems.

The LAN8720A-CP-TR is listed as an active component by major electronic component distributors. Designers should confirm the latest manufacturer lifecycle information before beginning a long-term production project.

Manufacturer Website: Microchip Technology

09. Applications

The LAN8720A-CP-TR is suitable for embedded systems that require reliable wired Ethernet communication and a compact physical-layer interface.

  • Industrial Ethernet Controllers: Provides physical Ethernet connectivity for compatible industrial control processors.
  • Embedded Microcontroller Systems: Connects microcontrollers with integrated Ethernet MAC peripherals to 10/100Mbps networks.
  • Networked Printers: Supports wired communication between printing equipment and local networks.
  • Test and Measurement Equipment: Enables network connectivity for instrumentation and remote monitoring systems.
  • Routers and Network Equipment: Provides a physical-layer interface in suitable networking architectures.
  • IP and Video Communication: Supports Ethernet connectivity in video equipment and communication terminals.
  • Embedded Telecom Equipment: Enables physical Ethernet communication for network-enabled electronic subsystems.
  • Smart Home Devices: Supports wired connectivity in suitable gateways, controllers, and monitoring products.
  • Wireless Access Points: Provides an Ethernet PHY interface for compatible access point processors.
  • Digital Media Systems: Enables wired network connections in multimedia and streaming equipment.

Typical Application Example: An embedded processor with an integrated Ethernet MAC can connect to the LAN8720A-CP-TR through RMII. The PHY then connects through the appropriate Ethernet magnetics to an RJ45 connector, enabling 10BASE-T or 100BASE-TX network communication.

For an STM32-based Ethernet design, engineers must verify that the selected STM32 microcontroller includes a compatible Ethernet MAC. The LAN8720A-CP-TR alone cannot provide a complete Ethernet interface to a microcontroller without MAC functionality.

Design Consideration: Differential-pair routing, clock integrity, power decoupling, magnetics selection, and electromagnetic compatibility must be considered when designing a reliable Ethernet interface.

10. Disclaimer

This LAN8720A-CP-TR technical guide is intended for general product information, electronic component selection, and engineering reference purposes.

Electrical specifications, package dimensions, signal functions, and operating conditions should be verified against the latest official Microchip datasheet before integrating the device into a commercial or industrial electronic design.

Alternative components listed in this guide are provided for preliminary engineering evaluation only. Similar Ethernet functionality does not guarantee pin-to-pin, electrical, mechanical, or software compatibility.

Product pricing, inventory availability, ordering configurations, and lifecycle information may change without notice.

All product names, manufacturer names, and trademarks remain the property of their respective owners.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```