Home > The Posts > Product Guides > LM4871MX Datasheet, Pinout, Specifications & Applications | TI Audio Amplifier
LM4871MX - Texas Instruments

LM4871MX Datasheet, Pinout, Specifications & Applications | TI Audio Amplifier

Electronic Component Technical GuideLM4871MX – Mono Class-AB Audio Power AmplifierThe LM4871MX is a low-voltage mono audio power amplifier from Texas Instruments. Designed for portable and compact aud…

In Stock 3,509 Available Inventory
Part No.:
LM4871MX
Manufacturer:
Texas Instruments
Package:
8-SOIC (0.154", 3.90mm Width)
Datasheet:
LM4871MX.pdf
Description:
IC AMP CLASS AB MONO 3W 8SOIC
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

LM4871MX Datasheet, Pinout, Specifications & Applications | TI Audio Amplifier

Electronic Component Technical Guide

LM4871MX – Mono Class-AB Audio Power Amplifier

The LM4871MX is a low-voltage mono audio power amplifier from Texas Instruments. Designed for portable and compact audio systems, it features a bridged output architecture, micropower shutdown mode, thermal shutdown protection and external gain configuration. Operating from a 2.0V to 5.5V supply, it provides a practical audio amplification solution in an 8-pin SOIC package.

Manufacturer: Texas Instruments Type: Class-AB Audio Amplifier Package: SOIC-8

01. Product Introduction

The LM4871MX is a mono bridge-tied load (BTL) Class-AB audio power amplifier manufactured by Texas Instruments. It belongs to the LM4871 Boomer audio amplifier family and is designed for low-voltage audio applications requiring compact circuit implementation and efficient speaker driving.

Operating with a supply voltage between 2.0V and 5.5V, the LM4871MX is suitable for portable electronic equipment and low-voltage audio systems. Its BTL output architecture drives a speaker between two amplifier outputs, eliminating the need for a conventional output coupling capacitor.

For the SOIC-8 LM4871MX package, the device typically delivers 1.5W into an 8Ω load at 10% THD+N with a 5V supply and a 1kHz input signal. This output rating should be distinguished from the 3W capability specified for the LM4871LD WSON package under a different 3Ω load condition.

Another important characteristic is its micropower shutdown mode. The shutdown current is typically 0.6µA, helping reduce power consumption when audio playback is not required.

The LM4871MX also integrates thermal shutdown protection and supports external gain configuration. Its relatively small component count makes it useful in space-constrained audio designs.

Product Overview:

  • Part Number: LM4871MX
  • Manufacturer: Texas Instruments
  • Product Family: LM4871 Boomer Series
  • Device Type: Audio Power Amplifier
  • Amplifier Class: Class AB
  • Output Configuration: Mono BTL
  • Supply Voltage: 2.0V to 5.5V
  • Typical Output Power: 1.5W into 8Ω at 10% THD+N
  • Shutdown Current: 0.6µA Typical
  • Package: SOIC-8
  • Operating Temperature: -40°C to +85°C

02. Key Benefits

Low-Voltage Operation

The LM4871MX supports a 2.0V to 5.5V supply voltage range, making it suitable for battery-powered equipment and compact electronic products operating from low-voltage power sources.

Bridge-Tied Load Architecture

The BTL output configuration drives the speaker using two amplifier outputs. This architecture eliminates the need for a large output coupling capacitor commonly required in single-ended audio amplifier designs.

Low Shutdown Current

The integrated shutdown function provides a typical current consumption of only 0.6µA in shutdown mode, helping reduce standby power consumption in portable products.

External Gain Configuration

Designers can configure the closed-loop voltage gain using external input and feedback resistors. This provides flexibility when matching the amplifier to different audio input signal levels.

Thermal Shutdown Protection

The integrated thermal protection helps protect the device when excessive internal temperature occurs. Proper thermal design remains necessary for reliable operation.

Compact SOIC-8 Packaging

The eight-pin SOIC package supports surface-mount assembly and helps reduce PCB space in compact audio electronic products.

Reduced External Component Requirements

The LM4871MX does not require output coupling capacitors, bootstrap capacitors or snubber circuits in its typical application configuration.

03. Features

  • Mono Class-AB audio power amplifier.
  • Bridge-tied load (BTL) output architecture.
  • 2.0V to 5.5V operating supply voltage.
  • 1.5W typical output power into 8Ω at 10% THD+N for the SOIC package under specified conditions.
  • Micropower shutdown mode.
  • 0.6µA typical shutdown current.
  • External gain configuration capability.
  • Unity-gain stable architecture.
  • Integrated thermal shutdown protection.
  • No output coupling capacitors required.
  • No bootstrap capacitors required.
  • No snubber circuits required.
  • Eight-pin SOIC surface-mount package.
  • Operating temperature range from -40°C to +85°C.

Class-AB Amplification

The LM4871MX uses a Class-AB amplifier architecture to amplify analog audio signals and drive a connected speaker. This architecture provides a balance between output performance and power consumption for low-voltage audio systems.

Bridge-Tied Load Output

The two output terminals operate with opposing signal phases, allowing the speaker to be connected directly between the amplifier outputs. This configuration helps increase the available voltage swing across the speaker without requiring a large output capacitor.

Shutdown Control

The dedicated SHUTDOWN pin allows the system controller to place the amplifier into a low-current state when audio output is not needed.

Adjustable Closed-Loop Gain

The external input and feedback resistor network determines the amplifier gain. This allows the LM4871MX to accommodate different audio input signal levels and system requirements.

04. Package

The LM4871MX is supplied in an 8-pin Small Outline Integrated Circuit (SOIC-8) package designed for surface-mount PCB assembly.

Package Attribute Description
Package Type SOIC
Package Drawing D
Pin Count 8
Package Width Approximately 3.9mm
Mounting Type Surface Mount
Body Style Small Outline
Ordering Code LM4871MX/NOPB
Standard Reel Quantity 2,500 Pieces
Operating Temperature -40°C to +85°C

The SOIC-8 package provides a compact footprint for audio amplifier circuits used in portable electronics and embedded audio products.

During PCB design, engineers should follow the recommended land pattern, soldering profile and thermal layout requirements specified by Texas Instruments.

The amplifier's power dissipation and junction temperature should be evaluated under the intended supply voltage, speaker load and ambient operating conditions.

Official Package Reference:

Download LM4871 Official Datasheet

05. Pinout

The LM4871MX uses an eight-pin SOIC package. Its pin configuration provides audio input, output, power, ground, bypass and shutdown connections.

LM4871MX Pin Configuration – Top View:

             LM4871MX
          SOIC-8 Top View

       SHUTDOWN  1  8  VO2
          BYPASS 2  7  GND
            +IN 3  6  VDD
            -IN 4  5  VO1

  
Pin Pin Name Function
1 SHUTDOWN Shutdown control input
2 BYPASS Internal half-supply bias bypass connection
3 +IN Non-inverting audio input
4 -IN Inverting audio input
5 VO1 Audio amplifier output 1
6 VDD Positive power supply
7 GND Ground connection
8 VO2 Audio amplifier output 2

Important Pin Functions:

SHUTDOWN (Pin 1): Controls the low-power shutdown function. Applying the appropriate high-level control signal activates shutdown mode.

BYPASS (Pin 2): Provides access to the internal half-supply bias reference. A bypass capacitor is connected to this pin to improve power-supply and audio performance.

+IN (Pin 3): Non-inverting audio input terminal.

-IN (Pin 4): Inverting audio input terminal. External input and feedback resistors can be used to configure the closed-loop gain.

VO1 and VO2 (Pins 5 and 8): The two amplifier output terminals. The speaker is connected between these outputs in a BTL configuration.

VDD (Pin 6): Positive power supply connection supporting the specified 2.0V to 5.5V operating range.

GND (Pin 7): Ground reference for the amplifier circuit.

PCB Design Considerations:

  • Place the supply bypass capacitor close to the VDD and GND connections.
  • Use the recommended capacitor on the BYPASS pin.
  • Keep audio input traces away from noisy output and power traces.
  • Connect the speaker between VO1 and VO2 rather than directly from one output to ground.
  • Follow the manufacturer's recommended shutdown control circuit.
  • Verify the speaker impedance and power rating before operation.

Official Pinout Reference:

LM4871 SOIC-8 Pinout and Application Circuit

06. Specifications

The following table summarizes the main electrical characteristics of the LM4871MX. Output power figures are package- and load-dependent and should not be confused with the specifications of the WSON version.

Parameter Specification
Manufacturer Texas Instruments
Part Number LM4871MX
Device Category Audio Amplifier IC
Amplifier Class Class AB
Output Configuration Mono BTL
Number of Channels 1
Supply Voltage Range 2.0V to 5.5V
Typical Output Power 1.5W at 8Ω, 10% THD+N
Output Power at 1% THD+N 1.2W at 8Ω
Test Frequency 1kHz
Shutdown Current 0.6µA Typical
Shutdown Current Limit 2µA
Quiescent Supply Current 6.5mA Typical
Quiescent Supply Current Limit 10mA
THD+N 0.25% Typical at 1W, 8Ω, 5V
Power Supply Rejection Ratio 60dB Typical
Protection Thermal Shutdown
Gain Configuration External Gain Setting
Package SOIC-8
Operating Temperature -40°C to +85°C
Mounting Type Surface Mount

Audio Output Performance

The LM4871MX provides typical output power of 1.5W into an 8Ω load at 10% THD+N when operated from a 5V supply at 1kHz. At 1% THD+N under the specified test conditions, the typical output power is 1.2W.

Supply Voltage

The 2.0V to 5.5V operating supply range allows the amplifier to be integrated into various low-voltage electronic systems.

Shutdown Performance

The typical shutdown current of 0.6µA makes the device useful in battery-powered applications where minimizing standby consumption is important.

Audio Distortion

The datasheet specifies typical THD+N of 0.25% at 1W continuous average output power into an 8Ω load under the stated test conditions.

Thermal Protection

Integrated thermal shutdown protection helps prevent damage caused by excessive internal temperature. PCB thermal performance and load conditions must still be considered during circuit design.

Official Datasheet:

Texas Instruments LM4871 Datasheet PDF

07. Equivalent

When searching for an LM4871MX equivalent or replacement, engineers should evaluate output power, supply voltage, amplifier architecture, speaker impedance, shutdown control, package dimensions and pin compatibility.

The LM4871 family is available in several package and ordering configurations. These versions share the basic amplifier architecture but may have different package-specific output power capabilities.

Part Number Package Relationship
LM4871MX/NOPB SOIC-8 Original RoHS-compliant SOIC ordering option
LM4871M/NOPB SOIC-8 Related SOIC ordering option
LM4871MM/NOPB VSSOP-8 Same amplifier family in a different package
LM4871LD/NOPB WSON-8 Different package with higher specified output capability under its rated load conditions
LM4871MMX/NOPB VSSOP-8 Tape-and-reel ordering option
LM4861 Package dependent Pin-compatible related amplifier identified by TI

LM4871MX vs LM4871LD

The LM4871MX uses an SOIC-8 package and is specified for 1.5W typical output into an 8Ω load at 10% THD+N.

The LM4871LD uses a WSON package and has different thermal and output power characteristics. It can deliver 3W into a 3Ω load at 10% THD+N when properly mounted to a circuit board.

These devices should not be treated as direct mechanical replacements because their package configurations differ.

LM4871MX vs LM4861

Texas Instruments identifies the LM4861 as a pin-compatible device. However, pin compatibility does not automatically guarantee identical electrical performance or suitability in every application.

Replacement Selection Checklist:

  • Verify the supply voltage range.
  • Compare rated output power and speaker impedance.
  • Check Class-AB architecture and BTL output configuration.
  • Confirm shutdown control behavior.
  • Compare THD+N and audio performance.
  • Verify thermal protection and power dissipation.
  • Check the SOIC-8 footprint and exact pin assignment.
  • Review the complete datasheet before approving a replacement.

Important Replacement Notice:

Related LM4871 ordering variants may differ in package, reel quantity and environmental specifications. Functional similarity does not guarantee pin-to-pin or thermal compatibility. Always verify the exact ordering code and package drawing before production substitution.

08. Manufacturer

The LM4871MX is manufactured by Texas Instruments (TI), a global semiconductor company specializing in analog and embedded processing technologies.

Texas Instruments develops audio amplifiers, power management ICs, microcontrollers, data converters, interface devices and other semiconductor products used in industrial, automotive, communications and consumer electronics.

The LM4871 belongs to the Boomer audio amplifier family, which was developed for low-voltage audio amplification applications requiring compact implementation and reduced external component count.

Manufacturer Information:

  • Manufacturer: Texas Instruments
  • Product: LM4871MX
  • Product Family: Boomer Audio Amplifiers
  • Device Category: Audio Power Amplifier
  • Amplifier Class: Class AB
  • Output: Mono BTL
  • Package: SOIC-8
  • Ordering Code: LM4871MX/NOPB
  • Operating Temperature: -40°C to +85°C
  • Official Website: www.ti.com
  • Product Page: Texas Instruments LM4871
  • Datasheet: LM4871 Datasheet PDF

Engineers and purchasing teams can use the official TI product page to review product documentation, package information, electrical characteristics and ordering details.

For component sourcing, buyers should verify the complete part number, manufacturer marking, packaging, date code and traceability documentation.

09. Applications

The LM4871MX is designed for low-voltage mono audio amplification. Its compact package, BTL output architecture and shutdown functionality make it suitable for several portable and embedded audio applications.

1. Portable Computers

The amplifier can be used in suitable portable computer audio systems to drive small speakers from a low-voltage supply.

2. Desktop Computers

It can support compact speaker amplification circuits and auxiliary audio output stages in desktop electronic equipment.

3. Low-Voltage Audio Systems

The 2.0V to 5.5V supply range makes the LM4871MX suitable for audio equipment operating from low-voltage power supplies.

4. Portable Electronic Devices

The integrated shutdown mode and compact SOIC-8 package support space-constrained portable products where standby power consumption is important.

5. Embedded Audio Equipment

The LM4871MX can be integrated into embedded systems requiring a simple mono audio output stage.

6. Electronic Voice Systems

Suitable voice playback equipment can use the amplifier to drive a speaker for notification sounds, voice prompts and audio feedback.

7. Consumer Electronics

Compact consumer devices with low-voltage speaker output requirements can consider the LM4871MX as an audio amplification component.

8. Battery-Powered Audio Equipment

The micropower shutdown function helps reduce standby current when the amplifier is not actively driving a speaker.

Application Design Recommendations:

  • Verify the speaker impedance and rated power.
  • Use a supply voltage within the 2.0V to 5.5V operating range.
  • Connect the speaker between VO1 and VO2.
  • Configure the external gain resistors according to the required audio signal level.
  • Use suitable input and bypass capacitors.
  • Place supply decoupling capacitors close to the IC.
  • Implement the shutdown pin according to the recommended circuit.
  • Consider thermal performance under continuous audio output.
  • Follow the manufacturer's PCB layout recommendations.
  • Evaluate THD+N and output power under actual operating conditions.

The LM4871MX is most appropriate for applications requiring a compact, low-voltage mono audio amplifier rather than high-power stereo audio amplification.

10. Disclaimer

This LM4871MX technical guide is provided for general electronic component research, engineering reference and product selection purposes.

Technical specifications and functional descriptions are based on publicly available Texas Instruments product information and the official LM4871 datasheet.

Output power depends on package type, supply voltage, speaker impedance, distortion level, PCB thermal performance and operating conditions. The 3W rating specified for the LM4871LD WSON package must not be applied to the LM4871MX SOIC package.

Equivalent and replacement components must be independently evaluated for electrical, mechanical, thermal and functional compatibility.

Product status, ordering information, pricing and inventory availability may change. Buyers should verify the latest information with Texas Instruments or authorized distributors.

Official Technical Reference:

Texas Instruments LM4871 Product Page

Texas Instruments LM4871 Official Datasheet

Editorial Note: This article is an independent technical overview and does not represent an official Texas Instruments publication. All component specifications and replacement recommendations should be verified against the latest manufacturer documentation before engineering or purchasing decisions.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```