LMR14050SDDAR 40V 5A Step-Down Buck Converter | Texas Instruments
PRODUCT TECHNICAL GUIDE LMR14050SDDAR – 40V 5A Step-Down Buck ConverterThe LMR14050SDDAR is a high-performance step-down switching regulator from Texas Instruments. Featuring a 4V to 40V input range, …
- Part No.:
- LMR14050SDDAR
- Manufacturer:
- Texas Instruments
- Package:
- 8-PowerSOIC (0.154", 3.90mm Width)
- Datasheet:
- LMR14050SDDAR.pdf
- Description:
- IC REG BUCK ADJ 5A 8SOPWR
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
LMR14050SDDAR 40V 5A Step-Down Buck Converter | Texas Instruments
LMR14050SDDAR – 40V 5A Step-Down Buck Converter
The LMR14050SDDAR is a high-performance step-down switching regulator from Texas Instruments. Featuring a 4V to 40V input range, 5A continuous output capability and adjustable switching frequency, it is designed for industrial, automotive-related and battery-powered power management applications.
01. Product Introduction
The LMR14050SDDAR is a 40V, 5A step-down DC-DC switching regulator manufactured by Texas Instruments. It belongs to the SIMPLE SWITCHER family and integrates a high-side power MOSFET to simplify power supply design.
The device supports an input voltage range from 4V to 40V and provides an adjustable output voltage from 0.8V to 28V. This wide operating range makes it suitable for converting higher-voltage DC sources into stable lower-voltage power rails.
One of its important characteristics is its low operating quiescent current of 40µA and shutdown current of approximately 1µA. These features help reduce standby power consumption in battery-powered and energy-conscious systems.
With adjustable switching frequency, internal compensation and integrated protection functions, the LMR14050SDDAR offers a practical solution for power management designs requiring high input voltage tolerance and reliable output regulation.
02. Key Benefits
- Wide Input Voltage Range: Supports 4V to 40V input, making it suitable for different DC power supply architectures.
- High Output Current: Provides up to 5A continuous output current for demanding power conversion applications.
- Adjustable Output Voltage: Supports output voltages from 0.8V to 28V through an external feedback network.
- Low Standby Consumption: Features 40µA typical operating quiescent current and 1µA typical shutdown current.
- Flexible Switching Frequency: Adjustable from 200kHz to 2.5MHz, allowing designers to optimize efficiency and external component size.
- Integrated Power MOSFET: Reduces the need for an external high-side switching transistor.
- Built-in Protection: Includes current limiting, thermal shutdown and output overvoltage protection.
- Simplified Design: Internal loop compensation reduces external design complexity.
03. Features
- 4V to 40V input voltage range
- 5A continuous output current
- Adjustable output voltage from 0.8V to 28V
- 200kHz to 2.5MHz adjustable switching frequency
- 40µA typical operating quiescent current
- 1µA typical shutdown current
- Integrated 90mΩ typical high-side MOSFET
- Current-mode control architecture
- External clock synchronization
- Internal loop compensation
- Precision enable input
- External soft-start control
- Cycle-by-cycle current limiting
- Thermal shutdown and output overvoltage protection
- High-duty-cycle operation
04. Package
The LMR14050SDDAR is supplied in an 8-pin HSOIC package with an integrated PowerPAD thermal connection. The package designation is DDA, and its nominal dimensions are 4.9mm × 6mm.
The exposed thermal pad provides an important heat dissipation path from the device to the PCB ground plane. Proper PCB copper layout and thermal design are necessary when operating at higher output currents.
- Package Type: HSOIC-8 with PowerPAD
- Package Designation: DDA
- Number of Pins: 8 + Exposed Thermal Pad
- Package Dimensions: 4.9mm × 6mm
- Mounting Type: Surface Mount
- Packaging: Tape and Reel (TR)
05. Pinout
The LMR14050SDDAR uses an 8-pin HSOIC configuration with a central exposed thermal pad. Each pin performs a specific function in the switching regulator circuit.
- Pin 1 – BOOT: Bootstrap capacitor connection for the high-side MOSFET driver. Connect a suitable capacitor between BOOT and SW.
- Pin 2 – VIN: Input power supply connection.
- Pin 3 – EN: Enable input for device activation and shutdown control.
- Pin 4 – RT/SYNC: Switching frequency programming or external synchronization input.
- Pin 5 – FB: Feedback input used to regulate the output voltage.
- Pin 6 – SS: Soft-start control connection for setting the output voltage startup time.
- Pin 7 – GND: Ground reference connection.
- Pin 8 – SW: Switching node connected to the external power inductor.
- Thermal Pad – Pin 9: Exposed thermal pad, which must be connected to the PCB ground plane.
Pin numbering is based on the official TI DDA HSOIC package top-view diagram. Confirm the PCB footprint and thermal pad requirements using the manufacturer's package drawing before assembly.
06. Specifications
| Parameter | Specification |
|---|---|
| Part Number | LMR14050SDDAR |
| Manufacturer | Texas Instruments |
| Product Type | DC-DC Switching Regulator |
| Topology | Step-Down (Buck) |
| Input Voltage | 4V – 40V |
| Output Voltage | 0.8V – 28V Adjustable |
| Output Current | 5A Continuous |
| Switching Frequency | 200kHz – 2.5MHz |
| Operating Quiescent Current | 40µA Typical |
| Shutdown Current | 1µA Typical |
| High-Side MOSFET Resistance | 90mΩ Typical |
| Control Method | Current Mode |
| Rectification | Asynchronous |
| Soft Start | External |
| Protection | Overcurrent, Thermal and Output Overvoltage |
| Operating Temperature | -40°C to +125°C (Junction) |
| Package | HSOIC-8 with PowerPAD |
| Package Code | DDA |
| Mounting Type | Surface Mount |
| Packaging | Tape and Reel |
| Product Status | Active |
Specifications are based on the LMR14050 datasheet. Actual output performance and thermal capability depend on input voltage, output voltage, switching frequency, PCB layout and external component selection.
07. Equivalent and Alternative Components
When evaluating alternatives to the LMR14050SDDAR, engineers should compare input voltage range, output current, adjustable output range, switching frequency, control architecture and thermal performance.
- LMR14050SDDA: The same LMR14050 device in the DDA HSOIC-8 package. The ordering suffix differs in packaging configuration; verify the specific orderable option.
- LMR14050-Q1: Automotive-qualified related device family option. Confirm the exact suffix, package, electrical specifications and automotive qualification requirements.
- LMR33630: A related Texas Instruments synchronous buck converter family option with different current capability and operating characteristics.
- LM76002: A higher-current-capability buck regulator option that may be considered for designs requiring a different power architecture.
These alternatives are not guaranteed pin-to-pin replacements. The LMR14050 uses an asynchronous buck architecture with an external catch diode, while some alternative devices use synchronous rectification. Engineers should review efficiency, component count, layout, electrical limits and thermal requirements before changing devices.
08. Manufacturer
The LMR14050SDDAR is manufactured by Texas Instruments (TI), a global semiconductor company specializing in analog integrated circuits, embedded processors, power management solutions and semiconductor technologies.
Texas Instruments develops power management products for industrial, automotive, communications and consumer electronics applications. Its SIMPLE SWITCHER product family focuses on simplifying DC-DC power supply design through integrated control functions and power conversion technologies.
The LMR14050 series is designed for systems that need to convert relatively high DC input voltages into regulated lower-voltage power rails while maintaining low standby power consumption.
Official Website: Texas Instruments.
09. Applications
The LMR14050SDDAR is suitable for a range of power conversion applications requiring high input voltage tolerance, adjustable output voltage and continuous current capability up to 5A.
- Industrial Power Supplies: Converts higher-voltage DC sources into regulated power rails for industrial control equipment.
- Automotive Battery Regulation: Supports DC power conversion in automotive-related electronic systems, subject to the application's electrical and transient requirements.
- Telecommunications Equipment: Provides regulated power for communication and networking subsystems.
- Battery-Powered Systems: Low operating and shutdown current helps reduce unnecessary standby power consumption.
- Embedded Systems: Supplies stable DC power to processors, controllers and peripheral circuits.
- Distributed Power Systems: Converts intermediate DC bus voltages into lower-voltage supply rails.
- Consumer Electronics: Supports power management in electronic equipment requiring adjustable DC output.
- General DC-DC Conversion: Suitable for applications requiring a compact and adjustable asynchronous buck regulator.
10. Disclaimer
The information in this article is intended for general technical reference and electronic component selection. All electrical specifications, package details, operating conditions and ordering information should be verified against the latest official Texas Instruments datasheet.
Equivalent and alternative components are provided for preliminary engineering evaluation only. They are not guaranteed to be direct replacements. Always verify pin compatibility, electrical performance, switching architecture, thermal characteristics and PCB layout requirements before implementing a substitution.

