M24512-RMN6TP Datasheet, Pinout, Equivalent & Applications
Memory ICs & EEPROM M24512-RMN6TP 512-Kbit I²C Serial EEPROMThe M24512-RMN6TP is a 512-Kbit non-volatile serial EEPROM manufactured by STMicroelectronics. Featuring a 64K × 8 memory organization, I²…
- Part No.:
- M24512-RMN6TP
- Manufacturer:
- STMicroelectronics
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
- M24512-RMN6TP.pdf
- Description:
- IC EEPROM 512KBIT I2C 1MHZ 8SOIC
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
M24512-RMN6TP Datasheet, Pinout, Equivalent & Applications
M24512-RMN6TP 512-Kbit I²C Serial EEPROM
The M24512-RMN6TP is a 512-Kbit non-volatile serial EEPROM manufactured by STMicroelectronics. Featuring a 64K × 8 memory organization, I²C communication up to 1MHz, a 1.8V to 5.5V supply range, and an 8-pin SO8N package, it provides reliable data storage for embedded and industrial electronic systems.
1. Product Introduction
The M24512-RMN6TP is a 512-Kbit serial EEPROM manufactured by STMicroelectronics. It belongs to the M24512-R family of I²C-compatible non-volatile memory devices and is designed for applications requiring reliable data storage without continuous power.
The device provides a memory capacity of 512 Kbit, equivalent to 64 Kbytes, organized as 65,536 words of 8 bits each (64K × 8). This memory architecture allows electronic systems to store configuration parameters, calibration information, identification data, operating records, and other important system information.
The M24512-RMN6TP communicates through a standard two-wire I²C interface consisting of serial data (SDA) and serial clock (SCL) signals. It supports communication speeds of up to 1MHz, making it suitable for embedded systems that require efficient communication with a host microcontroller.
One of its important characteristics is its wide operating supply voltage range of 1.8V to 5.5V. This allows the device to operate in different digital platforms, including low-voltage microcontroller systems and traditional 5V electronic designs.
The memory supports byte-write and page-write operations, with a page size of 128 bytes. Its internal write cycle can be completed within 5ms under specified conditions. The device also supports random and sequential read operations, providing flexibility for different memory access requirements.
The M24512-RMN6TP includes hardware write protection through the WC pin, three chip-enable address inputs, and an internal power-on reset circuit. These functions help improve data integrity and simplify memory management in embedded applications.
The device is supplied in an 8-pin narrow SOIC package, identified by STMicroelectronics package code SO8N (MN), making it suitable for compact surface-mount PCB designs.
2. Key Benefits
- 512-Kbit Storage Capacity: Provides 64 Kbytes of non-volatile memory for storing configuration data and system information.
- Wide Operating Voltage: Supports supply voltages from 1.8V to 5.5V for flexible integration into different electronic systems.
- High-Speed I²C Interface: Supports communication frequencies up to 1MHz for efficient data transfer.
- Non-Volatile Data Retention: Retains stored information when the system power is disconnected.
- 128-Byte Page Write: Allows multiple bytes to be written within a single page-write cycle.
- Hardware Write Protection: The WC input can disable write operations to protect stored information.
- High Endurance: Supports more than 4 million write cycles under the specified cycling conditions.
- Long Data Retention: Provides data retention of more than 200 years under specified conditions.
- Flexible Device Addressing: Three chip-enable inputs allow multiple compatible devices to share an I²C bus.
- Compact Package: The SO8N package supports space-efficient surface-mount PCB layouts.
3. Features
The M24512-RMN6TP combines high-density non-volatile memory with a simple serial communication interface and hardware data protection functions.
Memory Features
- 512-Kbit EEPROM memory capacity.
- Memory organization: 64K × 8 bits.
- 65,536 individually addressable bytes.
- 128-byte page size.
- Byte-write and page-write operations.
- Random read and sequential read modes.
- More than 4 million write cycles under specified conditions.
- More than 200 years of data retention under specified conditions.
Communication Features
- I²C-compatible two-wire serial interface.
- Maximum clock frequency of 1MHz.
- Standard 100kHz and 400kHz I²C operation.
- Two-wire communication using SDA and SCL.
- Three chip-enable inputs: E0, E1, and E2.
- Compatible with multiple-device I²C bus architectures.
Protection and Reliability Features
- Hardware write protection through the WC pin.
- Internal power-on reset (POR).
- Enhanced ESD and latch-up protection.
- Internal error correction code (ECC).
- Low-power standby operation.
- Wide operating voltage range from 1.8V to 5.5V.
- Industrial operating temperature range from -40°C to +85°C.
These features make the M24512-RMN6TP suitable for applications that require dependable configuration storage, calibration data retention, and frequent communication with embedded controllers.
4. Package
The M24512-RMN6TP uses an 8-pin narrow small-outline integrated circuit package (SO8N), identified by the STMicroelectronics package designation MN.
- Package Type: SO8N / SOIC-8 Narrow
- Package Code: MN
- Number of Pins: 8
- Nominal Body Width: 3.9mm
- Nominal Body Length: 4.9mm
- Lead Pitch: 1.27mm
- Mounting Type: Surface Mount
- Operating Temperature: -40°C to +85°C
- Packaging: Tape and Reel
The SO8N package is widely used in embedded control boards, industrial electronics, communication equipment, and consumer electronic products.
Its eight-pin configuration provides all essential connections for I²C communication, device addressing, write protection, power supply, and ground.
For accurate PCB design, engineers should refer to the official STMicroelectronics package drawing for the recommended footprint, mechanical tolerances, and soldering requirements.
5. Pinout
The M24512-RMN6TP has eight pins, including three chip-enable inputs, two I²C communication terminals, one write-control input, and two power connections.
| Pin Number | Pin Name | Description |
|---|---|---|
| 1 | E0 | Chip-enable address input 0 |
| 2 | E1 | Chip-enable address input 1 |
| 3 | E2 | Chip-enable address input 2 |
| 4 | VSS | Ground connection |
| 5 | SDA | Serial data input/output |
| 6 | SCL | Serial clock input |
| 7 | WC | Write-control input |
| 8 | VCC | Positive supply voltage |
Pin Function Description
E0, E1, E2: These three chip-enable inputs configure the device address on the I²C bus. They allow multiple compatible EEPROM devices to share the same communication interface. Each input should be connected to either VCC or VSS according to the desired address configuration.
SDA: The serial data pin transfers information between the EEPROM and the host controller. It operates as an open-drain interface and requires an appropriate pull-up resistor connected to VCC.
SCL: The serial clock input receives clock pulses from the I²C master and synchronizes data transmission.
WC: The write-control input provides hardware write protection. When WC is driven HIGH, write operations to the memory array are disabled. When WC is LOW or left floating, write operations are enabled according to the datasheet conditions.
VCC: The positive power supply connection. The M24512-R variant supports an operating supply voltage from 1.8V to 5.5V.
VSS: The ground reference connection for the device.
I²C Communication
The M24512-RMN6TP communicates using the I²C protocol. The host controller initiates communication with a START condition, followed by the device select code and memory address information.
The device select code includes the fixed memory identifier and the E2, E1, and E0 chip-enable address states. The final bit determines whether the operation is a read or write command.
For reliable communication, the SDA line must have a suitable pull-up resistor, and the SCL frequency must remain within the supported operating mode.
6. Specifications
The following table summarizes the principal technical specifications of the M24512-RMN6TP.
| Parameter | Specification |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | M24512-RMN6TP |
| Product Family | M24512-R |
| Device Type | Serial EEPROM |
| Memory Capacity | 512 Kbit |
| Memory Organization | 64K × 8 bits |
| Memory Size | 64 Kbytes |
| Interface | I²C / Two-Wire Serial |
| Maximum Clock Frequency | 1MHz |
| Operating Supply Voltage | 1.8V to 5.5V |
| Page Size | 128 Bytes |
| Maximum Write Cycle Time | 5ms |
| Access Time | 500ns |
| Write Endurance | More than 4 Million Cycles |
| Data Retention | More than 200 Years |
| Chip Enable Inputs | 3 (E0, E1, E2) |
| Write Protection | Hardware WC Input |
| Operating Temperature | -40°C to +85°C |
| Package | SO8N / SOIC-8 |
| Package Code | MN |
| Mounting Type | Surface Mount |
| Packaging | Tape and Reel |
Endurance and data retention values are specified under the manufacturer's test conditions. Actual performance depends on operating temperature, write-cycle distribution, supply voltage, and application conditions.
7. Equivalent
When searching for an equivalent to the M24512-RMN6TP, engineers should consider memory capacity, I²C compatibility, operating voltage, page size, write endurance, data retention, device addressing, and package configuration.
Potential Functional Alternatives
| Part Number | Manufacturer | Memory Capacity | Interface |
|---|---|---|---|
| 24AA512 | Microchip Technology | 512 Kbit | I²C |
| 24LC512 | Microchip Technology | 512 Kbit | I²C |
| CAT24C512 | onsemi | 512 Kbit | I²C |
| BR24G512 | ROHM | 512 Kbit | I²C |
| AT24CM01 | Microchip Technology | 1 Mbit | I²C |
Replacement Selection Considerations
- 24AA512: A 512-Kbit I²C EEPROM from Microchip. Verify its minimum operating voltage, write timing, address configuration, and package compatibility.
- 24LC512: A widely used 512-Kbit serial EEPROM with I²C communication. Check voltage limits, page-write behavior, and electrical characteristics before replacement.
- CAT24C512: Another 512-Kbit I²C EEPROM option. Verify chip addressing, write protection, endurance, and pin compatibility.
- BR24G512: A ROHM serial EEPROM alternative for designs requiring comparable memory capacity. Check the exact ordering variant and electrical characteristics.
- AT24CM01: A higher-capacity 1-Mbit EEPROM that may be considered when additional storage is required. It is not a direct capacity-equivalent replacement.
Important: The components listed above are potential functional alternatives, not guaranteed drop-in replacements. I²C device addressing, write-control behavior, supply voltage, page size, memory organization, pin assignments, and package dimensions must be checked before substitution.
8. Manufacturer
STMicroelectronics is a global semiconductor manufacturer supplying a broad portfolio of integrated circuits, microcontrollers, analog devices, power management components, sensors, and memory products.
Its memory portfolio includes serial EEPROMs, NOR Flash devices, and other non-volatile memory solutions designed for embedded systems, industrial equipment, consumer electronics, and automotive applications.
The M24512-R series is designed for applications that require high-density I²C-compatible non-volatile storage. Its wide voltage range, high-speed serial interface, hardware write protection, and compact package provide flexibility for different electronic system architectures.
Official manufacturer website: STMicroelectronics.
Official product documentation: M24512-R / M24512-W / M24512-DF Datasheet.
9. Applications
The M24512-RMN6TP is suitable for electronic systems that require non-volatile storage of configuration data, calibration values, device identification, and operating information.
- Industrial Control Systems: Stores machine configuration, calibration information, operating parameters, and maintenance records.
- Embedded Systems: Provides external non-volatile memory for microcontrollers and embedded processors.
- Consumer Electronics: Stores user preferences, device settings, and product configuration information.
- Communication Equipment: Supports storage of communication parameters, identification information, and hardware configuration data.
- Automotive Electronics: Can be used in suitable automotive subsystems for storing configuration and calibration information, subject to application qualification requirements.
- Power Management Equipment: Stores operating thresholds, calibration values, and system settings in power-related electronic devices.
- Medical Equipment: Supports non-volatile storage of device configuration and calibration information in suitable electronic equipment.
- Smart Sensors: Stores sensor calibration coefficients, identification data, and configuration parameters.
- Metering Equipment: Supports storage of measurement configuration, device information, and accumulated system data.
Why I²C EEPROM Is Important in Embedded Systems
Many electronic systems need to retain important information after the main power supply is disconnected. Examples include calibration values, device settings, manufacturing information, operating limits, and identification parameters.
Using internal microcontroller Flash for these functions may not always be the most suitable solution, particularly when external storage capacity, independent memory access, or a dedicated non-volatile memory device is required.
The M24512-RMN6TP provides 64 Kbytes of storage through a simple two-wire I²C interface. This allows a host microcontroller to read and write data without requiring a large number of additional communication pins.
Its 128-byte page-write capability also helps improve data transfer efficiency when multiple bytes need to be stored together.
Design Considerations
When designing with the M24512-RMN6TP, engineers should select suitable pull-up resistors for the SDA and SCL lines according to bus capacitance, communication frequency, and supply voltage.
The three chip-enable pins must be configured correctly to establish the intended I²C device address. When several EEPROM devices share one bus, their address configurations must be different.
The WC input should be connected according to the required write-protection strategy. Driving WC HIGH disables write operations to the memory array, helping prevent unintended modification of stored data.
For page-write operations, the host controller should observe the 128-byte page boundary. Data exceeding the remaining space in a page can wrap around within that page, potentially overwriting previously written bytes.
A suitable decoupling capacitor should be placed close to the VCC and VSS pins. Firmware should also account for the internal write-cycle time and use acknowledge polling or an appropriate delay before starting the next write operation.
10. Disclaimer
This product information is provided for general technical reference, component selection, and engineering evaluation purposes. Specifications and electrical characteristics are based on available STMicroelectronics documentation and may be updated by the manufacturer.
Customers and design engineers should consult the latest official M24512-R datasheet to verify recommended operating conditions, absolute maximum ratings, timing specifications, endurance characteristics, package dimensions, and assembly requirements before using the device in production designs.
Alternative components listed in this article are potential functional alternatives only. Functional similarity does not guarantee pin-to-pin compatibility, I²C addressing compatibility, or electrical interchangeability.
Designers should validate memory organization, write protection, communication timing, and data integrity within the complete electronic system.
Technical Reference
Manufacturer: STMicroelectronics
Product: M24512-RMN6TP
Product Family: M24512-R
Memory Capacity: 512 Kbit / 64 Kbytes
Official Datasheet: M24512-R / M24512-W / M24512-DF Datasheet (PDF)
Official Website: STMicroelectronics

