MP2451DT-LF-Z – 36V 600mA Buck Converter | Datasheet, Pinout, Specifications & Applications
POWER MANAGEMENT IC · TECHNICAL GUIDE MP2451DT-LF-Z – 36V, 600mA, 2MHz Step-Down ConverterComplete technical guide to the MP2451DT-LF-Z from Monolithic Power Systems, covering features, electrical sp…
- Part No.:
- MP2451DT-LF-Z
- Manufacturer:
- Monolithic Power Systems Inc.
- Package:
- SOT-23-6
- Datasheet:
- MP2451DT-LF-Z.pdf
- Description:
- IC REG BUCK ADJ 600MA SOT23-6
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
MP2451DT-LF-Z – 36V 600mA Buck Converter | Datasheet, Pinout, Specifications & Applications
MP2451DT-LF-Z – 36V, 600mA, 2MHz Step-Down Converter
Complete technical guide to the MP2451DT-LF-Z from Monolithic Power Systems, covering features, electrical specifications, SOT23-6 package, pinout, equivalent options, manufacturer information, and typical applications.
01. Product Introduction
The MP2451DT-LF-Z is a compact, high-frequency, non-synchronous step-down DC-DC converter manufactured by Monolithic Power Systems (MPS). It is designed to provide efficient voltage regulation for electronic equipment requiring a stable low-voltage power supply from a higher-voltage DC source.
The device supports a wide operating input voltage range of 3.3V to 36V and provides up to 600mA of continuous output current. Its nominal 2MHz switching frequency enables designers to use relatively small inductors and capacitors, reducing the overall power supply footprint.
Featuring an integrated 500mΩ power MOSFET, internal compensation, soft-start, and protection functions, the MP2451DT-LF-Z helps simplify compact power supply designs.
The device is supplied in a six-pin SOT23 package, making it suitable for space-constrained PCB layouts in industrial electronics, distributed power systems, and embedded control applications.
The MP2451DT-LF-Z is a non-synchronous buck regulator and requires an external catch diode. Designers should evaluate switching losses, thermal performance, and external component selection when implementing the device.
02. Key Benefits
- Wide Input Voltage Range: Supports 3.3V to 36V input supplies, providing flexibility across different DC power architectures.
- Compact Power Design: The 2MHz switching frequency enables smaller magnetic components and output capacitors.
- High Conversion Efficiency: Optimized switching operation can achieve efficiency above 90% under suitable operating conditions.
- Integrated Power Switch: A built-in 500mΩ MOSFET reduces the number of external power components.
- Low Operating Current: Typical 130µA quiescent current supports applications requiring reduced standby consumption.
- Simplified Design: Internal compensation reduces the need for complex external control circuitry.
- Integrated Protection: Current limiting and thermal shutdown help protect the converter during abnormal conditions.
03. Features
- Wide 3.3V to 36V operating input voltage range.
- Up to 600mA continuous output current.
- 2MHz nominal fixed-frequency switching operation.
- Integrated 500mΩ power MOSFET.
- Adjustable output voltage from 0.8V to approximately 80% of VIN.
- 130µA typical operating quiescent current.
- 3µA typical shutdown supply current.
- Efficiency above 90% under suitable conditions.
- Internal soft-start circuitry.
- Internal loop compensation.
- Compatible with ceramic output capacitors.
- Frequency reduction during light-load operation.
- Cycle-by-cycle current limiting.
- Thermal shutdown protection.
- Compact SOT23-6 surface-mount package.
04. Package
The MP2451DT-LF-Z is available in a compact SOT23-6 package intended for surface-mount PCB assembly.
| Parameter | Description |
|---|---|
| Part Number | MP2451DT-LF-Z |
| Manufacturer | Monolithic Power Systems |
| Package Type | SOT23-6 |
| Number of Pins | 6 |
| Mounting Type | Surface Mount (SMD/SMT) |
| Packaging | Tape and Reel |
| Standard Reel Quantity | 3000 pieces |
| Environmental Version | Lead-free / RoHS-compliant ordering suffix |
The "-LF" suffix identifies the lead-free packaging option, while "-Z" indicates a tape-and-reel ordering configuration.
For reliable thermal and electrical performance, PCB designers should follow the manufacturer's recommended footprint, component placement, and copper routing guidelines.
05. Pinout
The MP2451DT-LF-Z contains six pins that provide switching control, voltage feedback, power input, enable functionality, and grounding.
| Pin | Name | Function |
|---|---|---|
| 1 | BST | Bootstrap supply connection for the internal high-side switch driver. |
| 2 | GND | Ground reference for the converter. |
| 3 | FB | Feedback input used to regulate the output voltage. |
| 4 | EN | Enable control input for converter operation. |
| 5 | VIN | Input voltage supply connection. |
| 6 | SW | Switching node connected to the external inductor and catch diode. |
Pin Configuration: In the manufacturer's top-view package diagram, pins 1 through 3 are BST, GND, and FB, while pins 6 through 4 are SW, VIN, and EN.
Design Note: The output voltage is established using an external resistor divider connected to the FB pin. The bootstrap capacitor, catch diode, inductor, and input/output capacitors must be selected according to the official reference design.
06. Specifications
The following table summarizes the major electrical characteristics of the MP2451DT-LF-Z.
| Parameter | Value |
|---|---|
| Part Number | MP2451DT-LF-Z |
| Manufacturer | Monolithic Power Systems |
| Product Category | DC-DC Switching Regulator |
| Topology | Non-Synchronous Buck |
| Input Voltage Range | 3.3V to 36V |
| Output Voltage Range | 0.8V to 0.8 × VIN |
| Maximum Output Current | 600mA |
| Switching Frequency | 2MHz nominal |
| Internal MOSFET Resistance | 500mΩ |
| Quiescent Current | 130µA typical |
| Shutdown Current | 3µA typical |
| Efficiency | Over 90% under suitable conditions |
| Number of Outputs | 1 |
| Output Type | Adjustable |
| Package | SOT23-6 |
| Mounting Type | Surface Mount |
| Operating Junction Temperature | -40°C to +125°C |
Electrical Design Considerations: The output voltage must remain below the input voltage by a sufficient margin for buck conversion. The achievable output current and efficiency depend on VIN, VOUT, thermal conditions, and external components.
The device operates at a nominal switching frequency of 2MHz, but its frequency may decrease under light-load or protective operating conditions.
Official Datasheet: MP2451DT-LF-Z Datasheet – Monolithic Power Systems
07. Equivalent
When evaluating an MP2451DT-LF-Z equivalent or replacement, engineers should compare input voltage range, maximum output current, switching frequency, package type, feedback reference, and external circuit requirements.
| Part Number | Relationship | Considerations |
|---|---|---|
| MP2451DT-LF-P | Same MP2451DT device family and package. | Alternative ordering configuration; verify reel size and purchasing requirements. |
| MP2451DJ-LF-Z | Same MP2451 regulator family. | Uses a TSOT23-6 package; verify mechanical footprint and assembly compatibility. |
| MP2451DJ-LF-P | Related MP2451 family ordering option. | Check package dimensions and packaging requirements before substitution. |
Replacement Guidance: The MP2451DT-LF-P is a close ordering-code alternative within the same device and package family. Other buck converters may offer similar electrical performance but should not be assumed to provide direct pin-to-pin compatibility.
For existing designs, the most important checks include the operating input voltage, load current, bootstrap circuit, feedback resistor network, diode rating, and PCB layout.
08. Manufacturer
Monolithic Power Systems (MPS) is a semiconductor company specializing in high-performance power management solutions.
Its product portfolio includes DC-DC converters, voltage regulators, power modules, motor drivers, and power management integrated circuits used across industrial, computing, communications, and consumer electronics markets.
The MP2451 series is designed to provide compact and efficient step-down voltage conversion using integrated switching technology and simplified external circuitry.
Engineers and purchasing teams should consult official manufacturer resources to verify electrical characteristics, product availability, lifecycle information, and technical documentation.
Manufacturer Product Page: Monolithic Power Systems – MP2451
Lifecycle Note: Some distributor listings identify the MP2451DT-LF-Z as not recommended for new designs, while the manufacturer's website continues to list the device. Confirm the current lifecycle and recommended alternatives directly with MPS before selecting it for a new product.
09. Applications
The MP2451DT-LF-Z can be used in electronic systems requiring compact step-down voltage conversion from a relatively wide DC input range.
- Distributed Power Systems: Generates lower-voltage supply rails from higher-voltage DC distribution lines.
- Industrial Control Equipment: Provides regulated power for control boards and low-power industrial electronics.
- Embedded Systems: Supplies microcontrollers, sensors, and peripheral circuits within the converter's current and voltage limits.
- Communication Equipment: Supports local power conversion for low-power networking and communication circuitry.
- Consumer Electronics: Enables compact power supply stages where board space and conversion efficiency are important.
- Instrumentation: Provides regulated supply voltages for suitable monitoring and measurement circuits.
- Auxiliary Power Supplies: Converts higher DC bus voltages into low-current auxiliary supply rails.
Application Example: A 12V-powered embedded controller may require a regulated 3.3V rail for its logic circuitry. The MP2451DT-LF-Z can be considered for this conversion when the total current demand remains within the specified 600mA capability and the complete circuit meets thermal and electrical requirements.
For applications with higher current demand or stringent efficiency requirements, engineers should evaluate alternative converter architectures and component options.
10. Disclaimer
This technical guide is provided for general product information, engineering reference, and electronic component selection purposes.
All specifications, electrical characteristics, and application recommendations should be verified against the latest official Monolithic Power Systems datasheet before purchasing or incorporating the MP2451DT-LF-Z into an electronic design.
Component availability, lifecycle status, package options, and ordering information may change without notice.
Equivalent and alternative components are presented for preliminary evaluation only. Functional similarity does not guarantee electrical, mechanical, or pin-to-pin compatibility.
All manufacturer names, trademarks, and product identifiers remain the property of their respective owners.

