Home > The Posts > Product Guides > MP8020GQV-Z MPS | IEEE 802.3bt PoE PD Controller Datasheet, Pinout & Equivalent
MP8020GQV-Z - Monolithic Power Systems Inc.

MP8020GQV-Z MPS | IEEE 802.3bt PoE PD Controller Datasheet, Pinout & Equivalent

Product Technical Guide MP8020GQV-Z IEEE 802.3af/at/bt PoE Powered Device Interface Technical GuideMonolithic Power Systems MP8020GQV-Z is an IEEE 802.3af/at/bt-compliant Power over Ethernet powered-de…

In Stock 6,638 Available Inventory
Part No.:
MP8020GQV-Z
Manufacturer:
Monolithic Power Systems Inc.
Package:
18-VQFN Exposed Pad
Datasheet:
MP8020GQV-Z.pdf
Description:
802.3AF/AT/BT-COMPLIANT, POE POW
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

MP8020GQV-Z MPS | IEEE 802.3bt PoE PD Controller Datasheet, Pinout & Equivalent

Product Technical Guide
MP8020GQV-Z IEEE 802.3af/at/bt PoE Powered Device Interface Technical Guide

Monolithic Power Systems MP8020GQV-Z is an IEEE 802.3af/at/bt-compliant Power over Ethernet powered-device interface supporting up to 71.3W PD operation, integrated hot-swap control, automatic maintain power signature, auxiliary supply management, and a compact QFN-18 package.

Part NumberMP8020GQV-Z
ManufacturerMonolithic Power Systems
Device TypePoE Powered Device Interface
01

Product Introduction

The MP8020GQV-Z is an IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt-compliant Power over Ethernet (PoE) powered-device interface manufactured by Monolithic Power Systems (MPS).

It is designed for network-connected equipment that receives electrical power through Ethernet cabling. The device provides the detection, classification, startup, current control, and power-management functions required at the powered-device interface.

The MP8020 supports powered-device operation up to 71.3W, making it suitable for higher-power PoE applications such as advanced IP cameras, wireless access points, network communication equipment, and industrial Ethernet devices.

For designs requiring up to 51W, the device can use its internal hot-swap MOSFET. Applications above 51W use an external MOSFET controlled through the GATE1 output, subject to the manufacturer's recommended design.

The device also integrates an auxiliary power input detector and an external N-channel MOSFET driver. These functions allow a system to transition between Ethernet-supplied power and a compatible auxiliary power source.

Additional functions include automatic maintain power signature, programmable current limiting, power-good indication, allocated-power identification, and thermal protection.

The MP8020GQV-Z is supplied in an 18-pin QFN package measuring 3mm × 5mm. The -Z suffix identifies the tape-and-reel ordering configuration.

Design Context: The MP8020 is a PoE input-interface device. A complete system typically requires an appropriate downstream DC/DC converter to generate regulated voltages for processors, sensors, motors, and other loads.

02

Key Benefits

Up to 71.3W PoE Operation

Supports high-power IEEE 802.3bt powered-device applications with appropriate external circuitry.

IEEE PoE Compatibility

Supports IEEE 802.3af, 802.3at, and 802.3bt detection and classification requirements.

Auxiliary Power Management

Enables controlled transition between Ethernet power and a compatible auxiliary adapter.

Integrated Protection

Provides current limiting, hot-swap management, undervoltage control, and overtemperature protection.

03

Features

  • IEEE 802.3af, 802.3at, and 802.3bt-compliant powered-device interface
  • Supports up to 71.3W powered-device operation
  • Integrated detection resistor
  • IEEE-compliant detection and multi-event classification
  • Internal hot-swap MOSFET for designs requiring up to 51W
  • External MOSFET gate driver for designs above 51W
  • Configurable input current limit
  • Automatic maintain power signature functionality
  • Auxiliary adapter detection and power-path management
  • GATE2 driver for an external auxiliary power-path MOSFET
  • Power-good output for system sequencing
  • Allocated power-type indication outputs
  • Wide input undervoltage-lockout hysteresis
  • 150°C overtemperature protection threshold
  • Compact QFN-18 package measuring 3mm × 5mm
  • Surface-mount assembly compatibility
  • Lead-free and RoHS-compliant device configuration

Engineering Note: The 71.3W figure represents the supported PD power capability under appropriate PoE operating conditions. It does not mean that the integrated hot-swap MOSFET alone is rated for continuous 71.3W operation.

04

Package

The MP8020GQV-Z uses a compact QFN-18 surface-mount package.

  • Package: QFN-18
  • Package Dimensions: 3mm × 5mm
  • Terminal Count: 18
  • Mounting: Surface Mount
  • Package Construction: Leadless QFN
  • Ordering Suffix: -Z
  • Packaging: Tape and Reel
  • Standard Reel Quantity: 5,000 pieces
  • Moisture Sensitivity Level: MSL 1

The package supports compact PoE front-end implementations in network devices with limited PCB area.

For reliable thermal and electrical performance, follow the manufacturer's recommended PCB footprint, exposed-pad connection, and copper-layout guidelines.

The package drawing should be used to confirm pad geometry, pin-1 identification, stencil design, and soldering requirements before production.

05

Pinout

The MP8020GQV-Z provides 18 terminals for PoE input detection, power classification, hot-swap control, auxiliary power management, and status signaling.

Pin Symbol Function
1 VDD PoE input supply connection.
2 GND Device ground reference.
3 GATE2 Gate driver for the external auxiliary power-path MOSFET.
4 VADP Auxiliary adapter voltage-related input.
5 AUX Auxiliary supply detection and control input.
6 R_MPS Maintain power signature configuration connection.
7 ILIM Programmable current-limit configuration.
8 DUTY Maintain power signature timing or duty-cycle configuration.
9 PRI Power-path priority configuration.
10 CLSA PoE classification configuration input.
11 CLSB PoE classification configuration input.
12 BT IEEE 802.3bt-related status indication.
13 TYP2 Allocated power-type indication.
14 TYP1 Allocated power-type indication.
15 PG Power-good status output.
16 SRC Internal hot-swap MOSFET source-related connection.
17 GATE1 External hot-swap MOSFET gate control.
18 SENSE External current-sensing connection.
VDD / GNDPoE front-end supply and ground reference.
GATE1 / SENSE / SRCHot-swap power-path control and current sensing.
GATE2 / VADP / AUXAuxiliary adapter power-path management.
CLSA / CLSBPoE classification configuration.
BT / TYP1 / TYP2Power classification and allocation status.
PG / ILIM / DUTY / R_MPS / PRIPower status, current-limit configuration, maintain power signature, and priority control.

Pinout Verification: The terminal list follows the manufacturer's QFN-18 top-view package reference. The physical package orientation, exposed-pad requirements, and exact external component connections must be verified against the official datasheet.

06

Specifications

Parameter Value
Part Number MP8020GQV-Z
Manufacturer Monolithic Power Systems (MPS)
Device Type PoE Powered Device Interface Controller
Supported Standards IEEE 802.3af / 802.3at / 802.3bt
Number of Channels 1
Maximum Supported PD Power 71.3W
Internal Hot-Swap MOSFET Design Capability Up to 51W
Higher-Power Implementation External MOSFET with GATE1 control
PoE Detection Resistor Integrated
PoE Classification Supported, including multi-event classification
Current Limiting Configurable
Automatic Maintain Power Signature Supported
Auxiliary Supply Detection Supported
Auxiliary Power MOSFET Driver GATE2
Power-Good Indication PG output
Allocated Power-Type Indication TYP1 / TYP2 / BT
Overtemperature Protection 150°C threshold
Operating Junction Temperature Range -40°C to +125°C
Package QFN-18
Package Size 3mm × 5mm
Mounting Surface Mount
Packaging Tape and Reel
Standard Reel Quantity 5,000
Manufacturer-Listed Status Active

Power Capability: The 71.3W supported PD power figure depends on the appropriate IEEE 802.3bt power allocation, cabling, power-sourcing equipment, and implementation of the external power path.

Hot-Swap Architecture: The internal hot-swap MOSFET is intended for designs up to 51W. Higher-power implementations require the manufacturer's specified external MOSFET configuration.

Input Supply: PoE startup and operating thresholds must be taken from the manufacturer's electrical characteristics. A distributor-listed supply range should not be interpreted as a guarantee of full-power operation at every input voltage.

Auxiliary Input: The auxiliary adapter path supports alternative power sources when configured according to the manufacturer's voltage and priority requirements.

Thermal Protection: The 150°C protection threshold is a protective function, not a recommended continuous operating junction temperature.

Power Conversion: The MP8020 does not provide a fixed regulated 3.3V, 5V, or 12V output by itself. Downstream conversion circuitry must be selected for the required system supply rails.

07

Equivalent

When selecting an MP8020GQV-Z equivalent or replacement, engineers should evaluate IEEE standard compatibility, power capability, classification behavior, hot-swap implementation, auxiliary power support, pinout, and package dimensions.

MP8020GQV-P: A manufacturer-listed alternative ordering code for the same MP8020 device. MPS identifies the -P and -Z suffixes as packaging or reel-size variants rather than different electrical functions.

MP8020GQV: The base device designation. Confirm the full ordering suffix, packaging configuration, and procurement requirements.

Other IEEE 802.3bt PoE PD Controllers: Devices from MPS or other semiconductor manufacturers may support similar powered-device functions. However, differences in power classification, integrated MOSFET capability, current sensing, auxiliary power management, and package pinout may require PCB and circuit redesign.

Replacement Recommendation: For an existing MP8020-based design, MP8020GQV-P is the most relevant manufacturer-listed alternative to evaluate first. Unrelated PoE PD controllers should not be considered direct replacements without detailed electrical and mechanical validation.

08

Manufacturer

Monolithic Power Systems (MPS) is a semiconductor manufacturer specializing in power-management integrated circuits and power-conversion technologies.

The MP8020 belongs to the company's Power over Ethernet powered-device product portfolio and is intended for Ethernet-powered industrial, communication, and networking equipment.

Official Product Page: MPS MP8020 Product Information

Official Datasheet: MP8020 IEEE 802.3af/at/bt PoE Powered Device Interface Datasheet

Manufacturer Website: www.monolithicpower.com

Distributor Reference: MP8020GQV-Z Product Listing

For purchasing and incoming quality control, verify the complete manufacturer part number, reel labeling, lot information, top marking, package condition, and traceability documentation.

09

Applications

IP Security Cameras

Supports Ethernet-powered surveillance cameras and higher-power imaging systems.

Wireless Access Points

Provides PoE power-interface functionality for network access equipment.

VoIP and Video Phones

Supports communication terminals powered through Ethernet infrastructure.

Industrial Ethernet Devices

Enables PoE-powered monitoring and industrial network equipment.

IoT Gateways

Supports connected gateways and distributed network devices requiring centralized power delivery.

Pico Base Stations

Provides PoE interface functions for compatible compact communication infrastructure.

Typical PoE Power Architecture: Ethernet input signals pass through the appropriate magnetic components and PoE rectification circuitry. The resulting supply connects to the MP8020 powered-device interface, which performs detection, classification, and controlled power-path startup.

The output power path then supplies a suitable downstream DC/DC converter, which generates the regulated voltage rails required by the application.

IEEE 802.3bt Design: Higher-power designs must account for power classification, allocated power, cable losses, input current limits, external MOSFET selection, and thermal management.

Auxiliary Adapter Support: Equipment that can receive power from both Ethernet and an external adapter may use the MP8020 auxiliary power-detection and gate-control features. The priority configuration must follow the intended system behavior.

Automatic Maintain Power Signature: Light-load systems can use the device's maintain power signature functionality to help satisfy the relevant PSE power-maintenance requirements.

PCB Layout: Keep high-current PoE paths short and appropriately sized. Observe thermal requirements, transient protection, grounding, and isolation requirements for the complete Ethernet-powered system.

System Validation: Verify operation with compatible IEEE 802.3af/at/bt power-sourcing equipment, including startup, classification, auxiliary source transitions, maximum load, current-limit events, and thermal behavior.

10

Disclaimer

This technical guide is provided for product identification, engineering reference, and procurement support. All specifications, pin assignments, package dimensions, power limits, classification behavior, protection thresholds, and application requirements should be verified against the latest official Monolithic Power Systems datasheet before design or purchase. The MP8020GQV-Z supports up to 71.3W powered-device operation under appropriate system conditions; this rating does not imply that the integrated hot-swap MOSFET alone supports the full power level. Suggested alternatives are not guaranteed direct replacements unless explicitly confirmed by the manufacturer. Product availability, lifecycle status, pricing, and delivery lead times may change without notice.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```