NC7SZ125M5X – TinyLogic UHS Single Buffer with 3-State Output | Datasheet, Pinout & Applications
LOGIC IC · TECHNICAL GUIDE NC7SZ125M5X – TinyLogic UHS Single Buffer with 3-State OutputComplete technical guide to the onsemi NC7SZ125M5X, covering high-speed CMOS logic, key benefits, SOT-23-5 pack…
- Part No.:
- NC7SZ125M5X
- Manufacturer:
- onsemi
- Package:
- SC-74A, SOT-753
- Datasheet:
- NC7SZ125M5X.pdf
- Description:
- IC BUF NON-INVERT 5.5V SOT23-5
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
NC7SZ125M5X – TinyLogic UHS Single Buffer with 3-State Output | Datasheet, Pinout & Applications
NC7SZ125M5X – TinyLogic UHS Single Buffer with 3-State Output
Complete technical guide to the onsemi NC7SZ125M5X, covering high-speed CMOS logic, key benefits, SOT-23-5 package, pinout, specifications, equivalent components, manufacturer information, and practical applications.
01. Product Introduction
The NC7SZ125M5X is a single-channel, non-inverting CMOS logic buffer with a three-state output, manufactured by onsemi. It belongs to the TinyLogic Ultra-High Speed (UHS) family and is designed for high-speed digital signal buffering, logic isolation, and compact electronic systems.
The device operates across a wide supply voltage range of 1.65V to 5.5V, making it suitable for various low-voltage digital logic environments. Its three-state output can be enabled or placed in a high-impedance condition using an active-low output enable input.
Featuring a typical propagation delay of 2.6ns at 5V with a 50pF load, the NC7SZ125M5X supports fast signal transmission while maintaining low static power consumption.
The compact SOT-23-5 package makes this component particularly useful for space-constrained PCB designs, portable electronic equipment, embedded control systems, and digital interface applications.
02. Key Benefits
- Ultra-High-Speed Operation: Typical propagation delay of 2.6ns under specified 5V test conditions.
- Wide Supply Voltage Range: Supports 1.65V to 5.5V operation.
- Three-State Output: Allows the output to enter a high-impedance state for controlled signal isolation.
- High Output Drive: Supports ±24mA output drive at a 3V supply under specified conditions.
- Low Static Power Consumption: CMOS architecture helps minimize standby power requirements.
- Compact Package: Five-pin SOT-23 construction reduces PCB footprint.
- Input Overvoltage Tolerance: Inputs tolerate voltages up to 5.5V, independent of the operating supply voltage.
- Flexible Digital Interfaces: Suitable for signal buffering and selected mixed-voltage logic applications.
03. Features
- Single non-inverting CMOS buffer.
- Three-state output with active-low output enable.
- Ultra-High Speed TinyLogic architecture.
- Operating supply voltage: 1.65V to 5.5V.
- Typical propagation delay: 2.6ns at VCC = 5V and CL = 50pF.
- High output drive capability: ±24mA at 3V.
- Low static power dissipation.
- Input voltage tolerance up to 5.5V.
- High-impedance input and output behavior when VCC is 0V.
- Output overvoltage tolerance in the three-state condition.
- Integrated noise and EMI reduction circuitry.
- Operating ambient temperature: -40°C to +85°C.
- Five-pin SOT-23 surface-mount package.
- Pb-free and RoHS-compliant construction.
04. Package
The NC7SZ125M5X is supplied in a compact five-pin SOT-23 package designed for high-density surface-mount PCB assembly.
| Package Parameter | Description |
|---|---|
| Part Number | NC7SZ125M5X |
| Manufacturer | onsemi |
| Package Type | SOT-23-5 / SC-74A |
| Number of Pins | 5 |
| Mounting Type | Surface Mount |
| Device Marking | 7Z25 |
| Packaging | Tape and Reel |
| Standard Reel Quantity | 3000 units |
| Compliance | Pb-Free, RoHS Compliant |
The small package supports automated assembly and is suitable for compact digital interface circuits where board space is limited.
05. Pinout
The NC7SZ125M5X contains one data input, one active-low output enable input, one three-state output, and two power connections.
| Pin | Symbol | Function |
|---|---|---|
| 1 | OE | Active-low output enable input. |
| 2 | A | Digital data input. |
| 3 | GND | Ground connection. |
| 4 | Y | Three-state non-inverting output. |
| 5 | VCC | Positive supply voltage. |
Logic Function and Truth Table
| OE | A | Y |
|---|---|---|
| L | L | L |
| L | H | H |
| H | X | Z |
L = Low, H = High, X = Don't Care, Z = High Impedance.
Design Note: When OE is low, the output follows the logic level at input A. When OE is high, the output enters the high-impedance state. Unused CMOS inputs must be connected to valid logic levels rather than left floating.
06. Specifications
The following table summarizes the primary electrical and mechanical specifications of the NC7SZ125M5X.
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Part Number | NC7SZ125M5X |
| Product Category | Logic Buffer IC |
| Logic Family | TinyLogic UHS |
| Logic Function | Non-Inverting Buffer |
| Number of Channels | 1 |
| Bits per Channel | 1 |
| Output Type | Three-State |
| Output Enable | Active Low |
| Supply Voltage | 1.65V – 5.5V |
| Input Voltage Range | 0V – 5.5V |
| Propagation Delay | 2.6ns typical at 5V, 50pF load |
| Output Drive | ±24mA at 3V under specified conditions |
| Operating Temperature | -40°C to +85°C |
| Package | SOT-23-5 |
| Mounting Type | Surface Mount |
| Packaging | Tape and Reel |
Technical Consideration: Propagation delay and output drive capability depend on supply voltage, load capacitance, and operating conditions. The device is intended for digital signal buffering rather than continuous power delivery.
Official Datasheet: NC7SZ125 onsemi Datasheet (PDF)
07. Equivalent
When evaluating NC7SZ125M5X equivalents or alternative logic buffers, engineers should compare supply voltage, input threshold levels, propagation delay, output drive, enable polarity, three-state behavior, and package pin configuration.
| Part Number | Relationship | Replacement Considerations |
|---|---|---|
| NC7SZ125P5X | Same TinyLogic buffer family in SC-88A packaging. | Different package footprint; PCB compatibility must be checked. |
| NL17SZ125DFT2G | Related onsemi single three-state logic buffer. | Compare package dimensions, timing, and electrical ratings. |
| SN74LVC1G125DBVR | Texas Instruments single non-inverting three-state buffer. | Potential functional alternative; verify pinout and electrical compatibility. |
| 74LVC1G125W5-7 | Diodes Incorporated single three-state logic buffer. | Review logic thresholds, output current, timing, and package compatibility. |
| TC7SZ125F | Toshiba single high-speed three-state buffer family. | Confirm exact ordering suffix, package, and operating conditions. |
Important: Functional similarity does not guarantee pin-to-pin compatibility. Designers must verify the latest datasheets, package drawings, logic levels, and switching characteristics before substituting components.
08. Manufacturer
onsemi is a semiconductor manufacturer providing power management, analog, sensing, and logic semiconductor solutions for industrial, automotive, communication, and consumer electronics markets.
The NC7SZ125M5X is part of the TinyLogic family originally developed by Fairchild Semiconductor. The family is recognized for compact packaging, low power consumption, and high-speed digital logic performance.
For technical verification, engineers should consult the manufacturer's official datasheet, recommended operating conditions, package drawings, and application information.
Manufacturer Website: onsemi Official Website
09. Applications
The NC7SZ125M5X is suitable for digital circuits requiring high-speed buffering, controlled output isolation, and compact logic integration.
- Microcontroller Interfaces: Buffers digital control signals between microcontrollers and peripheral devices.
- Digital Signal Isolation: Provides high-impedance output control for selectively disconnecting digital signal paths.
- Embedded Systems: Supports logic buffering in compact electronic control boards.
- Communication Equipment: Buffers digital interface signals within communication and networking subsystems.
- Portable Electronics: Offers compact, low-power logic control for battery-powered devices.
- Mixed-Voltage Interfaces: Supports selected voltage-level interfacing applications using its input overvoltage tolerance.
- Industrial Control Systems: Provides logic signal conditioning and output enable control in digital interfaces.
- Shared Digital Signal Lines: Enables controlled bus access when only one output driver is active at a time.
The combination of ultra-high-speed operation, low static power consumption, and three-state output control makes the NC7SZ125M5X useful in modern compact digital systems.
10. Disclaimer
This technical guide is intended for general engineering reference, electronic component selection, and product research. Electrical characteristics and packaging information are based on publicly available manufacturer documentation and may change without notice.
Alternative components should be independently verified for electrical, mechanical, and functional compatibility. Component availability and product lifecycle status should be confirmed with the manufacturer or authorized distribution channels.
All trademarks, manufacturer names, and product identifiers remain the property of their respective owners. Always consult the latest official onsemi datasheet before purchasing or integrating the NC7SZ125M5X into an electronic design.

