Home > The Posts > Product Guides > PCM5100APWR Datasheet, Pinout, Specifications, Equivalent & Applications | TI Audio DAC
PCM5100APWR - Texas Instruments

PCM5100APWR Datasheet, Pinout, Specifications, Equivalent & Applications | TI Audio DAC

Electronic Component Technical GuidePCM5100APWR – 32-Bit 384kHz Stereo Audio DACThe PCM5100APWR is a high-performance stereo digital-to-analog converter manufactured by Texas Instruments. Featuring a …

In Stock 4,078 Available Inventory
Part No.:
PCM5100APWR
Manufacturer:
Texas Instruments
Package:
20-TSSOP (0.173", 4.40mm Width)
Datasheet:
PCM5100APWR.pdf
Description:
IC DAC 16/24/32BIT 384K 20TSSOP
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

PCM5100APWR Datasheet, Pinout, Specifications, Equivalent & Applications | TI Audio DAC

Electronic Component Technical Guide

PCM5100APWR – 32-Bit 384kHz Stereo Audio DAC

The PCM5100APWR is a high-performance stereo digital-to-analog converter manufactured by Texas Instruments. Featuring a 32-bit, 384kHz PCM interface, 2.1VRMS line-level outputs, integrated audio PLL and DirectPath technology, it is designed for high-quality digital audio conversion in compact electronic systems.

Manufacturer: Texas Instruments Audio: 32-Bit / 384kHz Package: TSSOP-20

01. Product Introduction

The PCM5100APWR is a stereo audio digital-to-analog converter (DAC) developed by Texas Instruments for converting digital PCM audio signals into high-quality analog audio outputs.

It belongs to the PCM510xA family of audio DACs and supports 16-bit, 24-bit and 32-bit digital audio input formats with sampling rates up to 384kHz.

The device integrates a high-performance audio phase-locked loop (PLL), allowing the system clock to be generated internally using the audio bit clock as a reference.

This capability simplifies digital audio system design by reducing the need for a separate external master clock in supported configurations.

The PCM5100APWR also incorporates Texas Instruments DirectPath technology, enabling ground-centered analog outputs without requiring conventional DC-blocking capacitors.

Its stereo outputs provide a nominal 2.1VRMS line-level signal, making the device suitable for connection to audio preamplifiers, active speakers, external power amplifiers and other line-level audio equipment.

The PCM5100APWR is a digital-to-analog converter rather than a speaker power amplifier. Applications requiring direct loudspeaker drive generally need an additional power amplification stage.

Product Overview:

  • Part Number: PCM5100APWR
  • Manufacturer: Texas Instruments
  • Product Family: PCM510xA
  • Device Type: Stereo Audio DAC
  • Number of Channels: 2
  • Digital Audio Resolution: 16, 24 and 32 Bits
  • Maximum PCM Sampling Rate: 384kHz
  • Analog Output Level: 2.1VRMS
  • Dynamic Range: 100dB Typical
  • Digital Interface: I2S and Left-Justified PCM
  • Integrated PLL: Yes
  • Package: TSSOP-20
  • Operating Temperature: -25°C to +85°C

02. Key Benefits

High-Resolution Digital Audio Support

The PCM5100APWR supports PCM input words up to 32 bits and sampling frequencies up to 384kHz, providing flexibility for digital audio system integration.

Integrated Audio PLL

The built-in PLL can derive the internal system clock from the incoming bit clock, simplifying designs that do not provide a dedicated external master clock.

2.1VRMS Line-Level Output

The device provides a relatively high line-level analog output, supporting direct connection to compatible amplifier input stages.

DirectPath Output Technology

Integrated charge-pump circuitry enables ground-centered analog outputs without the need for traditional large output coupling capacitors.

Reduced External Component Count

Integrated clock generation, analog output circuitry and hardware configuration functions help simplify PCB design.

Automatic Power Saving

The DAC automatically enters a power-saving state when the relevant audio clocks are inactive.

Flexible Audio System Integration

The PCM5100APWR is suitable for digital audio processors, embedded audio platforms, media equipment and other systems with compatible PCM interfaces.

03. Features

  • Two-channel stereo digital-to-analog conversion.
  • 16-bit, 24-bit and 32-bit PCM audio data support.
  • Sampling frequencies up to 384kHz.
  • 2.1VRMS nominal analog line-level output.
  • 100dB typical dynamic range for PCM5100A.
  • Integrated high-performance audio PLL.
  • Operation without an external master clock in supported configurations.
  • I2S and left-justified PCM interface formats.
  • DirectPath ground-centered analog output technology.
  • Integrated charge-pump circuitry.
  • Soft mute and analog mute functions.
  • Selectable digital filter characteristics.
  • Hardware pin-based configuration.
  • Automatic power-save operation when audio clocks stop.
  • Compact 20-pin TSSOP surface-mount package.

High-Resolution PCM Processing

The PCM5100APWR accepts digital audio data in several standard PCM word lengths. The maximum supported input word length should not be confused with the converter's measured dynamic range or effective analog resolution.

Integrated Clock Management

The audio PLL reduces the need for external clock-generation circuitry in suitable systems.

Analog Output Architecture

The integrated charge pump supports ground-centered outputs, simplifying connections to downstream line-level analog stages.

Digital Filter Selection

The device offers selectable digital filtering behavior, allowing designers to choose an appropriate latency and frequency-response characteristic.

04. Package

The PCM5100APWR is supplied in a 20-pin TSSOP package, designated PW by Texas Instruments.

Package Attribute Description
Package Type TSSOP-20
TI Package Code PW
Pin Count 20
Nominal Body Size 6.5 × 4.4mm
Pin Pitch 0.65mm
Mounting Surface Mount
Package Marking PCM5100A
Packaging Tape and Reel
Standard Reel Quantity 2,000 Pieces
Moisture Sensitivity MSL 1

The compact TSSOP-20 package supports automated PCB assembly and high-density audio circuit layouts.

Because the device combines digital audio signals, analog outputs and charge-pump circuitry, careful PCB layout is important for minimizing interference and maintaining audio performance.

Engineers should follow the official TI mechanical drawings and recommended layout practices for production designs.

05. Pinout

The PCM5100APWR uses 20 pins for power supplies, digital audio inputs, analog outputs, charge-pump connections and hardware configuration.

Pin Name Function
1 CPVDD Charge-pump power supply
2 CAPP Positive flying-capacitor terminal
3 CPGND Charge-pump ground
4 CAPM Negative flying-capacitor terminal
5 VNEG Negative charge-pump rail
6 OUTL Left-channel analog output
7 OUTR Right-channel analog output
8 AVDD Analog power supply
9 AGND Analog ground
10 DEMP De-emphasis selection
11 FLT Digital filter selection
12 SCK System clock input
13 BCK Audio bit clock
14 DIN Digital audio data input
15 LRCK Audio left/right word clock
16 FMT Audio data format selection
17 XSMT Soft mute control
18 LDOO Internal regulator output or external logic supply connection, as configured
19 DGND Digital ground
20 DVDD Digital power supply

PCM5100APWR TSSOP-20 Pin Configuration – Top View:

          PCM5100APWR
            TSSOP-20

 CPVDD  1 |          | 20 DVDD
 CAPP   2 |          | 19 DGND
 CPGND  3 |          | 18 LDOO
 CAPM   4 |          | 17 XSMT
 VNEG   5 |          | 16 FMT
 OUTL   6 |          | 15 LRCK
 OUTR   7 |          | 14 DIN
 AVDD   8 |          | 13 BCK
 AGND   9 |          | 12 SCK
 DEMP  10 |__________| 11 FLT
  

Simplified Digital Audio Signal Flow:

 Digital Audio Source
     |
     | BCK
     | LRCK
     | DIN
     v
 +----------------+
 |  PCM5100APWR   |
 |   Stereo DAC   |
 +----------------+
     |        |
    OUTL     OUTR
     |        |
     v        v
  Left      Right
  Analog    Analog
  Audio     Audio
     |        |
     +--------+
          |
    Audio Amplifier
          |
       Speakers
  

The PCM5100APWR converts digital PCM audio into analog line-level signals. A separate amplifier may be required to drive speakers or headphones.

External charge-pump capacitors and power-supply decoupling components must be selected and connected according to the manufacturer's recommended application circuit.

Unused clock and configuration inputs should not be left in undefined states unless specifically permitted by the datasheet.

06. Specifications

The following table summarizes the main PCM5100APWR characteristics.

Parameter Symbol Value
Manufacturer - Texas Instruments
Part Number - PCM5100APWR
Device Type - Stereo Audio DAC
Number of Channels - 2
Digital Audio Word Length - 16, 24, 32 Bits
Maximum PCM Sampling Rate fS 384kHz
Analog Output Level VOUT 2.1VRMS Nominal
Dynamic Range DR 100dB Typical
Audio Interface - I2S / Left-Justified
Clock Generation - Integrated PLL
Output Technology - DirectPath
Analog Supply AVDD 3.3V Nominal
Digital Supply DVDD 1.8V or 3.3V Nominal
Charge-Pump Supply CPVDD 3.3V Nominal
Line Output Load - Supports loads down to 1kΩ under specified conditions
Automatic Power Save - Supported
Operating Temperature TA -25°C to +85°C
Package - TSSOP-20
Package Code - PW

Understanding 32-Bit Audio Support

The PCM5100APWR supports 32-bit PCM input data. This describes the digital interface word length and does not mean that the analog output achieves 32 bits of noise-free resolution.

The device's analog dynamic range and distortion specifications provide more useful measures of real audio conversion performance.

Understanding 384kHz Sampling

The maximum PCM sampling frequency is 384kHz. Actual system operation depends on clock configuration, digital audio format and the source device.

Understanding the 2.1VRMS Output

The nominal 2.1VRMS output is intended for line-level audio connections.

It does not indicate that the DAC can directly deliver high power into a low-impedance loudspeaker.

Official Datasheet: Texas Instruments PCM510xA Audio DAC Datasheet

07. Equivalent

When selecting a PCM5100APWR equivalent, engineers should compare the digital audio interface, analog output characteristics, dynamic range, supply requirements, package and pin configuration.

The PCM5100APWR belongs to the PCM510xA stereo DAC family, which includes devices with different analog performance specifications.

Part Number Category Replacement Consideration
PCM5100APWR Stereo Audio DAC Original device
PCM5100APW Stereo Audio DAC Same device; tube packaging
PCM5100APWRG4 Stereo Audio DAC Related ordering variant; verify procurement requirements
PCM5101APWR Stereo Audio DAC Related family device with different dynamic range
PCM5102APWR Stereo Audio DAC Higher-performance family member; verify design compatibility
PCM5100AQPWRQ1 Automotive Audio DAC Automotive-qualified family variant; verify system requirements

PCM510xA Family Comparison:

Device Typical Dynamic Range Output Level
PCM5100A 100dB 2.1VRMS
PCM5101A 106dB 2.1VRMS
PCM5102A 112dB 2.1VRMS

Replacement Selection Checklist:

  • Compatible stereo DAC architecture.
  • Support for the required PCM sampling frequency.
  • Compatible I2S or left-justified digital audio interface.
  • Suitable analog output level and load capability.
  • Acceptable dynamic range and distortion performance.
  • Compatible supply voltage requirements.
  • Matching TSSOP-20 footprint and pin assignments.
  • Compatible clock-generation requirements.
  • Suitable hardware configuration and mute behavior.

Devices within the PCM510xA family share important architectural characteristics, but replacement suitability must be verified against the complete datasheet and circuit design.

Important: No alternative should be approved solely because it belongs to the same product family.

08. Manufacturer

The PCM5100APWR is manufactured by Texas Instruments (TI), a global semiconductor company specializing in analog and embedded processing technologies.

Texas Instruments develops audio converters, amplifiers, power management ICs, interface components and embedded processing devices for a wide range of electronic applications.

The PCM510xA family is designed for high-quality stereo digital-to-analog conversion with integrated clock management and simplified analog output circuitry.

Manufacturer Information:

For procurement, buyers should confirm the complete manufacturer ordering code, package marking, tape-and-reel format, traceability and applicable quality documentation.

Pricing and inventory availability should be verified with the selected supplier at the time of purchase.

09. Applications

The PCM5100APWR is suitable for digital audio systems requiring stereo digital-to-analog conversion and line-level analog outputs.

1. Digital Audio Players

The DAC converts digital PCM audio streams into analog signals for playback through compatible downstream audio circuitry.

2. Home Audio Equipment

Home audio systems can use the PCM5100APWR to provide stereo line-level outputs for amplifiers and other audio components.

3. Smart Speaker Systems

Embedded audio platforms may use the DAC between a digital audio processor and a separate speaker power amplifier.

4. Embedded Linux Audio

Embedded systems with compatible I2S interfaces can integrate the PCM5100APWR for stereo analog audio output.

5. Multimedia Equipment

Media players, entertainment systems and digital audio modules can use the device for PCM-to-analog conversion.

6. Audio Development Boards

The PCM5100APWR is suitable for evaluation boards and educational audio projects requiring a stereo DAC interface.

7. Digital Signal Processing Systems

Digital signal processors can provide compatible PCM data to the DAC for analog playback or subsequent analog signal processing.

8. Active Speaker Electronics

The DAC can provide analog input signals to an external power amplifier in active speaker systems.

9. Industrial Audio Interfaces

Industrial equipment requiring stereo audio playback or audible signaling may incorporate the DAC into its audio subsystem.

10. Custom High-Resolution Audio Modules

The PCM5100APWR can be used in custom audio modules that require high-sample-rate PCM support and compact surface-mount packaging.

Application Design Recommendations:

  • Verify digital audio interface timing and format compatibility.
  • Use appropriate analog and digital power-supply decoupling.
  • Follow the recommended charge-pump capacitor connections.
  • Keep analog output traces away from high-frequency digital signals.
  • Maintain suitable ground-return paths.
  • Verify output load impedance and downstream amplifier requirements.
  • Configure hardware selection pins correctly.
  • Evaluate mute behavior during startup and shutdown.
  • Confirm the selected sampling rate and clock configuration.
  • Follow the manufacturer's recommended PCB layout practices.

The PCM5100APWR is particularly useful for engineers developing digital audio equipment that requires a compact stereo DAC with integrated clock generation and direct line-level analog outputs.

10. Disclaimer

This PCM5100APWR technical guide is provided for general engineering reference, electronic component identification and product selection.

Electrical specifications and product characteristics are based on publicly available Texas Instruments technical documentation.

Digital audio interface resolution, analog dynamic range and output power are different specifications and should not be treated as interchangeable.

The PCM5100APWR is a stereo digital-to-analog converter, not a standalone loudspeaker power amplifier.

Actual audio performance depends on clock quality, power-supply noise, PCB layout, output loading, external components and system operating conditions.

Potential replacement devices must be independently evaluated for electrical, mechanical and functional compatibility.

Manufacturer specifications, ordering information and product availability may change without notice.

Official Technical Reference: Texas Instruments PCM510xA Stereo Audio DAC Datasheet

Editorial Note: This document is an independent technical overview intended to support electronic component research and engineering decisions. It is not an official Texas Instruments publication or a guarantee of component availability, interchangeability or suitability for a specific application.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```