PCM5122PWR Texas Instruments | 32-Bit Stereo Audio DAC Technical Guide
Product Technical Guide PCM5122PWR 32-Bit Stereo Audio DAC Technical GuideTexas Instruments high-performance stereo digital-to-analog converter featuring 112dB dynamic range, 32-bit PCM audio support, …
- Part No.:
- PCM5122PWR
- Manufacturer:
- Texas Instruments
- Package:
- 28-TSSOP (0.173", 4.40mm Width)
- Datasheet:
- PCM5122PWR.pdf
- Description:
- IC DAC 16/24/32BIT 384K 28TSSOP
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
PCM5122PWR Texas Instruments | 32-Bit Stereo Audio DAC Technical Guide
Texas Instruments high-performance stereo digital-to-analog converter featuring 112dB dynamic range, 32-bit PCM audio support, sampling rates up to 384kHz, 2.1Vrms line-level output, integrated DirectPath technology, and 28-pin TSSOP packaging.
Product Introduction
The PCM5122PWR is a high-performance stereo audio digital-to-analog converter manufactured by Texas Instruments. It converts digital PCM audio data into high-quality analog audio signals for home audio systems, digital media equipment, embedded audio devices, and professional audio applications.
The device belongs to the PCM512x family and incorporates a 32-bit audio interface with support for sampling frequencies from 8kHz to 384kHz. It accepts common serial audio formats including I2S, left-justified, right-justified, and TDM/DSP formats.
The PCM5122 offers a typical 112dB dynamic range and 112dB signal-to-noise ratio, with total harmonic distortion plus noise of approximately -93dB under specified test conditions.
Its integrated DirectPath output architecture and negative charge pump provide ground-centered analog outputs, eliminating the need for conventional large DC-blocking capacitors in many line-output designs.
The device delivers a typical full-scale single-ended analog output level of 2.1Vrms, making it suitable for connection to external audio amplifiers, line-input stages, and other compatible analog audio equipment.
Integrated digital filtering, volume control, soft muting, clock management, and optional fixed-function audio processing help simplify audio system design.
The PCM5122 supports both software-controlled and hardware-controlled configurations. Software control is available through I2C or SPI, while hardware mode allows selected functions to be configured using external logic connections.
The PCM5122PWR is supplied in a 28-pin TSSOP package and is specified for operation from -25°C to +85°C.
Key Benefits
High-Fidelity Audio
112dB dynamic range and low distortion support detailed stereo audio reproduction in high-quality playback equipment.
High-Resolution PCM Support
Accepts audio data up to 32 bits with sampling frequencies reaching 384kHz for flexible digital audio integration.
DirectPath Analog Outputs
Integrated ground-centered line drivers provide approximately 2.1Vrms output without requiring large DC-blocking capacitors.
Flexible Audio Configuration
Hardware, I2C, and SPI control options support different embedded architectures and audio processing requirements.
Features
- High-performance stereo audio digital-to-analog converter
- Two independent analog output channels
- 32-bit digital audio data support
- Sampling frequency range from 8kHz to 384kHz
- 112dB typical dynamic range
- 112dB typical signal-to-noise ratio
- -93dB typical THD+N under specified conditions
- 2.1Vrms typical full-scale single-ended analog output
- Delta-sigma DAC architecture with integrated line drivers
- DirectPath ground-centered analog output technology
- Integrated negative charge pump
- No conventional DC-blocking output capacitors required in supported configurations
- I2S digital audio interface support
- Left-justified and right-justified PCM format support
- TDM/DSP audio format support
- Accepts 16-bit, 20-bit, 24-bit, and 32-bit PCM audio data
- Selectable digital filter performance and latency
- Integrated high-performance audio PLL
- Audio clock generation from the bit-clock reference
- Digital volume control and soft mute functionality
- Register-selectable filtering, equalization, and dynamic range control for supported sample rates
- I2C and SPI software control interfaces
- Hardware configuration mode
- Automatic power-saving behavior when audio clocks are inactive
- 3.3V analog supply operation
- 1.8V or 3.3V digital supply operation
- Integrated power-on reset
- 28-pin TSSOP surface-mount package
Design Note: The PCM5122PWR is a line-output audio DAC rather than a high-power speaker amplifier. Its analog outputs should be connected to a compatible line input, buffer, headphone amplifier, or power amplifier as required by the application.
Package
The PCM5122PWR is supplied in a 28-pin TSSOP surface-mount package identified by the Texas Instruments package code PW.
- Package Type: TSSOP
- Package Code: PW
- Pin Count: 28
- Mounting Type: Surface Mount
- Approximate Overall Dimensions: 9.7mm × 6.4mm
- Nominal Lead Pitch: 0.65mm
- Ordering Part Number: PCM5122PWR
- Packaging Format: Tape and Reel
- Moisture Sensitivity Level: MSL 1
- Peak Reflow Temperature: 260°C
- Lead Finish: NiPdAu
- RoHS Compliance: Yes
- REACH Compliance: Yes
The TSSOP-28 package supports compact PCB layouts while retaining accessible leads for automated assembly and manufacturing inspection.
Audio PCB designers should pay particular attention to analog and digital supply decoupling, charge-pump capacitor placement, and separation of noisy digital return currents from sensitive analog output circuitry.
The recommended land pattern and exact mechanical dimensions should be obtained from the official Texas Instruments PW package drawing.
Pinout
The PCM5122PWR pinout contains analog audio outputs, digital audio inputs, charge-pump connections, clock inputs, power supply pins, and multifunction control pins.
The functions of several pins depend on whether the device operates in hardware, I2C, or SPI control mode. The following table describes the 28-pin PW package and its mode-dependent assignments.
| Pin | Signal | Function |
|---|---|---|
| 1 | CPVDD | 3.3V charge-pump power supply. |
| 2 | CAPP | Positive terminal of the charge-pump flying capacitor. |
| 3 | CPGND | Charge-pump ground connection. |
| 4 | CAPM | Negative terminal of the charge-pump flying capacitor. |
| 5 | VNEG | Negative charge-pump output rail requiring decoupling. |
| 6 | OUTL | Left-channel analog audio output. |
| 7 | OUTR | Right-channel analog audio output. |
| 8 | AVDD | 3.3V analog power supply. |
| 9 | AGND | Analog ground. |
| 10 | VCOM / DEMP | VCOM function in software modes; de-emphasis control in hardware mode. |
| 11 | SDA / MOSI / ATT2 | I2C data, SPI data input, or hardware attenuation control. |
| 12 | SCL / MC / ATT1 | I2C clock, SPI clock, or hardware attenuation control. |
| 13 | GPIO5 / ATT0 | Software-mode GPIO or hardware attenuation control. |
| 14 | GPIO4 / MAST | Software-mode GPIO or hardware master/slave selection. |
| 15 | GPIO3 / AGNS | Software-mode GPIO or hardware analog gain selection. |
| 16 | ADR2 / GPIO2 / DOUT | I2C address selection, SPI GPIO, or hardware-mode output. |
| 17 | MODE1 | Control interface mode selection. |
| 18 | MODE2 / MS | Control mode selection or SPI chip-select input. |
| 19 | GPIO6 / FLT | Software-mode GPIO or hardware digital-filter selection. |
| 20 | SCK | System clock input. |
| 21 | BCK | Digital audio bit clock. |
| 22 | DIN | Serial PCM audio data input. |
| 23 | LRCK | Digital audio word or channel clock. |
| 24 | ADR1 / MISO / FMT | I2C address selection, SPI readback, or hardware audio format selection. |
| 25 | XSMT | Soft-mute control input. |
| 26 | LDOO | Internal 1.8V logic supply regulator output and decoupling node. |
| 27 | DGND | Digital ground. |
| 28 | DVDD | 1.8V or 3.3V digital power supply. |
Important: The PCM5122 uses multifunction pins whose assignments change with the selected control interface. Pin functions must be verified against the manufacturer's hardware, I2C, or SPI mode pin configuration before schematic design.
For hardware mode, MODE1 and MODE2 are tied low. For I2C mode, MODE1 is low and MODE2 is high. SPI mode is selected using MODE1 high.
Specifications
| Parameter | Value |
|---|---|
| Part Number | PCM5122PWR |
| Manufacturer | Texas Instruments |
| Product Family | PCM512x |
| Device Type | Stereo Audio Digital-to-Analog Converter |
| DAC Architecture | Delta-Sigma with Integrated Line Driver |
| Number of DAC Channels | 2 |
| Audio Data Resolution | 16, 20, 24, or 32 Bits |
| Maximum Audio Data Resolution | 32 Bits |
| Minimum Sampling Frequency | 8kHz |
| Maximum Sampling Frequency | 384kHz |
| Typical Dynamic Range | 112dB |
| Typical Signal-to-Noise Ratio | 112dB |
| Typical THD+N | -93dB |
| Full-Scale Analog Output | 2.1Vrms Typical, Single-Ended |
| Analog Output Channels | OUTL and OUTR |
| Digital Audio Interfaces | I2S, Left-Justified, Right-Justified, TDM/DSP |
| Control Interfaces | Hardware, I2C, SPI |
| Analog Supply Voltage | 3.3V Nominal |
| Charge-Pump Supply Voltage | 3.3V Nominal |
| Digital Supply Voltage | 1.8V or 3.3V |
| Internal Negative Charge Pump | Yes |
| DirectPath Output Architecture | Yes |
| Integrated Audio PLL | Yes |
| Digital Volume Control | Yes |
| Soft Mute | Yes |
| Selectable Digital Filters | Yes |
| Fixed Audio Processing | Available at Supported Sample Rates |
| Operating Temperature Range | -25°C to +85°C |
| Package Type | TSSOP |
| Package Code | PW |
| Pin Count | 28 |
| Mounting Type | Surface Mount |
| Moisture Sensitivity Level | MSL 1 |
| RoHS Compliance | Yes |
| REACH Compliance | Yes |
| Product Status | ACTIVE |
Dynamic Range: The 112dB typical dynamic range describes the difference between the maximum reference signal and the effective noise floor under specified measurement conditions. Actual system performance depends on the analog power supply, PCB layout, external components, and downstream circuitry.
Sampling Rate: The PCM5122 supports sampling frequencies up to 384kHz for DAC functionality. Certain integrated audio processing features are available only at lower sampling rates, including functions specified for up to 48kHz.
Analog Output: The integrated line driver provides a ground-centered output of approximately 2.1Vrms at full scale. This output is intended for compatible line-level loads and may require buffering or amplification for other load types.
Clocking: The integrated PLL can derive the internal system clock from the audio bit clock, reducing the need for a separate master-clock signal in supported configurations.
Power Supply: AVDD and CPVDD require nominal 3.3V supplies. DVDD supports 1.8V or 3.3V operation. The recommended supply sequencing and decoupling requirements must be followed.
Layout Consideration: Keep analog outputs away from high-speed digital traces, place charge-pump capacitors close to the relevant pins, and follow the manufacturer's recommendations for grounding and power distribution.
Equivalent
When evaluating a PCM5122PWR equivalent, replacement, or alternative, engineers should compare dynamic range, output voltage, digital audio formats, supply requirements, package footprint, pin configuration, control interface, and audio processing features.
PCM5122PWR: The original Texas Instruments ordering number is the preferred option for existing production designs requiring exact device compatibility.
PCM5121PWR: A related PCM512x stereo DAC with a lower typical dynamic range of 106dB. It shares much of the family architecture, but audio performance and application requirements must be evaluated before substitution.
PCM5142: A related Texas Instruments stereo DAC offering additional programmable audio processing capabilities. It may be suitable for redesigned systems but should not be assumed to be a direct drop-in replacement.
TAD5212: A newer Texas Instruments high-performance stereo audio DAC offering a 120dB dynamic range and integrated headphone and line-driver capabilities. It uses a different package and pinout and is not a direct replacement.
TAD5242: A newer Texas Instruments hardware-controlled stereo DAC with a 120dB dynamic range. Its electrical interface, package, and feature set require a redesign assessment.
Other Stereo Audio DACs: Alternative products from Analog Devices, Cirrus Logic, ESS Technology, and Asahi Kasei Microdevices may offer similar audio conversion functions. However, interface, performance, supply, package, and software differences must be evaluated individually.
Replacement Recommendation: For an existing PCM5122PWR PCB, prioritize the original device. For a new design, compare PCM5121, PCM5142, TAD5212, and TAD5242 based on audio performance, system architecture, software requirements, and product lifecycle.
Manufacturer
Texas Instruments Incorporated is a semiconductor manufacturer specializing in analog integrated circuits, embedded processing, power management, and signal-chain technologies.
Its audio portfolio includes digital-to-analog converters, analog-to-digital converters, amplifiers, audio codecs, and supporting interface devices for consumer, industrial, and professional audio applications.
The PCM5122 belongs to the PCM512x stereo DAC family and provides a combination of high-resolution digital audio support, integrated line drivers, and flexible hardware or software configuration.
Official Product Page: PCM5122 – Texas Instruments
Official Ordering Information: PCM5122PWR Part Details
Official Datasheet: PCM512x Stereo Audio DAC Datasheet
Manufacturer Website: www.ti.com
For procurement, confirm the complete ordering number, original manufacturer, packaging format, date code, lot traceability, and applicable quality documentation.
Applications
Hi-Fi Audio Systems
High-resolution stereo digital-to-analog conversion for home audio receivers, standalone DAC units, and premium audio playback systems.
Home Theater Equipment
Line-level stereo audio conversion for multimedia receivers, sound systems, and compatible home theater components.
Headphone Audio Systems
High-quality analog audio source for external headphone amplifier stages and personal audio equipment.
Digital Media Players
PCM audio conversion for network audio players, streaming devices, and embedded multimedia platforms.
Professional Audio Equipment
Stereo line-output conversion for audio processing equipment, digital playback systems, and suitable studio peripherals.
Embedded Audio Designs
Integration with microcontrollers, application processors, DSPs, and FPGA-based audio systems using compatible PCM serial interfaces.
Application Note: In a typical embedded audio design, an MCU, DSP, or application processor sends serial PCM audio data to the PCM5122 through DIN, BCK, and LRCK. A separate system clock may be supplied through SCK, or the internal PLL can be configured to generate the required clock from the audio bit clock.
The OUTL and OUTR pins provide left and right analog audio signals that can be routed to external line-input equipment, active speakers, or audio amplifier stages.
For stable operation, install the recommended charge-pump capacitors, supply decoupling capacitors, and analog output filtering components. Configure the control interface and digital audio format to match the host system.
Audio Design Warning: The PCM5122PWR is not designed to directly drive high-power loudspeakers. Use an appropriate amplifier stage when the application requires significant output power or low-impedance speaker loads.
Disclaimer
This technical guide is provided for general product identification, engineering reference, and procurement support. All specifications, pin assignments, audio performance ratings, supply voltage requirements, package dimensions, control interface configurations, environmental compliance information, and product lifecycle status should be verified against the latest Texas Instruments documentation before design or purchase. Audio performance depends on the complete circuit design, operating conditions, external components, and measurement methods. Suggested alternatives are not guaranteed direct replacements. Product prices and availability may change without notice.

