Home > The Posts > Product Guides > SMAJ15CA TVS Diode | 15V 400W Bidirectional SMA Package
SMAJ15CA - Littelfuse Inc.

SMAJ15CA TVS Diode | 15V 400W Bidirectional SMA Package

Product Technical Guide SMAJ15CA 15V 400W Bidirectional TVS Diode Technical GuideBidirectional transient voltage suppressor featuring a 15V reverse stand-off voltage, 400W peak pulse power rating, 24.4…

In Stock 92,377 Available Inventory
Part No.:
SMAJ15CA
Manufacturer:
Littelfuse Inc.
Package:
DO-214AC, SMA
Datasheet:
SMAJ15CA.pdf
Description:
TVS DIODE 15VWM 24.4VC DO214AC
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

SMAJ15CA TVS Diode | 15V 400W Bidirectional SMA Package

Product Technical Guide
SMAJ15CA 15V 400W Bidirectional TVS Diode Technical Guide

Bidirectional transient voltage suppressor featuring a 15V reverse stand-off voltage, 400W peak pulse power rating, 24.4V maximum clamping voltage, and compact DO-214AC (SMA) surface-mount packaging.

Part NumberSMAJ15CA
ManufacturerMultiple Manufacturers
Device TypeBidirectional TVS Diode
01

Product Introduction

The SMAJ15CA is a bidirectional transient voltage suppressor (TVS) diode designed to protect sensitive electronic circuits against transient overvoltage events. It belongs to the SMAJ family of surface-mount TVS devices, which are widely used for surge suppression in power distribution, industrial control, communication interfaces, and general electronic equipment.

The SMAJ15CA provides a 15V reverse stand-off voltage and a breakdown voltage range of 16.7V to 18.5V at a test current of 1mA. Its bidirectional structure allows it to suppress transient voltages of either polarity, making it suitable for AC signal lines, bipolar interfaces, and appropriately designed DC protection circuits.

The device has a nominal peak pulse power rating of 400W for a 10/1000µs waveform, with a maximum clamping voltage of 24.4V at a peak pulse current of 16.4A, according to the Littelfuse SMAJ series specifications.

During normal operation, the TVS diode remains in its high-impedance state when the voltage across the device is below its specified working stand-off voltage. When a transient exceeds its breakdown region, the device conducts surge current and limits the voltage appearing across the protected circuit.

The SMAJ15CA is available from multiple semiconductor manufacturers. Although the basic electrical characteristics are often similar, manufacturer-specific ratings, qualification status, package details, and ordering information must be verified.

Its compact DO-214AC (SMA) package supports automated surface-mount assembly and makes the device practical for space-constrained electronic protection circuits.

02

Key Benefits

Bidirectional Protection

Suppresses positive and negative voltage transients, supporting protection of bipolar signals and suitable power lines.

400W Surge Capability

Provides 400W peak pulse power capability under the specified 10/1000µs waveform conditions.

Fast Transient Response

Avalanche-based transient suppression helps limit short-duration overvoltage events before they damage sensitive electronics.

Compact SMA Package

The DO-214AC surface-mount package supports compact PCB layouts and automated assembly processes.

03

Features

  • Bidirectional transient voltage suppressor diode
  • 15V reverse stand-off voltage
  • 16.7V minimum breakdown voltage
  • 18.5V maximum breakdown voltage
  • Breakdown voltage measured at 1mA test current
  • 24.4V maximum clamping voltage at the specified peak pulse current
  • 16.4A maximum peak pulse current for a 10/1000µs waveform
  • 400W peak pulse power rating at the specified waveform
  • Low reverse leakage current, typically specified with a 1µA maximum limit at the stand-off voltage for the referenced Littelfuse device
  • Fast avalanche-based transient suppression
  • Bidirectional voltage protection without a fixed cathode orientation
  • DO-214AC (SMA) surface-mount package
  • Suitable for automated pick-and-place and reflow assembly
  • Available from multiple manufacturers and distributors
  • Designed for transient overvoltage protection in electronic circuits

Design Note: The SMAJ15CA is a transient suppression device, not a continuous voltage regulator. It must not be used to absorb sustained overvoltage or fault energy beyond its thermal and electrical limits.

04

Package

The SMAJ15CA uses the DO-214AC (SMA) surface-mount package, a two-terminal molded semiconductor package commonly used for transient suppressors and rectifier diodes.

  • Package Type: DO-214AC
  • Package Name: SMA
  • Terminal Count: 2
  • Mounting Type: Surface Mount
  • Protection Configuration: Bidirectional
  • Typical Package Body Length: Approximately 4.5mm, manufacturer dependent
  • Typical Package Body Width: Approximately 2.6mm, manufacturer dependent
  • Packaging Options: Tape and reel, depending on manufacturer
  • Marking Code: XM for the referenced Littelfuse SMAJ15CA version
  • Moisture Sensitivity: Refer to the selected manufacturer's ordering documentation

The SMA package provides a practical balance between compact PCB area and transient power handling for general-purpose circuit protection.

When placing the SMAJ15CA on a PCB, designers should keep the connection to the protected line short and provide a low-inductance return path for transient current.

Excessive trace length can increase the voltage appearing at the protected circuit during a fast surge because of parasitic inductance.

PCB land patterns and soldering conditions should follow the selected manufacturer's latest package drawing.

05

Pinout

The SMAJ15CA pinout consists of two external terminals forming a bidirectional avalanche suppression structure.

Unlike a unidirectional TVS diode, the bidirectional SMAJ15CA does not require a fixed cathode-to-anode orientation for its normal transient suppression function.

Terminal Signal Function
1 TVS Terminal A Connects to one side of the protected circuit or transient current path.
2 TVS Terminal B Connects to the other side of the protected circuit or reference return path.
Terminal 1 – TVS AOne connection of the bidirectional transient suppression element.
Terminal 2 – TVS BThe opposite connection of the bidirectional suppression element.

Important: The two terminals are functionally interchangeable for the bidirectional SMAJ15CA. Physical terminal numbering, package markings, and the recommended PCB footprint should still be checked against the manufacturer's datasheet.

For DC power protection, the TVS diode is normally connected across the supply and return lines, with its stand-off voltage selected to remain above the maximum intended continuous operating voltage.

06

Specifications

Parameter Value
Part Number SMAJ15CA
Manufacturer Multiple Manufacturers
Reference Datasheet Littelfuse SMAJ Series
Device Type Transient Voltage Suppressor Diode
Protection Configuration Bidirectional
Reverse Stand-Off Voltage (VR) 15.0V
Minimum Breakdown Voltage (VBR) 16.7V
Maximum Breakdown Voltage (VBR) 18.5V
Breakdown Test Current (IT) 1mA
Maximum Clamping Voltage (VC) 24.4V
Maximum Peak Pulse Current (IPP) 16.4A
Peak Pulse Power Dissipation (PPPM) 400W
Pulse Waveform 10/1000µs
Maximum Reverse Leakage Current (IR) 1µA at VR
Number of Terminals 2
Package Type DO-214AC
Package Name SMA
Mounting Type Surface Mount
Marking Code (Littelfuse) XM
Operating Junction Temperature -55°C to +150°C for the referenced Littelfuse series
Storage Temperature -55°C to +150°C for the referenced Littelfuse series
Environmental Compliance Manufacturer and ordering option dependent
Product Status Verify by manufacturer

Reverse Stand-Off Voltage: The 15V stand-off rating defines the voltage at which the device is specified to remain in its nonconducting state within the rated leakage limits. It should not be confused with the avalanche breakdown or clamping voltage.

Breakdown Voltage: The specified breakdown range of 16.7V to 18.5V is measured at a test current of 1mA. Breakdown voltage is not the maximum voltage that the protected circuit will experience during a high-current surge.

Clamping Voltage: The maximum 24.4V clamping rating applies at the specified 16.4A peak pulse current. Actual clamping voltage varies with surge current and waveform.

Pulse Power Calculation: The nominal pulse power rating is consistent with approximately 24.4V × 16.4A = 400W under the specified test conditions.

Protection Coordination: The protected component must tolerate the actual transient voltage appearing across it, including the TVS clamping voltage and PCB parasitic effects.

Thermal Consideration: The 400W rating is a short-duration pulse capability. Continuous dissipation, repetitive surge performance, and temperature derating require separate verification.

07

Equivalent

When evaluating an SMAJ15CA equivalent, replacement, or alternative, engineers should compare the complete electrical specifications rather than relying only on the SMAJ15CA part-number designation.

Littelfuse SMAJ15CA: A reference implementation of the 15V bidirectional SMAJ-series TVS diode, with a 400W peak pulse power rating and DO-214AC package.

Bourns SMAJ15CA: A potential cross-manufacturer comparison candidate. Confirm the exact ordering suffix, pulse power rating, clamping voltage, mechanical dimensions, and applicable compliance documentation.

Vishay SMAJ15CA: A potential equivalent from another TVS diode manufacturer. Verify the manufacturer's electrical limits, package dimensions, and qualification status before substitution.

onsemi SMAJ15CA: A potential same-designation comparison candidate where available. Review the manufacturer's datasheet and ordering information for exact compatibility.

SMAJ15A: A related unidirectional 15V TVS diode. It is not functionally identical to SMAJ15CA because its suppression polarity and normal operating behavior differ.

SMBJ15CA: A higher-pulse-power bidirectional TVS family member commonly rated around 600W. Its SMB package is larger than the SMA package, so it is not a direct footprint-compatible replacement.

Replacement Recommendation: Prioritize a confirmed SMAJ15CA device from a qualified manufacturer. Validate stand-off voltage, breakdown range, clamping voltage, surge current, package footprint, marking, and application qualification before approval.

08

Manufacturer

The SMAJ15CA designation is used by multiple semiconductor manufacturers offering transient voltage suppressor products for circuit protection.

Littelfuse is a circuit protection and electronic components manufacturer offering TVS diodes, fuses, protection devices, and power-control components. Its SMAJ series provides a documented reference for the electrical specifications described in this guide.

Other manufacturers offer devices with similar SMAJ15CA designations, although their detailed specifications and ordering requirements may differ.

Reference Datasheet: Littelfuse SMAJ Series TVS Diodes Datasheet

Manufacturer Website: www.littelfuse.com

For procurement, confirm the manufacturer name, complete ordering part number, packaging quantity, lot traceability, product marking, and applicable environmental documentation.

09

Applications

Power Supply Protection

Transient overvoltage suppression for compatible low-voltage DC power input and distribution circuits.

Industrial Control Systems

Protection of control boards, power interfaces, and industrial electronic modules against short-duration voltage disturbances.

Communication Interfaces

Surge suppression for suitable communication and signal lines where the TVS capacitance and clamping characteristics are acceptable.

Embedded Electronics

Transient protection for embedded controllers, interface circuitry, and supporting power-management systems.

Power Adapters and Chargers

Protection of suitable adapter and charger circuits against transient overvoltage events within the device's rated capability.

Electronic Equipment

General-purpose transient suppression in electronic assemblies, instrumentation, and peripheral equipment.

Application Note: The SMAJ15CA should be selected based on the maximum normal operating voltage, required surge waveform, allowable clamping voltage, and thermal conditions. A nominal 12V supply may experience voltage excursions above its nominal value, so the actual operating range must be checked before choosing a 15V stand-off TVS.

For high-speed data lines, the capacitance of a general-purpose SMAJ TVS diode may be unsuitable. Low-capacitance ESD protection devices should be considered when signal integrity is critical.

10

Disclaimer

This technical guide is provided for general product identification, engineering reference, and procurement support. Electrical values are based on the referenced Littelfuse SMAJ-series documentation and should not be assumed identical across every manufacturer using the SMAJ15CA designation. Breakdown voltage, clamping voltage, surge ratings, leakage current, temperature limits, package dimensions, marking codes, qualification status, and product availability must be verified against the latest datasheet of the selected manufacturer. Suggested alternatives are not guaranteed direct replacements. Prices and availability may change without notice.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```