Home > The Posts > Product Guides > STM32F103VBT6 – STM32 32-Bit ARM Cortex-M3 Microcontroller | Datasheet, Pinout & Applications
STM32F103VBT6 - STMicroelectronics

STM32F103VBT6 – STM32 32-Bit ARM Cortex-M3 Microcontroller | Datasheet, Pinout & Applications

MICROCONTROLLER · TECHNICAL GUIDE STM32F103VBT6 – 72MHz ARM Cortex-M3 Microcontroller with 128KB FlashTechnical guide to the STMicroelectronics STM32F103VBT6, covering its 32-bit architecture, memory…

In Stock 1,235 Available Inventory
Part No.:
STM32F103VBT6
Manufacturer:
STMicroelectronics
Package:
100-LQFP
Datasheet:
STM32F103VBT6.pdf
Description:
IC MCU 32BIT 128KB FLASH 100LQFP
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

STM32F103VBT6 – STM32 32-Bit ARM Cortex-M3 Microcontroller | Datasheet, Pinout & Applications

MICROCONTROLLER · TECHNICAL GUIDE

STM32F103VBT6 – 72MHz ARM Cortex-M3 Microcontroller with 128KB Flash

Technical guide to the STMicroelectronics STM32F103VBT6, covering its 32-bit architecture, memory, LQFP-100 package, pinout, specifications, equivalent options, manufacturer information, and embedded applications.

STMicroelectronics Cortex-M3 · 72MHz 128KB Flash · LQFP-100

01. Product Introduction

The STM32F103VBT6 is a 32-bit microcontroller manufactured by STMicroelectronics. It belongs to the STM32F103 medium-density performance line and incorporates an ARM Cortex-M3 processor operating at frequencies up to 72MHz.

The device integrates 128KB of Flash program memory and 20KB of SRAM, providing resources for embedded firmware, real-time control, communication protocols, and peripheral management.

Its integrated peripherals include two 12-bit analog-to-digital converters, multiple timers, up to three USART interfaces, two SPI interfaces, two I2C interfaces, USB full-speed connectivity, and CAN 2.0B communication.

The STM32F103VBT6 operates from a 2.0V to 3.6V supply and is available in a 100-pin LQFP package. This combination makes it suitable for applications requiring numerous I/O connections and multiple communication interfaces.

Typical uses include industrial controllers, motor control equipment, instrumentation, communication modules, and embedded automation systems.

02. Key Benefits

  • 32-Bit Processing: ARM Cortex-M3 architecture supports efficient embedded control and interrupt processing.
  • 72MHz Performance: Provides processing capacity for real-time control and communication applications.
  • Integrated Memory: Combines 128KB Flash and 20KB SRAM in a single microcontroller.
  • Flexible Connectivity: Supports USART, SPI, I2C, CAN, and USB communication.
  • Analog Integration: Two 12-bit ADCs support sensor measurement and signal acquisition.
  • Motor Control Capability: Advanced PWM timer functions support motor-drive control algorithms.
  • Extensive I/O: Up to 80 programmable I/O lines are available in the 100-pin package.
  • Low-Power Modes: Sleep, Stop, and Standby modes help reduce power consumption.
  • Development Ecosystem: Compatible with STM32Cube development resources and standard ARM debugging tools.

03. Features

  • ARM Cortex-M3 32-bit RISC processor.
  • Maximum CPU clock frequency of 72MHz.
  • 128KB embedded Flash memory.
  • 20KB embedded SRAM.
  • 2.0V to 3.6V operating supply voltage.
  • Up to 80 fast general-purpose I/O pins.
  • Two 12-bit ADC modules with up to 16 external channels.
  • Integrated temperature sensor.
  • Three general-purpose 16-bit timers.
  • One advanced-control PWM timer.
  • Independent and window watchdog timers.
  • 24-bit SysTick timer.
  • Seven-channel DMA controller.
  • Three USART communication interfaces.
  • Two SPI interfaces.
  • Two I2C interfaces.
  • USB 2.0 full-speed device interface.
  • CAN 2.0B active controller.
  • SWD and JTAG debugging interfaces.
  • Internal 8MHz RC oscillator.
  • External crystal oscillator support.
  • Real-time clock and backup registers.
  • Sleep, Stop, and Standby operating modes.
  • 96-bit unique device identifier.
  • Industrial temperature operation from -40°C to +85°C.

04. Package

The STM32F103VBT6 is supplied in a 100-pin Low-Profile Quad Flat Package (LQFP), suitable for surface-mount PCB assembly.

Parameter Description
Part Number STM32F103VBT6
Manufacturer STMicroelectronics
Package Type LQFP-100
Pin Count 100
Package Body 14 × 14mm
Nominal Package Height 1.4mm
Mounting Type Surface Mount
Packaging Tray
Operating Temperature -40°C to +85°C
Environmental Compliance ST ECOPACK / RoHS

The LQFP-100 package provides access to the MCU's extensive I/O and peripheral functions while supporting conventional surface-mount assembly processes.

Ordering Note: STM32F103VBT6TR is the corresponding tape-and-reel ordering variant. Package drawings and assembly recommendations should be verified against the latest ST documentation.

05. Pinout

The STM32F103VBT6 uses a 100-pin LQFP configuration with programmable GPIO ports, analog inputs, communication interfaces, clock connections, power supplies, and debugging signals.

Signal Group Function Description
PA0–PA15 GPIO Port A General-purpose I/O with ADC, timer, serial, and alternate peripheral functions.
PB0–PB15 GPIO Port B Digital I/O with communication and timer-related alternate functions.
PC0–PC15 GPIO Port C Digital I/O, analog input, and oscillator-related functions.
PD0–PD15 GPIO Port D General-purpose I/O and multiplexed peripheral functions.
PE0–PE15 GPIO Port E Additional digital I/O and timer-related functions.
VDD / VSS Digital Power Digital supply voltage and ground connections.
VDDA / VSSA Analog Power Analog supply and ground for ADC circuitry.
VBAT Backup Supply Power input for RTC and backup-domain operation.
NRST Reset External active-low reset signal.
BOOT0 / BOOT1 Boot Configuration Selects the startup memory configuration.
OSC_IN / OSC_OUT Main Clock External high-speed oscillator connections.
OSC32_IN / OSC32_OUT RTC Clock Low-speed external oscillator connections.
PA13 / PA14 SWD Serial wire debugging signals.
PA11 / PA12 USB USB full-speed differential data connections.

Pin Multiplexing: GPIO pins can support multiple peripheral functions, but the functions cannot necessarily be used simultaneously. The required pin configuration depends on the selected peripheral remapping and firmware settings.

Design Note: This table summarizes signal groups rather than exact physical pin numbers. The official LQFP-100 pinout diagram must be consulted before PCB layout.

For reliable operation, connect all required power and ground pins, provide suitable decoupling capacitors, and configure the boot pins according to the intended startup mode.

06. Specifications

The following table summarizes the principal electrical and functional specifications of the STM32F103VBT6.

Parameter Value
Part Number STM32F103VBT6
Manufacturer STMicroelectronics
Product Family STM32F1
Core Architecture ARM Cortex-M3
CPU Data Width 32-bit
Maximum Frequency 72MHz
Flash Memory 128KB
SRAM 20KB
Supply Voltage 2.0V to 3.6V
Programmable I/O Up to 80
ADC Modules 2
ADC Resolution 12-bit
ADC External Channels Up to 16
General-Purpose Timers 3 × 16-bit
Advanced-Control Timer 1 × 16-bit
DMA Controller 7 channels
USART Interfaces 3
SPI Interfaces 2
I2C Interfaces 2
CAN Interface CAN 2.0B Active
USB Interface USB 2.0 Full-Speed Device
Debug Interface SWD / JTAG
Operating Temperature -40°C to +85°C
Package LQFP-100
Package Body 14 × 14mm
Mounting Type Surface Mount

Electrical Design Consideration: The device operates from a 2.0V to 3.6V supply. Although many digital I/O pins are 5V tolerant under specified conditions, analog inputs and other non-5V-tolerant pins must remain within their permitted voltage limits.

Official Datasheet: STM32F103x8 / STM32F103xB Datasheet – STMicroelectronics

07. Equivalent

When evaluating an STM32F103VBT6 equivalent, engineers should compare the processor architecture, memory capacity, package, pin assignments, operating temperature, peripheral availability, and firmware compatibility.

Part Number Relationship Replacement Considerations
STM32F103VBT6TR Same device and LQFP-100 package. Tape-and-reel ordering option; closest direct purchasing alternative.
STM32F103VBT7 Same STM32F103VB device family with extended temperature rating. Supports -40°C to +105°C; verify electrical and manufacturing requirements.
STM32F103V8T6 Related STM32F103 device with 64KB Flash. Lower Flash capacity; verify firmware size and memory requirements.
STM32F103RBT6 Related 128KB STM32F103 MCU. Uses LQFP-64 and fewer available I/O pins; requires PCB redesign.

Replacement Recommendation: STM32F103VBT6TR is the most straightforward ordering-code alternative. STM32F103VBT7 may be suitable where a wider operating temperature range is required, subject to engineering verification.

Devices with different package sizes or memory capacities should not be considered direct replacements without checking the PCB layout, firmware requirements, and peripheral assignments.

08. Manufacturer

STMicroelectronics is a global semiconductor manufacturer offering microcontrollers, analog and power management ICs, sensors, connectivity products, and embedded processing solutions.

The STM32F103VBT6 belongs to the STM32F1 mainstream microcontroller family, which is widely used in embedded control applications requiring ARM Cortex-M3 processing and integrated communication peripherals.

STMicroelectronics provides datasheets, reference manuals, application notes, development boards, and software development tools for STM32-based systems.

Development resources include STM32CubeIDE, STM32CubeMX configuration tools, hardware abstraction libraries, and ST-LINK programming and debugging solutions.

Manufacturer Product Page: STM32F103VB – STMicroelectronics

Product Lifecycle: STMicroelectronics identifies the STM32F103VB family as active and in volume production. Individual ordering-code availability should be verified when planning production purchases.

09. Applications

The STM32F103VBT6 is suitable for embedded electronic systems requiring real-time processing, analog measurement, digital control, and multiple communication interfaces.

  • Industrial Automation: Controls equipment, processes sensor data, and communicates with industrial peripherals.
  • Motor Control: Uses advanced timer and PWM functions for motor-drive applications with suitable external power circuitry.
  • Programmable Logic Controllers: Supports embedded logic and communication functions in compact control equipment.
  • Measurement Instruments: Uses integrated ADCs and timers for data acquisition and signal monitoring.
  • CAN Communication Systems: Provides CAN controller functionality for networked embedded devices using an external CAN transceiver.
  • USB Peripheral Devices: Enables USB full-speed device connectivity for compatible equipment.
  • HVAC Controllers: Supports temperature monitoring, control algorithms, and communication interfaces.
  • Printers and Scanners: Handles peripheral coordination, control functions, and communication tasks.
  • Security and Alarm Systems: Processes sensor inputs, manages control outputs, and supports communication modules.
  • Embedded Human-Machine Interfaces: Provides processing and peripheral control for suitable user-interface systems.

Application Example: In an industrial motor controller, the STM32F103VBT6 can acquire current and voltage measurements through its ADC modules, generate PWM control signals using the advanced timer, and exchange operating data with other controllers through a CAN network.

External gate drivers, power switches, protection circuits, and a CAN transceiver are required where appropriate. The microcontroller itself does not directly drive high-power motors or provide the complete physical CAN interface.

10. Disclaimer

This STM32F103VBT6 technical guide is provided for general product information, electronic component selection, and engineering reference purposes.

All electrical specifications, package dimensions, peripheral functions, and operating conditions should be verified against the latest official STMicroelectronics datasheet and reference manual before integrating the device into an electronic product.

Alternative components are listed for preliminary evaluation only. Similar processor architecture, memory capacity, or package dimensions do not guarantee complete electrical, pin-to-pin, or firmware compatibility.

Product lifecycle information, pricing, inventory availability, and ordering configurations may change without notice.

All manufacturer names, trademarks, and product identifiers remain the property of their respective owners.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```