Home > The Posts > Product Guides > STM32F407VET6 Microcontroller – Datasheet, Specifications, Pinout & Applications
STM32F407VET6 - STMicroelectronics

STM32F407VET6 Microcontroller – Datasheet, Specifications, Pinout & Applications

Product Technical Guide STM32F407VET6 168MHz Arm Cortex-M4 Microcontroller GuideA technical overview of the STMicroelectronics STM32F407VET6, covering its 32-bit Arm Cortex-M4 processor, 512KB Flash, 1…

In Stock 6,558 Available Inventory
Part No.:
STM32F407VET6
Manufacturer:
STMicroelectronics
Package:
100-LQFP
Datasheet:
STM32F407VET6.pdf
Description:
IC MCU 32BIT 512KB FLASH 100LQFP
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

STM32F407VET6 Microcontroller – Datasheet, Specifications, Pinout & Applications

Product Technical Guide
STM32F407VET6 168MHz Arm Cortex-M4 Microcontroller Guide

A technical overview of the STMicroelectronics STM32F407VET6, covering its 32-bit Arm Cortex-M4 processor, 512KB Flash, 192KB SRAM, LQFP-100 package, interfaces, specifications, replacement options, and applications.

Part NumberSTM32F407VET6
ManufacturerSTMicroelectronics
Device Type32-bit Microcontroller
01

Product Introduction

STM32F407VET6 is a high-performance 32-bit microcontroller manufactured by STMicroelectronics. It belongs to the STM32F4 series and features an Arm Cortex-M4 processor with a single-precision floating-point unit (FPU), digital signal processing (DSP) instructions, and a maximum CPU frequency of 168MHz.

The device integrates 512KB of embedded Flash memory and 192KB of SRAM, including 64KB of core-coupled memory (CCM). An additional 4KB of backup SRAM is available for applications requiring data retention within the supported backup power domain.

STM32F407VET6 supports multiple communication and control interfaces, including USART, UART, SPI, I2C, CAN, USB OTG, and an Ethernet MAC. It also includes analog peripherals, advanced timers, and a camera interface.

Operating from a 1.8V to 3.6V supply under the manufacturer's specified conditions, this microcontroller is designed for embedded applications requiring substantial processing capability, peripheral integration, and flexible system connectivity.

The device is supplied in a 100-pin LQFP package measuring approximately 14mm × 14mm, with an industrial ambient operating temperature range of -40°C to +85°C.

02

Key Benefits

168MHz Processing Performance

The Arm Cortex-M4 core with DSP instructions and hardware FPU supports demanding embedded control and signal-processing tasks.

Integrated Memory

512KB Flash and 192KB SRAM provide resources for embedded firmware, application data, and real-time processing.

Extensive Connectivity

USB, Ethernet, CAN, SPI, I2C, and serial interfaces enable communication with sensors, controllers, and external equipment.

Flexible Peripheral Integration

ADCs, DACs, timers, DMA, and GPIO functions reduce the need for separate control and interface components.

03

Features

  • Arm Cortex-M4 32-bit processor with single-precision FPU
  • Maximum CPU frequency of 168MHz
  • DSP instruction support and memory protection unit (MPU)
  • Adaptive Real-Time Accelerator (ART Accelerator)
  • 512KB embedded Flash memory
  • 192KB SRAM, including 64KB CCM RAM
  • Additional 4KB backup SRAM
  • Three 12-bit analog-to-digital converters
  • Two 12-bit digital-to-analog converter channels
  • Up to 82 GPIOs, subject to pin multiplexing and package limitations
  • Three SPI interfaces and three I2C interfaces
  • Four USART and two UART interfaces
  • Two CAN 2.0 controllers
  • USB OTG Full-Speed and High-Speed controller support
  • 10/100 Ethernet MAC with IEEE 1588 support
  • SDIO interface and digital camera interface
  • Flexible static memory controller (FSMC), subject to package limitations
  • General-purpose, advanced-control, and watchdog timers
  • DMA controllers for efficient data transfers
  • Hardware random number generator
  • Real-time clock and low-power operating modes
  • Serial Wire Debug and JTAG debugging interfaces
  • 1.8V to 3.6V application supply under specified conditions
  • -40°C to +85°C ambient operating temperature
  • 100-pin LQFP surface-mount package
04

Package

Package Type: Low-Profile Quad Flat Package (LQFP)

Pin Count: 100

Nominal Body Dimensions: 14mm × 14mm

Nominal Package Height: 1.4mm

Pin Pitch: 0.5mm

Mounting Type: Surface Mount

Temperature Grade: Industrial

Operating Temperature: -40°C to +85°C

Packaging for STM32F407VET6: Tray

Packaging for STM32F407VET6TR: Tape and Reel

The LQFP-100 package provides a practical balance between GPIO availability, peripheral connectivity, and PCB assembly requirements.

For PCB layout, designers should use the latest STMicroelectronics package drawing and recommended land pattern. Mechanical tolerances, lead dimensions, and soldering requirements must be verified before production.

05

Pinout

STM32F407VET6 uses a 100-pin LQFP configuration with multiplexed GPIO, analog, communication, clock, debug, and power connections.

PA0–PA15GPIO Port A, with alternate peripheral and analog functions
PB0–PB15GPIO Port B, with alternate communication and timer functions
PC0–PC15GPIO Port C, including analog and digital interface functions
PD0–PD15GPIO Port D, including communication and external-memory functions
PE0–PE15GPIO Port E, including timer and external-memory functions
PH0 / PH1Oscillator-related pins and GPIO functions, subject to configuration
VDD / VSSDigital power supply and ground connections
VDDA / VSSAAnalog power supply and ground connections
VBATBackup-domain power supply input
VCAP_1 / VCAP_2Internal regulator capacitor connections
NRSTExternal reset input
BOOT0Boot mode selection input
SWDIO / SWCLKSerial Wire Debug signals on multiplexed GPIO pins
OSC_IN / OSC_OUTExternal high-speed oscillator connections
USB / CAN / EthernetCommunication functions assigned through alternate-function pin multiplexing
ADC / DACAnalog input and output functions on supported pins

The above entries describe signal groups rather than a complete pin-number map. Multiple peripherals may share the same physical pin through alternate-function multiplexing.

Important: Consult the STM32F407VET6 datasheet and STM32F4 alternate-function tables for exact pin numbers, electrical limitations, and peripheral availability before PCB design.

06

Specifications

Parameter Value
Part Number STM32F407VET6
Manufacturer STMicroelectronics
Product Series STM32F4
Product Category 32-bit Microcontroller
Processor Core Arm Cortex-M4 with FPU
Maximum CPU Frequency 168MHz
Flash Memory 512KB
SRAM 192KB, including 64KB CCM
Backup SRAM 4KB
Supply Voltage 1.8V to 3.6V, subject to operating conditions
GPIO Up to 82
ADC 3 × 12-bit
DAC 2 × 12-bit channels
SPI 3
I2C 3
USART 4
UART 2
CAN 2 × CAN 2.0
USB USB OTG FS and HS controller support
Ethernet 10/100 Ethernet MAC
SDIO Supported
Camera Interface DCMI
Timers Up to 17, including watchdog timers
DMA Supported
Debug Interfaces SWD / JTAG
Operating Temperature -40°C to +85°C
Package LQFP-100
Package Body 14mm × 14mm
Mounting Surface Mount
Product Status Active, according to ST product information

Technical Note: Certain peripheral functions require additional external components. For example, Ethernet communication requires a suitable external PHY, while USB High-Speed operation requires the appropriate interface configuration and external PHY for high-speed signaling.

07

Equivalent

When evaluating an STM32F407VET6 equivalent, replacement, or alternative, engineers should compare Flash memory, SRAM, package pinout, peripheral availability, operating voltage, temperature grade, boot configuration, and firmware compatibility.

STM32F407VET6TR: The tape-and-reel ordering variant of STM32F407VET6. It retains the same device configuration and package, with different shipment packaging.

STM32F407VGT6: A related STM32F407 device with 1MB Flash memory and the same LQFP-100 package class. It may be evaluated for applications requiring additional program memory, but device-level and firmware compatibility should be confirmed.

STM32F407ZET6: A related STM32F407 device with 512KB Flash and a larger LQFP-144 package. It is not a direct PCB footprint replacement for the LQFP-100 STM32F407VET6.

STM32F405VET6: A related STM32F4 microcontroller with a similar processor and memory configuration. Peripheral differences, particularly Ethernet and camera interface support, mean it should not be treated as an unconditional replacement.

Replacement Recommendation: For existing PCB designs, prioritize the exact STM32F407VET6 ordering number or its approved packaging variant. Any alternative MCU requires a detailed datasheet comparison and application-level validation.

08

Manufacturer

STMicroelectronics is a global semiconductor manufacturer offering microcontrollers, analog devices, power management components, sensors, and connectivity solutions.

The STM32F407VET6 belongs to ST's STM32F4 high-performance microcontroller portfolio, combining Arm Cortex-M4 processing, digital signal processing capabilities, and integrated peripherals.

ST provides technical documentation, reference manuals, software development tools, hardware development boards, and the STM32Cube software ecosystem to support development.

Official Product Page: STM32F407VE – STMicroelectronics

Official Datasheet: STM32F405xx / STM32F407xx Datasheet (PDF)

09

Applications

Industrial Automation

Embedded control, sensor processing, communication, and monitoring functions in industrial equipment.

Motor Control Systems

Timer, PWM, ADC, and DSP resources support suitable motor-control and motion-control applications.

Networking and Communication

Ethernet MAC, CAN, USB, and serial interfaces enable connected controllers and communication equipment.

Measurement Instruments

Integrated ADCs, DACs, timers, and processing resources support data acquisition and signal-processing designs.

Human-Machine Interfaces

Processing performance and external-memory interface capabilities support graphical displays and embedded user interfaces.

Embedded Control Platforms

Flexible peripherals and firmware resources support robotics, programmable controllers, and custom electronic products.

10

Disclaimer

The information on this page is intended for product identification and general technical reference. Electrical characteristics, peripheral availability, pin assignments, package dimensions, operating conditions, and product lifecycle status should be verified against the latest STMicroelectronics documentation before design, procurement, or component replacement. Product availability, pricing, and packaging options are subject to change. Any alternative device requires independent electrical, mechanical, and firmware compatibility validation.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```