Electronic Component Technical Guide
STM32F407VGT6 – High-Performance ARM Cortex-M4 32-Bit Microcontroller
The STM32F407VGT6 is a high-performance 32-bit microcontroller from STMicroelectronics, based on the ARM Cortex-M4 core with DSP instructions and a floating-point unit (FPU). Operating at up to 168MHz, it integrates 1MB Flash memory, up to 192KB SRAM, advanced communication interfaces and extensive peripheral functions for demanding embedded applications.
01. Product Introduction
The STM32F407VGT6 is a high-performance 32-bit microcontroller developed by STMicroelectronics. It belongs to the STM32F4 series and is based on the ARM Cortex-M4 RISC processor with an integrated floating-point unit (FPU) and digital signal processing (DSP) instructions.
Operating at a maximum CPU frequency of 168MHz, the STM32F407VGT6 provides substantial processing capability for embedded applications requiring real-time control, data processing and multiple communication interfaces.
The device integrates 1MB of Flash memory and up to 192KB of SRAM, including 64KB of core-coupled memory (CCM) data RAM. It also supports an optional 4KB backup SRAM for suitable low-power backup applications.
One of the major advantages of the STM32F407VGT6 is its extensive peripheral integration. It includes multiple 12-bit ADCs, two DACs, advanced timers, DMA controllers, USB connectivity, Ethernet MAC, CAN interfaces, SPI, I2C and USART communication interfaces.
The combination of processing performance, memory capacity and peripheral flexibility makes this MCU suitable for industrial automation, motor control, digital signal processing, communication equipment and embedded control systems.
The STM32F407VGT6 is supplied in a 100-pin LQFP package, offering a wide range of GPIO and peripheral connections for complex electronic designs.
Product Overview:
- Part Number: STM32F407VGT6
- Manufacturer: STMicroelectronics
- Product Series: STM32F4
- Core Processor: ARM Cortex-M4
- Core Architecture: 32-bit RISC
- Maximum CPU Frequency: 168MHz
- Flash Memory: 1MB
- SRAM: Up to 192KB
- Backup SRAM: Up to 4KB
- Floating-Point Unit: Single-Precision FPU
- DSP Instructions: Supported
- ADC: 3 × 12-Bit
- DAC: 2 × 12-Bit
- Communication: USB, Ethernet, CAN, SPI, I2C, USART
- Package: LQFP-100
- Operating Temperature: -40°C to +85°C
02. Key Benefits
High-Speed Processing Performance
The ARM Cortex-M4 core operates at up to 168MHz and delivers up to 210 DMIPS under specified conditions. This processing capability supports demanding real-time embedded applications.
Integrated Floating-Point Unit
The single-precision FPU accelerates floating-point mathematical operations, reducing software processing overhead in applications involving calculations, control algorithms and signal processing.
Advanced DSP Capabilities
Integrated DSP instructions support efficient mathematical operations, including digital filtering, signal analysis and numerical processing.
Large On-Chip Memory
With 1MB Flash and up to 192KB SRAM, the STM32F407VGT6 provides sufficient internal memory for many embedded applications without requiring external program memory.
Extensive Connectivity
USB, Ethernet MAC, CAN, SPI, I2C and USART interfaces allow the microcontroller to communicate with a wide range of external devices and electronic systems.
Integrated Analog Peripherals
Three 12-bit ADCs and two 12-bit DACs support analog measurement, signal generation and control applications.
Flexible Embedded Design
The 100-pin LQFP package provides numerous GPIO and peripheral connections, making the device suitable for designs requiring multiple hardware interfaces.
03. Features
- ARM Cortex-M4 32-bit RISC processor.
- Maximum operating frequency of 168MHz.
- Single-precision floating-point unit (FPU).
- Integrated digital signal processing instructions.
- Memory Protection Unit (MPU).
- Up to 1MB embedded Flash memory.
- Up to 192KB SRAM, including 64KB CCM data RAM.
- Optional 4KB backup SRAM.
- 512 bytes of OTP memory.
- Three 12-bit ADCs with up to 24 external channels.
- Two 12-bit DAC channels.
- 16-stream DMA controller with FIFO and burst support.
- Up to 17 timers.
- Advanced PWM and motor-control timer functions.
- Up to 3 I2C interfaces.
- Up to 4 USARTs and 2 UARTs.
- Up to 3 SPI interfaces.
- Two CAN 2.0B interfaces.
- Two I2S interfaces with audio PLL support.
- USB 2.0 Full-Speed and High-Speed OTG capabilities.
- 10/100 Ethernet MAC with IEEE 1588v2 hardware support.
- SDIO interface.
- Flexible Static Memory Controller (FSMC).
- Parallel camera interface.
- True Random Number Generator (RNG).
- CRC calculation unit.
- Real-Time Clock (RTC).
- Sleep, Stop and Standby power-saving modes.
- SWD and JTAG debugging interfaces.
ART Accelerator Technology
The integrated Adaptive Real-Time (ART) Accelerator improves Flash memory access performance and enables zero-wait-state execution from Flash under supported operating conditions.
Advanced Communication Interfaces
The integrated connectivity options make the STM32F407VGT6 suitable for networked embedded devices, industrial controllers and multimedia systems.
Peripheral Integration
By combining timers, ADCs, DACs, DMA and communication interfaces, the device can reduce the need for additional external controllers in many designs.
04. Package
The STM32F407VGT6 is supplied in a 100-pin Low-Profile Quad Flat Package (LQFP-100), designed for surface-mount PCB assembly.
| Package Attribute | Description |
|---|---|
| Package Type | LQFP |
| Pin Count | 100 |
| Package Dimensions | 14mm × 14mm |
| Package Height | Approximately 1.4mm |
| Mounting Type | Surface Mount |
| Lead Configuration | Gull-Wing Leads |
| Package Family | STM32F407VG |
| Temperature Grade | Industrial |
| RoHS Compliance | ECOPACK2 |
The LQFP-100 package provides a practical balance between pin availability and PCB footprint for complex embedded designs.
Its 100-pin configuration supports multiple GPIO ports, power connections, analog interfaces, clock signals and communication peripherals.
Engineers should pay attention to PCB footprint accuracy, soldering conditions, power decoupling and thermal considerations during hardware development.
The exact mechanical dimensions and land pattern should be verified using the official STMicroelectronics package drawing.
05. Pinout
The STM32F407VGT6 features a 100-pin LQFP package with multiple GPIO ports and dedicated power, clock, reset and analog connections.
Its GPIO architecture provides flexible alternate-function mapping, allowing pins to support different peripheral functions depending on the configuration.
Main Pin Groups:
| Pin Group | Function |
|---|---|
| PA0–PA15 | GPIO, ADC, timers, SPI, USART and other alternate functions |
| PB0–PB15 | GPIO, timers, I2C, SPI, USART and communication interfaces |
| PC0–PC15 | GPIO, ADC, SDIO, oscillator and peripheral functions |
| PD0–PD15 | GPIO, FSMC, USART, CAN and other alternate functions |
| PE0–PE15 | GPIO, FSMC, timers and peripheral functions |
| PH0 / PH1 | External high-speed oscillator connections |
| NRST | Hardware reset input |
| BOOT0 | Boot configuration input |
| VDD / VSS | Digital power and ground |
| VDDA / VSSA | Analog power and ground |
| VBAT | Backup power supply |
| VREF+ | ADC reference voltage input |
| VCAP1 / VCAP2 | Internal regulator capacitor connections |
Important Peripheral Pin Functions:
- ADC: Analog input channels are distributed across several GPIO ports.
- SPI: SPI signals can be mapped to supported alternate-function pins.
- I2C: Dedicated alternate-function pins support serial communication.
- USART: TX and RX signals are available through configurable GPIO functions.
- CAN: CAN transmit and receive signals use designated alternate-function pins.
- USB: USB OTG signals use dedicated alternate-function connections.
- Ethernet: MII and RMII interfaces use dedicated combinations of GPIO pins.
Power Supply and Reset Considerations:
The STM32F407VGT6 operates with an application supply voltage from 1.8V to 3.6V. All required supply and ground pins must be connected correctly.
The VCAP pins require the external capacitors specified in the manufacturer's reference design. They must not be used as general-purpose power outputs.
BOOT0 configuration determines the boot selection behavior, while NRST provides hardware reset control.
Official Pinout Reference:
Download STM32F407VG Official Datasheet and Pin Configuration
The exact 1-to-100 pin numbering, alternate functions and electrical characteristics should be checked against the official LQFP-100 pinout diagram. GPIO names alone do not establish the physical package pin number.
06. Specifications
The following table summarizes the main electrical and functional characteristics of the STM32F407VGT6.
| Parameter | Specification |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM32F407VGT6 |
| Product Series | STM32F4 |
| Core Processor | ARM Cortex-M4 |
| Core Architecture | 32-Bit RISC |
| Maximum CPU Frequency | 168MHz |
| Performance | Up to 210 DMIPS |
| Floating-Point Unit | Single-Precision FPU |
| DSP Support | Yes |
| Flash Memory | 1MB |
| SRAM | Up to 192KB |
| CCM Data RAM | 64KB (Included in SRAM) |
| Backup SRAM | Up to 4KB |
| OTP Memory | 512 Bytes |
| ADC | 3 × 12-Bit |
| DAC | 2 × 12-Bit |
| ADC Conversion Speed | Up to 2.4MSPS per ADC |
| Timers | Up to 17 |
| DMA | 16-Stream DMA Controller |
| I2C | Up to 3 |
| USART | Up to 4 |
| UART | Up to 2 |
| SPI | Up to 3 |
| CAN | 2 × CAN 2.0B |
| I2S | 2 |
| USB | USB 2.0 FS / HS OTG |
| Ethernet | 10/100Mbps MAC |
| SDIO | Supported |
| Camera Interface | Parallel Camera Interface |
| Operating Supply Voltage | 1.8V to 3.6V |
| Operating Temperature | -40°C to +85°C |
| Package | LQFP-100 |
| Package Dimensions | 14mm × 14mm |
| Marketing Status | Active |
CPU Performance
The ARM Cortex-M4 core supports DSP instructions and single-precision floating-point calculations. Combined with the 168MHz clock frequency and ART Accelerator, it is suitable for real-time control and numerical processing.
Memory Architecture
The integrated 1MB Flash memory stores firmware and application code. The SRAM architecture includes general-purpose data memory and 64KB of CCM RAM for applications requiring fast processor access.
Analog Processing
Three 12-bit ADCs support multi-channel analog measurement. Two 12-bit DACs provide analog signal generation capabilities for compatible applications.
Communication Performance
The device integrates multiple communication interfaces, including USB OTG, CAN, Ethernet MAC, SPI, I2C and USART. USB High-Speed operation requires an external ULPI PHY, while the on-chip USB PHY supports Full-Speed operation.
The Ethernet MAC also requires an external physical-layer transceiver.
Official Datasheet:
07. Equivalent
When searching for an STM32F407VGT6 equivalent or replacement, engineers should consider processor architecture, Flash capacity, SRAM size, package configuration, pin assignments and peripheral compatibility.
The STM32F407 family contains several related devices. However, sharing the same processor family does not automatically guarantee pin-to-pin compatibility.
| Part Number | Relationship | Replacement Consideration |
|---|---|---|
| STM32F407VGT6 | Original device | 1MB Flash, LQFP-100 |
| STM32F407VGT6TR | Same device with tape-and-reel packaging | Same core device; verify ordering and packaging requirements |
| STM32F407VGT7 | Related device with a different temperature grade | Verify operating temperature requirements |
| STM32F407VET6 | Related STM32F407 variant | Different Flash capacity; verify memory requirements |
| STM32F407ZGT6 | Related STM32F407 variant | Different package and pin count |
| STM32F405VGT6 | Related Cortex-M4 MCU | Peripheral differences must be evaluated |
How to Select an STM32F407VGT6 Replacement
- Confirm the ARM Cortex-M4 processor requirements.
- Verify maximum CPU frequency and system clock configuration.
- Check Flash memory and SRAM capacity.
- Compare the LQFP-100 physical footprint and pin assignments.
- Verify ADC, DAC and timer requirements.
- Check USB, Ethernet, CAN and serial communication peripherals.
- Confirm operating voltage and temperature range.
- Review boot configuration and debugging requirements.
- Validate firmware and peripheral compatibility.
Important Replacement Notice:
STM32F407VGT6 alternatives should not be treated as unconditional pin-to-pin replacements. Different Flash capacities, package sizes, peripheral implementations and temperature grades may require hardware or firmware modifications.
For existing PCB designs, the STM32F407VGT6TR is the same device in a different packaging format and is generally the closest ordering alternative.
08. Manufacturer
The STM32F407VGT6 is manufactured by STMicroelectronics, a global semiconductor company specializing in microcontrollers, analog devices, power management, sensors and embedded processing technologies.
STMicroelectronics developed the STM32 family to provide scalable microcontroller solutions for industrial, automotive, consumer and embedded applications.
The STM32F4 series is designed for applications requiring higher processing performance, extensive peripheral integration and real-time control capabilities.
The STM32F407VGT6 combines the ARM Cortex-M4 core with integrated DSP, FPU, memory and communication peripherals in a compact LQFP package.
Manufacturer Information:
- Manufacturer: STMicroelectronics
- Part Number: STM32F407VGT6
- Product Family: STM32F4 Series
- Product Category: Microcontrollers
- Core: ARM Cortex-M4
- Maximum Frequency: 168MHz
- Flash Memory: 1MB
- Package: LQFP-100
- Marketing Status: Active / In Volume Production
- Official Website: www.st.com
- Product Page: STM32F407VG Product Information
- Datasheet: STM32F407VG Datasheet PDF
STMicroelectronics provides technical documentation, development tools, software libraries and hardware design resources to support STM32-based product development.
For procurement, buyers should verify the complete ordering code, package marking, manufacturer traceability, packaging format and applicable quality documentation.
09. Applications
The STM32F407VGT6 is designed for embedded applications that require strong processing performance, real-time control, communication flexibility and integrated analog peripherals.
1. Industrial Automation
The Cortex-M4 core, integrated timers and communication interfaces make the STM32F407VGT6 suitable for industrial control equipment, monitoring systems and embedded automation platforms.
2. Motor Control Systems
Advanced timer functions, PWM generation and ADC peripherals support motor-control applications, including feedback measurement and real-time control algorithms.
3. Audio Processing Equipment
The integrated DSP instructions, FPU and I2S interfaces make the device suitable for audio processing, digital signal handling and embedded multimedia systems.
4. Network Communication Equipment
The integrated Ethernet MAC, USB OTG and CAN interfaces support networked embedded products and industrial communication equipment. External PHY components are required where specified by the interface.
5. Consumer Electronics
The STM32F407VGT6 can be used in electronic control panels, multimedia devices, smart equipment and products requiring multiple peripheral connections.
6. Measurement and Instrumentation
Three 12-bit ADCs and two DACs support analog measurement, signal generation and data acquisition functions in embedded instruments.
7. Embedded Control Systems
The MCU provides sufficient processing and memory resources for complex embedded firmware, peripheral management and real-time control applications.
8. Communication Gateways
USB, Ethernet, CAN, SPI, I2C and USART interfaces make the device suitable for selected communication gateway and protocol-conversion applications.
9. Digital Signal Processing
DSP instructions and floating-point calculations support digital filtering, numerical analysis and signal-processing applications.
10. Camera and Display Systems
The parallel camera interface, LCD-related peripheral capabilities and external memory controller support selected embedded imaging and display applications.
Application Design Recommendations:
- Verify the power supply requirements and decoupling network.
- Use the recommended external capacitors on VCAP pins.
- Configure clock sources and PLL settings correctly.
- Check GPIO alternate-function assignments.
- Provide suitable reset and boot configuration circuits.
- Follow the manufacturer's ADC and analog layout recommendations.
- Use an external Ethernet PHY when implementing Ethernet connectivity.
- Use an external ULPI PHY for USB High-Speed operation.
- Validate memory usage and real-time performance.
- Follow STMicroelectronics hardware design and PCB layout guidelines.
The STM32F407VGT6 is particularly suitable for embedded products requiring a combination of high-speed processing, integrated communication interfaces and flexible peripheral control.
10. Disclaimer
This STM32F407VGT6 technical guide is provided for general engineering reference, electronic component identification and product selection.
Technical characteristics and device capabilities are based on publicly available STMicroelectronics product information and technical documentation.
Actual system performance depends on clock configuration, firmware implementation, power supply design, PCB layout, external components and operating conditions.
Peripheral availability and pin assignments must be checked against the exact STM32F407VGT6 package and official datasheet.
Potential equivalent or replacement microcontrollers must be independently evaluated for electrical, mechanical, memory and functional compatibility.
Product status, ordering information, pricing and inventory availability may change without notice. Buyers should confirm the latest information directly with STMicroelectronics or authorized distributors.
Official Technical Reference:
STMicroelectronics STM32F407VG Official Datasheet
Editorial Note: This document is an independent technical overview intended to support electronic component research and engineering decisions. It is not an official STMicroelectronics publication or a guarantee of component availability, interchangeability or suitability for a specific application.

