Home > The Posts > Product Guides > TLC27L2CDR Datasheet, Pinout, Equivalent & Applications
TLC27L2CDR - Texas Instruments

TLC27L2CDR Datasheet, Pinout, Equivalent & Applications

Analog ICs & Operational Amplifiers TLC27L2CDR Dual Low-Power CMOS Operational AmplifierThe TLC27L2CDR is a dual low-power CMOS operational amplifier from Texas Instruments, featuring LinCMOS technolog…

In Stock 4,165 Available Inventory
Part No.:
TLC27L2CDR
Manufacturer:
Texas Instruments
Package:
8-SOIC (0.154", 3.90mm Width)
Datasheet:
TLC27L2CDR.pdf
Description:
IC CMOS 2 CIRCUIT 8SOIC
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

TLC27L2CDR Datasheet, Pinout, Equivalent & Applications

Analog ICs & Operational Amplifiers

TLC27L2CDR Dual Low-Power CMOS Operational Amplifier

The TLC27L2CDR is a dual low-power CMOS operational amplifier from Texas Instruments, featuring LinCMOS technology, high input impedance, extremely low input bias current, and low power consumption. With a 3V to 16V supply range, two independent amplifier channels, and an 8-pin SOIC package, it is designed for precision signal conditioning, sensor interfaces, active filters, and battery-powered analog systems.

Dual CMOS Op Amp 8-Pin SOIC 3V–16V Supply

1. Product Introduction

The TLC27L2CDR is a dual CMOS operational amplifier manufactured by Texas Instruments (TI). It belongs to the TLC27L2 LinCMOS family and integrates two independent operational amplifier channels in a single 8-pin surface-mount package.

The device is designed for analog circuits that require low power consumption, high input impedance, low input bias current, and stable signal amplification. Its CMOS architecture helps reduce input loading and makes it suitable for applications involving high-impedance sensors and low-level analog signals.

One of the main characteristics of the TLC27L2 family is its LinCMOS technology. This silicon-gate CMOS process combines high input impedance with low power requirements and stable input offset-voltage characteristics. It allows engineers to design analog signal-processing circuits without the relatively high input bias currents commonly associated with traditional bipolar operational amplifiers.

The TLC27L2CDR contains two independent amplifiers, allowing one device to perform multiple analog functions. For example, one channel can amplify a sensor signal while the second channel performs filtering, buffering, or signal conditioning.

The device supports a total supply voltage ranging from 3V to 16V for the C-grade temperature range of 0°C to +70°C. It can operate from a single supply or a split supply, providing flexibility in analog circuit design.

Its input common-mode voltage range extends below the negative supply rail, and its output voltage range includes the negative rail. These characteristics can simplify single-supply signal-conditioning circuits where input and output signals operate close to ground.

The TLC27L2CDR features an extremely low typical input bias current of approximately 0.6pA under specified conditions. This makes it useful for circuits involving high-value resistors, capacitive sensors, and other high-impedance signal sources.

According to Texas Instruments, the TLC27L2 family also provides low input offset-voltage drift and a typical gain-bandwidth product of approximately 85kHz in its product parametric data. Its typical slew rate is 0.03V/µs, making it more appropriate for low-frequency analog processing than high-speed signal amplification.

The TLC27L2CDR is supplied in an 8-pin SOIC package, identified by the D package designation. Its combination of dual-channel functionality, low operating power, and high input impedance makes it suitable for industrial instrumentation, battery-powered equipment, sensor interfaces, and general-purpose analog electronics.

2. Key Benefits

  • Dual Amplifier Integration: Integrates two independent operational amplifier channels in one IC, reducing component count and PCB space.
  • Ultra-Low Input Bias Current: Typical input bias current of approximately 0.6pA helps minimize loading on high-impedance signal sources.
  • Low Power Consumption: Typical supply current is approximately 10µA per channel, supporting energy-efficient analog designs.
  • High Input Impedance: Typical input impedance of approximately 10¹²Ω helps preserve weak sensor signals.
  • Flexible Supply Operation: Supports single-supply and dual-supply configurations.
  • Wide Supply Voltage Range: Operates from 3V to 16V within the specified C-grade temperature range.
  • Low Input Offset Drift: Typical input offset-voltage drift of approximately 0.1µV per month, including the first 30 days, supports stable analog performance.
  • Negative-Rail Input Capability: The common-mode input range extends below the negative supply rail for C-grade devices.
  • Low-Power CMOS Technology: LinCMOS architecture provides high input impedance with low static power requirements.
  • Compact SOIC Package: Provides two amplifier channels in a compact 8-pin surface-mount package.

3. Features

The TLC27L2CDR combines low-power CMOS technology, high input impedance, and dual-channel analog amplification for general-purpose signal-processing applications.

Core Amplifier Features

  • Two independent operational amplifier channels.
  • CMOS operational amplifier architecture.
  • Texas Instruments LinCMOS technology.
  • High open-loop voltage gain.
  • Typical gain-bandwidth product of approximately 85kHz.
  • Typical slew rate of 0.03V/µs.
  • Typical input offset-voltage drift of approximately 0.1µV/month.

Low-Power and Input Characteristics

  • Typical supply current of approximately 10µA per channel.
  • Typical input bias current of approximately 0.6pA.
  • High typical input impedance of approximately 10¹²Ω.
  • Low input loading for high-impedance sensors.
  • Low-power operation for portable electronic equipment.
  • Suitable for low-frequency analog signal processing.

Supply and Output Characteristics

  • Total supply voltage range of 3V to 16V for the C-grade temperature range.
  • Single-supply operation supported.
  • Dual-supply operation supported.
  • Input common-mode voltage range extends below the negative rail.
  • Output voltage range includes the negative supply rail.
  • Designed-in latch-up immunity.
  • Integrated ESD-protection circuitry.

Precision and Stability

The TLC27L2 family is designed to provide stable input offset-voltage characteristics over time. Its silicon-gate CMOS process helps reduce offset-voltage drift compared with conventional metal-gate CMOS technologies.

This characteristic is useful in analog systems where small DC errors can influence sensor readings, measurement accuracy, and signal-conditioning performance.

Although the TLC27L2CDR provides high input impedance and low bias current, engineers should also consider input offset voltage, noise, gain-bandwidth limitations, and PCB leakage when designing high-impedance precision circuits.

4. Package

The TLC27L2CDR uses an 8-pin Small Outline Integrated Circuit package, identified by Texas Instruments package designation D.

  • Package Type: SOIC-8
  • Package Code: D
  • Number of Pins: 8
  • Body Width: Approximately 3.9mm
  • Body Length: Approximately 4.9mm
  • Lead Pitch: 1.27mm
  • Mounting Type: Surface Mount
  • Packaging: Tape and Reel
  • Standard Reel Quantity: 2,500 pieces
  • Operating Temperature: 0°C to +70°C

The SOIC-8 package provides a compact solution for dual operational amplifier applications. Its eight terminals include two amplifier outputs, four signal inputs, one positive supply connection, and one ground or negative supply connection.

The package is suitable for automated PCB assembly and is commonly used in industrial control boards, sensor modules, instrumentation equipment, and consumer electronic products.

For PCB layout and manufacturing, engineers should consult the official Texas Instruments mechanical package drawing for exact dimensions, recommended solder-pad geometry, and reflow soldering requirements.

5. Pinout

The TLC27L2CDR features an 8-pin configuration with two independent operational amplifier channels. Each amplifier includes a non-inverting input, an inverting input, and an output terminal.

Pin Configuration

Pin Number Pin Name Description
1 1OUT Output of operational amplifier channel 1
2 1IN− Inverting input of channel 1
3 1IN+ Non-inverting input of channel 1
4 GND / V− Ground or negative power supply
5 2IN+ Non-inverting input of channel 2
6 2IN− Inverting input of channel 2
7 2OUT Output of operational amplifier channel 2
8 VDD / V+ Positive power supply

Channel 1

Channel 1 uses pins 1, 2, and 3. Pin 3 is the non-inverting input, pin 2 is the inverting input, and pin 1 provides the amplifier output.

Channel 2

Channel 2 uses pins 5, 6, and 7. Pin 5 is the non-inverting input, pin 6 is the inverting input, and pin 7 provides the amplifier output.

Power Supply Connections

Pin 8 connects to the positive supply voltage, while pin 4 connects to ground in a single-supply circuit or to the negative supply in a dual-supply configuration.

The TLC27L2CDR can operate from a single supply or a split supply. The total supply voltage must remain within the recommended operating range for the selected temperature conditions.

Typical Circuit Configuration

In a non-inverting amplifier configuration, the input signal is connected to the non-inverting input. A feedback network consisting of resistors connects the output to the inverting input and establishes the desired closed-loop gain.

In an inverting amplifier configuration, the input signal is applied through an input resistor to the inverting input, while the non-inverting input is connected to an appropriate reference voltage.

The two internal amplifiers can be configured independently. For example, one channel can amplify a sensor signal while the other provides an active low-pass filter or voltage buffer.

For stable operation, engineers should select appropriate feedback components, ensure adequate supply decoupling, and avoid excessive capacitive loading directly at the amplifier output.

6. Specifications

The following table summarizes the principal technical characteristics of the TLC27L2CDR. Values should be interpreted according to the manufacturer's specified test conditions.

Parameter Specification
Manufacturer Texas Instruments
Part Number TLC27L2CDR
Product Family TLC27L2 / LinCMOS
Device Type Operational Amplifier
Amplifier Architecture CMOS
Number of Channels 2
Total Supply Voltage Range 3V to 16V (0°C to +70°C)
Operating Temperature 0°C to +70°C
Gain-Bandwidth Product Approximately 85kHz Typical
Slew Rate 0.03V/µs Typical
Input Bias Current Approximately 0.6pA Typical
Input Impedance Approximately 10¹²Ω Typical
Input Offset Voltage Up to 10mV for the TLC27L2 C Grade
Input Offset Voltage Drift Approximately 0.1µV/month Typical
Supply Current Approximately 10µA per Channel Typical
Typical Supply Power Approximately 95µW at VDD = 5V
Input Common-Mode Range Extends Below the Negative Rail
Output Voltage Range Includes the Negative Supply Rail
Supply Configuration Single or Dual Supply
Package SOIC-8
Package Code D
Mounting Type Surface Mount
Packaging Tape and Reel
Standard Reel Quantity 2,500 Pieces
Product Status ACTIVE

Supply voltage clarification: The 3V to 16V operating range applies to the C-grade device from 0°C to +70°C. Higher-temperature grades have different minimum supply voltage requirements. The TLC27L2CDR is the C-grade ordering version and should not be confused with TLC27L2IDR or TLC27L2MDR variants.

The gain-bandwidth product, slew rate, input bias current, offset voltage, and supply current are subject to test conditions and production variation. Refer to the latest official datasheet for guaranteed minimum and maximum limits.

7. Equivalent

When searching for an equivalent to the TLC27L2CDR, engineers should compare amplifier channel count, supply voltage range, input bias current, offset voltage, gain-bandwidth product, slew rate, output characteristics, operating temperature, and package pin configuration.

Potential Functional Alternatives

Part Number Manufacturer Device Function
TLC27L2ACDR Texas Instruments Dual CMOS Operational Amplifier, A Grade
TLC27L2BCDR Texas Instruments Dual CMOS Operational Amplifier, B Grade
TLC27L2IDR Texas Instruments Dual CMOS Operational Amplifier, Industrial Temperature
TLC272CDR Texas Instruments Dual CMOS Operational Amplifier
TLV9142 Texas Instruments Dual Low-Power CMOS Operational Amplifier

Replacement Selection Considerations

  • TLC27L2ACDR: A related device in the same family with a different input offset-voltage grade. Compare the offset specification and confirm the complete electrical requirements before substitution.
  • TLC27L2BCDR: A higher-precision offset-voltage grade within the TLC27L2 family. It may be considered when improved DC precision is required, subject to the relevant ordering specifications.
  • TLC27L2IDR: A related industrial-temperature version designed for -40°C to +85°C operation. Although it shares the core amplifier family, its temperature rating and minimum supply requirements differ from the C-grade version.
  • TLC272CDR: A dual CMOS operational amplifier that may be considered for related general-purpose analog applications. Compare input bias current, offset voltage, supply current, and input/output operating characteristics.
  • TLV9142: A newer TI dual operational amplifier with upgraded functionality, including rail-to-rail input and output capability. It has a different supply range and performance profile and should not be treated as an automatic pin-compatible replacement.

Important Replacement Checks

  • Number of amplifier channels and pin configuration.
  • Minimum and maximum total supply voltage.
  • Input common-mode voltage range.
  • Output voltage swing and output drive capability.
  • Input bias current and input offset voltage.
  • Gain-bandwidth product and slew rate.
  • Supply current and low-power performance.
  • Operating temperature range.
  • Package dimensions and PCB footprint.
  • Stability with the intended feedback network and capacitive load.

Important: The devices listed above are potential functional alternatives, not guaranteed drop-in replacements. Even products within the same amplifier family can have different electrical grades, temperature limits, and supply requirements. Always compare the latest manufacturer datasheets before substitution.

8. Manufacturer

Texas Instruments (TI) is a global semiconductor manufacturer specializing in analog integrated circuits, embedded processing, power management, interface products, and semiconductor technologies for industrial and consumer applications.

TI offers a broad portfolio of operational amplifiers, including precision amplifiers, low-power CMOS amplifiers, instrumentation amplifiers, audio amplifiers, and high-speed signal-processing devices.

The TLC27L2 series belongs to the LinCMOS operational amplifier family. This product family uses silicon-gate CMOS technology to combine high input impedance, low input bias current, low power consumption, and stable offset-voltage characteristics.

The TLC27L2CDR is designed for analog systems that require dual-channel amplification without the power consumption associated with many conventional bipolar amplifier solutions.

Its combination of high input impedance and low input bias current makes it especially useful in sensor interfaces, battery-operated equipment, and analog signal-conditioning circuits.

Official manufacturer website: Texas Instruments.

Official product page: TLC27L2CDR Product Information.

Official datasheet: TLC27L2 Datasheet (PDF).

9. Applications

The TLC27L2CDR is suitable for analog electronic systems that require low-power signal amplification, high input impedance, and two independent amplifier channels.

  • Sensor Signal Conditioning: Amplifies low-level signals from high-impedance sensors while minimizing input loading.
  • Industrial Instrumentation: Supports analog measurement and signal-conditioning circuits in industrial equipment.
  • Active Filters: Can be used in low-frequency active low-pass, high-pass, and band-pass filter circuits.
  • Voltage Buffering: Provides high-input-impedance buffering between sensitive analog sources and downstream circuit stages.
  • Battery-Powered Equipment: Its low supply current makes it suitable for portable electronic products.
  • Analog Signal Processing: Supports amplification, summing, subtraction, and other general-purpose analog functions.
  • Transducer Interfaces: Provides signal amplification and conditioning for resistive, capacitive, and other suitable transducer circuits.
  • Low-Frequency Measurement Systems: Supports DC and low-frequency measurement signal processing.
  • Consumer Electronics: Provides low-power analog amplification in electronic control and measurement products.
  • Remote Monitoring Equipment: Supports analog signal acquisition in systems where low operating power is important.

Why Low Input Bias Current Matters

Input bias current is an important parameter when selecting an operational amplifier for high-impedance analog circuits.

When an amplifier is connected to a sensor or measurement source through a high-value resistor, input bias current can produce an additional voltage error across that resistor. This error may affect measurement accuracy, especially when the input signal is very small.

The TLC27L2CDR uses CMOS input technology and offers a typical input bias current of approximately 0.6pA. This characteristic helps minimize the loading effect on sensitive signal sources.

For example, the device can be considered in circuits that process signals from capacitive sensors, high-resistance sensing networks, and low-current transducers.

Why Low Power Consumption Matters

In portable electronic equipment, continuous analog monitoring can contribute to overall battery consumption. An operational amplifier with low quiescent current helps reduce the energy required by the analog signal-processing section.

The TLC27L2CDR provides two amplifier channels with typical supply current of approximately 10µA per channel. This allows designers to implement multiple analog functions while maintaining a relatively low power budget.

Its low-power characteristics are particularly useful in remote monitoring devices, battery-operated instruments, and embedded control systems that must operate for extended periods without frequent battery replacement.

Design Considerations

When designing with the TLC27L2CDR, engineers should first determine whether the device's gain-bandwidth product and slew rate are sufficient for the required signal frequency and amplitude.

The device is intended for low-power and low-frequency analog applications. It should not automatically be selected for high-speed signal processing, fast ADC driver circuits, or applications requiring high slew rates.

The total supply voltage must remain within the recommended 3V to 16V range for the C-grade device at 0°C to +70°C. Single-supply and split-supply configurations are both supported.

When working with high-impedance inputs, PCB cleanliness and leakage paths should be considered. Flux residues, moisture, and contaminated circuit surfaces can introduce leakage currents that may reduce the practical benefit of the device's low input bias current.

Feedback resistor values should be selected carefully to balance noise, input offset effects, bandwidth, and power consumption. Suitable supply bypass capacitors should also be placed close to the device's supply pins.

Finally, engineers should verify output loading, input common-mode conditions, stability, and output swing using the official datasheet before completing the circuit design.

10. Disclaimer

This product information is provided for general technical reference, component selection, and engineering evaluation purposes. Specifications and electrical characteristics are based on available Texas Instruments documentation and may be updated by the manufacturer.

Customers and design engineers should consult the latest official TLC27L2 datasheet to verify recommended operating conditions, absolute maximum ratings, input offset voltage, input bias current, gain-bandwidth product, slew rate, output characteristics, and package dimensions before using the device in production designs.

Alternative components listed in this article are potential functional alternatives only. Similar amplifier functions do not guarantee identical electrical characteristics, package compatibility, pin assignments, or circuit performance.

Designers are responsible for validating supply conditions, input signal ranges, feedback stability, output loading, temperature limits, and overall analog performance within the complete electronic system.

Technical Reference

Manufacturer: Texas Instruments

Product: TLC27L2CDR

Product Family: TLC27L2 / LinCMOS

Device Type: Dual Low-Power CMOS Operational Amplifier

Package: 8-Pin SOIC (D)

Operating Temperature: 0°C to +70°C

Official Product Page: TLC27L2CDR

Official Datasheet: TLC27L2 Datasheet (PDF)

```

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```