Electronic Component Technical Guide
TLV70433DBVR – 3.3V 150mA Ultra-Low-IQ LDO Voltage Regulator
The TLV70433DBVR is a fixed 3.3V low-dropout linear regulator from Texas Instruments. It combines a wide 2.5V to 24V input range, 150mA output capability, ultra-low quiescent current and compact SOT-23-5 packaging for battery-powered and low-power electronic systems.
01. Product Introduction
The TLV70433DBVR is a fixed-output 3.3V low-dropout (LDO) linear voltage regulator manufactured by Texas Instruments. It belongs to the TLV704 family, which is designed to deliver regulated power while minimizing quiescent current consumption.
With an output current capability of up to 150mA and a recommended input voltage range extending to 24V, the TLV70433DBVR offers a practical solution for generating a 3.3V supply from higher-voltage DC sources.
One of its distinguishing characteristics is ultra-low quiescent current. The TLV704 family is designed to maintain low internal current consumption across a broad range of output load conditions, making it especially relevant to battery-operated devices.
The regulator also includes an internal soft-start function and overcurrent protection. These features help manage startup behavior and protect against excessive load current.
Its compact five-pin SOT-23 package supports integration into small electronic modules, sensor systems, industrial control boards and embedded power supplies.
Product Overview:
- Part Number: TLV70433DBVR
- Manufacturer: Texas Instruments
- Product Family: TLV704
- Device Type: Low-Dropout Linear Regulator
- Output Voltage: Fixed 3.3V
- Maximum Output Current: 150mA
- Recommended Input Voltage: 2.5V to 24V
- Typical Quiescent Current: 3.4µA at 100mA load
- Typical Dropout Voltage: 850mV at 100mA load
- Package: SOT-23-5 (DBV)
- Mounting: Surface Mount
- Product Status: Active
02. Key Benefits
Ultra-Low Quiescent Current
The TLV70433DBVR is designed for applications where internal regulator current consumption must remain low. This is valuable for systems that spend extended periods in standby or low-power operation.
Wide Input Voltage Capability
The recommended input voltage range of 2.5V to 24V provides flexibility when selecting an upstream power source. However, maintaining the regulated 3.3V output requires sufficient voltage headroom.
150mA Output Current
The regulator supports output loads up to 150mA, subject to thermal and electrical operating conditions.
Compact PCB Footprint
The SOT-23-5 package is suitable for small printed circuit boards and space-constrained electronic modules.
Integrated Soft-Start
Internal soft-start helps control the output voltage rise during startup and reduce inrush current.
Overcurrent Protection
Built-in current limiting helps protect the regulator during excessive load current or output short-circuit conditions.
Simple Power Supply Architecture
As a linear regulator, the TLV70433DBVR does not require an external switching inductor, simplifying component selection and PCB design.
03. Features
- Fixed 3.3V regulated output.
- Up to 150mA output current.
- 2.5V to 24V recommended input voltage range.
- Ultra-low typical quiescent current of 3.4µA at 100mA load.
- Typical dropout voltage of 850mV at 100mA.
- Integrated internal soft-start.
- Built-in overcurrent protection.
- Stable with appropriate ceramic output capacitors.
- Compact five-pin SOT-23 package.
- Operating junction temperature range of -40°C to +125°C.
- Suitable for battery-powered and low-power electronic systems.
Low-Power Regulation
Unlike conventional linear regulators with relatively high ground current, the TLV704 family is optimized to minimize current consumed by the regulator itself.
Dropout Operation
Dropout voltage represents the minimum input-to-output voltage difference required to maintain regulation under specified conditions. The required headroom increases with load current and varies with temperature.
Soft-Start Function
The internal soft-start mechanism helps control output startup behavior without requiring a separate external soft-start network.
Capacitor Stability
Proper output capacitance is essential for stable operation. The manufacturer's latest datasheet should be followed when selecting nominal capacitance and accounting for ceramic capacitor derating.
04. Package
The TLV70433DBVR is supplied in a five-pin SOT-23 package, designated DBV by Texas Instruments.
| Package Attribute | Description |
|---|---|
| Package Type | SOT-23-5 |
| TI Package Code | DBV |
| Number of Pins | 5 |
| Nominal Body Size | 2.90 × 1.60mm |
| Mounting Method | Surface Mount |
| Packaging | Tape and Reel |
| Standard Reel Quantity | 3,000 Pieces |
| Operating Junction Temperature | -40°C to +125°C |
The compact SOT-23-5 package is compatible with automated PCB assembly processes.
Thermal performance depends on the surrounding copper area, board construction and operating conditions.
Engineers should follow the official TI land-pattern and package drawings when preparing production PCB layouts.
05. Pinout
The TLV70433DBVR uses five physical pins, including the input, output, ground and two no-connect terminals.
| Pin | Name | Function |
|---|---|---|
| 1 | GND | Ground reference |
| 2 | IN | Input supply voltage |
| 3 | OUT | Regulated 3.3V output |
| 4 | NC | No internal connection |
| 5 | NC | No internal connection |
TLV70433DBVR Pin Configuration – Top View:
TLV70433DBVR
SOT-23-5
_____________
GND 1| |5 NC
IN 2| TLV704 |4 NC
OUT 3|___________|
1 = GND
2 = IN
3 = OUT
4 = NC
5 = NC
The diagram is a simplified functional pin listing. Refer to the official TI package drawing for the exact physical pin positions.
Typical Application Circuit:
DC Input
|
+---------- IN
| |
CIN TLV70433
| |
GND OUT ------ +3.3V
| |
GND COUT
|
GND
TI recommends a local input bypass capacitor and an appropriate output capacitor. A nominal 0.1µF input capacitor and 1µF output capacitor are common reference values for the device.
The effective output capacitance should remain above the minimum required by the datasheet after voltage bias, tolerance and temperature derating.
NC pins may be left open or connected to ground where permitted by the manufacturer.
06. Specifications
The following table summarizes important TLV70433DBVR electrical and mechanical characteristics based on Texas Instruments technical documentation.
| Parameter | Symbol | Value |
|---|---|---|
| Manufacturer | - | Texas Instruments |
| Part Number | - | TLV70433DBVR |
| Regulator Type | - | Positive LDO |
| Output Configuration | - | Fixed |
| Number of Outputs | - | 1 |
| Nominal Output Voltage | VOUT | 3.3V |
| Maximum Output Current | IOUT | 150mA |
| Recommended Input Voltage | VIN | 2.5V to 24V |
| Typical Quiescent Current | IQ | 3.4µA at 100mA load |
| Typical Dropout Voltage | VDO | 850mV at 100mA |
| Output Capacitor | COUT | 1µF nominal recommended; verify effective capacitance |
| Overcurrent Protection | - | Integrated |
| Soft-Start | - | Integrated |
| Operating Junction Temperature | TJ | -40°C to +125°C |
| Package | - | SOT-23-5 |
| Package Code | - | DBV |
| Standard Reel Quantity | - | 3,000 |
Important Input Voltage Consideration
Although the regulator supports a wide input range, a 3.3V regulated output requires the input voltage to exceed the output voltage by sufficient dropout headroom.
The minimum recommended input voltage of 2.5V does not mean that a 3.3V output can be maintained from a 2.5V source.
Power Dissipation Calculation
For a linear regulator, power dissipation can be estimated using:
P ≈ (VIN - VOUT) × IOUT + VIN × IGND
For example, with a 12V input, 3.3V output and 50mA load current:
Ppass = (12 - 3.3) × 0.05 = 0.435W
The pass element alone dissipates approximately 435mW, excluding internal ground-current consumption.
Such operating conditions require careful thermal evaluation in a compact SOT-23 package.
High input voltage does not automatically mean high usable output current. Thermal limitations may substantially reduce the permissible continuous load.
Official Datasheet: Texas Instruments TLV704 Datasheet PDF
07. Equivalent
When searching for a TLV70433DBVR equivalent, engineers should evaluate output voltage, current capability, quiescent current, dropout voltage, input range, package and pin compatibility.
Because the TLV70433DBVR is designed for low-power operation, quiescent current is especially important when selecting an alternative.
| Related Part | Output | Package | Consideration |
|---|---|---|---|
| TLV70433DBVR | 3.3V | SOT-23-5 | Original device |
| TLV70433DBVT | 3.3V | SOT-23-5 | Same family; smaller reel quantity |
| TLV70433DBVRG4 | 3.3V | SOT-23-5 | Related ordering variant; verify procurement requirements |
| TLV70430DBVR | 3.0V | SOT-23-5 | Different output voltage; not a direct 3.3V substitute |
| TLV70418DBVR | 1.8V | SOT-23-5 | Different output voltage; not a direct substitute |
Replacement Selection Checklist:
- Fixed 3.3V output voltage.
- Compatible output voltage accuracy.
- At least the required continuous load current.
- Suitable input voltage range.
- Acceptable dropout voltage at the intended load current.
- Comparable quiescent current for low-power applications.
- Compatible output capacitor requirements.
- Matching package footprint and pin assignment.
- Appropriate thermal resistance and power dissipation capability.
- Compatible protection and startup characteristics.
Other 3.3V LDO regulators may provide similar functionality, but they should not be considered direct replacements solely because their output voltages match.
Important: Always verify the latest datasheet and complete manufacturer ordering information before approving a replacement.
08. Manufacturer
The TLV70433DBVR is manufactured by Texas Instruments (TI), a semiconductor company specializing in analog and embedded processing technologies.
TI offers voltage regulators, power management ICs, amplifiers, interface devices, microcontrollers and other semiconductor products for industrial, automotive, communication and consumer electronic applications.
The TLV704 series focuses on low-quiescent-current linear regulation with wide input voltage capability.
Manufacturer Information:
- Company: Texas Instruments
- Product: TLV70433DBVR
- Product Family: TLV704
- Category: Linear Voltage Regulators
- Output Voltage: 3.3V
- Package: SOT-23-5
- Official Website: www.ti.com
- Product Page: TLV70433DBVR Product Information
- Datasheet: TLV704 Datasheet
When purchasing the TLV70433DBVR, buyers should verify the manufacturer ordering code, product marking, packaging, traceability and applicable quality documentation.
Product availability and pricing should be confirmed with the supplier at the time of procurement.
09. Applications
The TLV70433DBVR is designed for low-power electronic systems requiring a regulated 3.3V supply.
1. Battery-Powered Electronics
Ultra-low quiescent current helps reduce internal regulator power consumption in battery-operated devices, particularly during standby and light-load operation.
2. Microcontroller Power Supplies
The regulator can provide a 3.3V rail for compatible low-power microcontrollers and supporting circuitry.
3. Sensor and Monitoring Modules
Environmental sensors, measurement circuits and remote monitoring modules often require stable low-current supply rails.
4. Home and Building Automation
Smart building controllers, sensor nodes and automation interfaces can benefit from compact, low-power voltage regulation.
5. Retail Automation and Payment Systems
The TLV704 family can support suitable auxiliary power rails in electronic payment terminals and retail automation equipment.
6. Grid Infrastructure
Low-power monitoring and control functions in grid infrastructure equipment may use a regulated 3.3V supply.
7. Medical Electronic Equipment
The regulator may be considered for suitable low-power medical electronic circuits, subject to system-level safety, qualification and regulatory requirements.
8. Lighting Control Systems
Lighting controllers and monitoring circuits may require local regulated supplies for sensors, communication and control logic.
9. Industrial Embedded Systems
Industrial modules can use the device to supply compatible low-current logic circuits from higher-voltage DC sources.
10. Auxiliary 3.3V Power Rails
The TLV70433DBVR can provide a secondary regulated supply for low-power peripherals, provided input headroom and thermal requirements are satisfied.
Application Design Recommendations:
- Verify the input voltage and required dropout headroom.
- Do not exceed the rated 150mA output current.
- Evaluate thermal dissipation at the highest input voltage.
- Use appropriate input and output capacitors.
- Account for ceramic capacitor DC-bias derating.
- Place bypass capacitors close to the regulator pins.
- Use short ground and power connections.
- Check transient load response for sensitive circuits.
- Verify operating junction temperature under worst-case conditions.
- Follow TI's official PCB layout recommendations.
The TLV70433DBVR is particularly suitable for applications prioritizing low standby consumption, wide input voltage compatibility and compact power supply design.
10. Disclaimer
This TLV70433DBVR technical guide is provided for general engineering reference, product identification and electronic component selection.
Product specifications are based on publicly available Texas Instruments documentation.
TI documentation distinguishes certain legacy and newer chip implementations within the TLV704 family. Some electrical limits, capacitor requirements and thermal characteristics may differ between implementations.
Engineers should verify the latest official datasheet and applicable device revision before finalizing a circuit design.
The 24V recommended maximum input voltage does not guarantee continuous 150mA operation at every input voltage. Actual output current capability may be limited by power dissipation and junction temperature.
Potential replacement devices must be independently evaluated for electrical, mechanical and application compatibility.
Official Technical Reference: Texas Instruments TLV704 Datasheet
Editorial Note: This is an independent technical product overview intended to support electronic component research and engineering decisions. It is not an official Texas Instruments publication or a guarantee of availability, interchangeability or suitability for a specific application.

