TPA6304QDDVRQ1 TI 4-Channel Automotive Class-D Audio Amplifier
Product Technical Guide TPA6304QDDVRQ1 Automotive Class-D Audio Amplifier Technical GuideDiscover the Texas Instruments TPA6304QDDVRQ1, a four-channel automotive Class-D audio amplifier with analog aud…
- Part No.:
- TPA6304QDDVRQ1
- Manufacturer:
- Texas Instruments
- Package:
- 44-PowerTSSOP (0.244", 6.20mm Width)
- Datasheet:
- TPA6304QDDVRQ1.pdf
- Description:
- 45-W, 2.1-MHZ ANALOG INPUT 4-CHA
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
TPA6304QDDVRQ1 TI 4-Channel Automotive Class-D Audio Amplifier
Discover the Texas Instruments TPA6304QDDVRQ1, a four-channel automotive Class-D audio amplifier with analog audio inputs, 2.1MHz PWM switching, I2C diagnostics, integrated protection, and a 44-pin HTSSOP package for automotive infotainment systems.
Product Introduction
The TPA6304QDDVRQ1 is an automotive-qualified, four-channel Class-D audio power amplifier manufactured by Texas Instruments. It belongs to the TPA6304-Q1 family and incorporates Burr-Brown audio technology for automotive sound systems.
The device accepts four single-ended analog audio inputs and provides four amplified speaker outputs. Its Class-D architecture improves electrical efficiency compared with conventional Class-AB amplifiers, helping reduce heat dissipation and the size of the thermal solution.
A nominal 2.1MHz PWM switching frequency enables the amplifier to operate above the AM radio band, supporting compact output filtering and improved electromagnetic compatibility in automotive installations.
The TPA6304QDDVRQ1 operates from a 4.5V to 18V supply and supports automotive start-stop conditions. TI specifies a 45W product power rating and documents 27W into 4 ohms at 14.4V and 10% total harmonic distortion.
Integrated I2C diagnostics support detection of output faults and connected speaker conditions. Protection functions include output short-circuit protection, overtemperature protection, DC offset protection, and load-dump tolerance.
The amplifier is supplied in a 44-pin HTSSOP package with an upward-facing exposed thermal pad.
Lifecycle Status: Texas Instruments currently lists TPA6304QDDVRQ1 as ACTIVE.
Key Benefits
Four-Channel Audio Output
Supports four independent speaker channels for automotive head units and infotainment systems.
High-Efficiency Class-D Design
Reduces amplifier power losses and thermal requirements compared with conventional Class-AB solutions.
Automotive Protection
Provides load-dump tolerance, short-circuit protection, thermal monitoring, and speaker diagnostics.
I2C Diagnostics
Enables host-controlled fault reporting, gain configuration, and load diagnostic functions.
Features
- Texas Instruments TPA6304-Q1 automotive audio amplifier family
- Four-channel Class-D audio power amplification
- Burr-Brown audio technology
- Four single-ended analog audio inputs
- 45W TI product output-power rating
- 27W into 4 ohms at 14.4V and 10% THD
- Supports 2-ohm and 4-ohm speaker loads
- 4.5V to 18V operating supply voltage
- 2.1MHz nominal PWM switching frequency
- Configurable switching and electromagnetic interference mitigation
- Spread-spectrum operating capability
- Phase-offset and slew-rate control
- I2C control and diagnostic interface
- Selectable gain settings of 10dB, 16dB, 22dB, and 28dB
- Parallel bridge-tied load (PBTL) configuration support
- Programmable clipping detection
- Speaker open-load detection
- Shorted-load diagnostics
- Output-to-battery and output-to-ground short detection
- AC load impedance measurement
- Load current limiting
- Thermal gain foldback
- DC offset protection
- 40V load-dump protection
- Fast autonomous startup diagnostics
- AEC-Q100 Grade 1 qualification
- -40°C to +125°C ambient operating temperature
- 44-pin HTSSOP surface-mount package
- Upward-facing exposed thermal pad
Design Note: Output power, distortion, efficiency, and temperature rise depend on the supply voltage, speaker impedance, modulation configuration, PCB layout, and thermal conditions.
Package
Package Type: HTSSOP
Package Drawing: DDV
Pin Count: 44
Package Dimensions: Approximately 14mm x 8.1mm overall
Package Area: Approximately 113.4mm²
Thermal Pad: Exposed pad facing upward
Mounting: Surface Mount
Standard Packaging: Tape and Reel
Standard Reel Quantity: 2,000 pieces
Ordering Part Number: TPA6304QDDVRQ1
The DDV HTSSOP-44 package is designed for compact automotive audio amplifier systems. Its upward-facing thermal pad requires a suitable thermal interface and mechanical heat-dissipation strategy.
PCB Design Note: Follow TI's official package drawing, thermal design guidance, and recommended PCB layout. Do not assume the thermal pad can be handled in the same manner as a conventional bottom-exposed-pad package.
Pinout
The TPA6304QDDVRQ1 uses a 44-pin HTSSOP package. Its signal groups include four analog audio inputs, four differential speaker-output channels, power supplies, ground connections, I2C control, and diagnostic or control functions.
Important: These descriptions identify functional signal groups, not physical pin numbers. The exact 44-pin numbering and signal assignments must be taken from the official TI datasheet before PCB design.
Layout Recommendation: Separate sensitive analog input routing from high-current switching paths and follow TI's recommended grounding and electromagnetic compatibility practices.
Specifications
| Parameter | Value |
|---|---|
| Part Number | TPA6304QDDVRQ1 |
| Manufacturer | Texas Instruments |
| Product Family | TPA6304-Q1 |
| Device Type | Automotive Audio Power Amplifier |
| Amplifier Class | Class-D |
| Audio Channels | 4 |
| Audio Input Type | Single-Ended Analog |
| Output Power Rating | 45W (TI Product Rating) |
| Output Power Example | 27W into 4Ω at 14.4V, 10% THD |
| Supply Voltage | 4.5V to 18V |
| Nominal Switching Frequency | 2.1MHz |
| Maximum Listed Switching Frequency | 2.3MHz |
| Supported Speaker Loads | 2Ω / 4Ω |
| Gain Settings | 10 / 16 / 22 / 28dB |
| Control Interface | I2C |
| Parallel Channel Operation | PBTL Supported |
| Load Diagnostics | Supported |
| Clip Detection | Programmable |
| Load Current Limiting | Supported |
| Thermal Gain Foldback | Supported |
| Load-Dump Protection | 40V |
| Automotive Qualification | AEC-Q100 Grade 1 |
| Operating Temperature | -40°C to +125°C |
| Package | 44-Pin HTSSOP |
| Package Drawing | DDV |
| Thermal Pad | Exposed Pad Up |
| Mounting Type | Surface Mount |
| Packaging | Tape and Reel |
| Standard Package Quantity | 2,000 |
| RoHS | Yes |
| Product Status | ACTIVE |
Power Rating Note: The 45W product rating and the 27W output specification at 14.4V, 4Ω, and 10% THD describe different conditions. Do not treat either as guaranteed continuous output power without evaluating the specified test conditions and thermal limitations.
EMC Note: Achieving an automotive electromagnetic compatibility target requires system-level verification, including PCB layout, output filtering, grounding, cable routing, and test configuration.
Equivalent
When searching for a TPA6304QDDVRQ1 equivalent, replacement, or alternative, compare amplifier class, number of channels, output power, operating voltage, audio input type, control interface, speaker-load compatibility, automotive qualification, package, and thermal requirements.
TPA6304QDDVRQ1.A: TI identifies this ordering reference as identical to TPA6304QDDVRQ1 on its official part-details page. Confirm ordering and procurement conventions with the supplier.
TPA6304-Q1 Family: Devices or ordering options within the same TI product family should be reviewed first when an exact replacement or alternate supply arrangement is required.
Other Automotive Class-D Amplifiers: Similar four-channel automotive audio amplifiers may be considered for functional comparison, but they can differ in supply requirements, output power, diagnostic interfaces, package footprint, switching frequency, and control software.
Replacement Recommendation: For an existing automotive PCB, prioritize the exact TPA6304QDDVRQ1 ordering code. A different amplifier should be introduced only after schematic, thermal, EMC, acoustic, and software validation.
Important: No unrelated amplifier is identified here as a verified pin-to-pin replacement.
Manufacturer
Texas Instruments is a semiconductor manufacturer supplying analog integrated circuits, embedded processing products, power management devices, and audio amplifiers for industrial, automotive, and electronic systems.
The TPA6304-Q1 is part of TI's automotive audio amplifier portfolio. It combines efficient Class-D power conversion with analog audio inputs, I2C diagnostics, and integrated automotive protection features.
Official Manufacturer: Texas Instruments
Official Product Page: TPA6304-Q1 Product Information
Exact Ordering Code: TPA6304QDDVRQ1 Part Details
Official Datasheet: TPA6304-Q1 Datasheet PDF
Evaluation Module: TPA6304Q1EVM.
Product Status: ACTIVE according to TI's current product listing. Confirm price, lead time, and available inventory when placing an order.
Applications
Automotive Infotainment
Four-channel speaker amplification for vehicle infotainment and integrated entertainment systems.
Automotive Head Units
Efficient audio output stages for head units receiving analog audio signals.
Vehicle Speaker Systems
Multi-channel speaker driving with diagnostic monitoring and programmable gain options.
Dashboard Audio Electronics
Compact Class-D audio amplification integrated into vehicle electronic control assemblies.
Automotive Audio Modules
Standalone or integrated amplifier modules requiring efficient power conversion and fault diagnostics.
Diagnostic-Enabled Audio Systems
Speaker monitoring and fault detection in automotive audio architectures using I2C supervision.
Disclaimer
This technical guide is provided for electronic component identification, engineering reference, and sourcing purposes. Specifications are based on Texas Instruments product information and the TPA6304-Q1 datasheet. Output power, distortion, efficiency, thermal characteristics, protection behavior, package dimensions, pin assignments, and electrical limits must be verified against the latest manufacturer documentation before design or procurement.
Automotive qualification does not eliminate the need for system-level functional, thermal, EMC, and reliability testing. Alternative devices are comparison candidates only unless explicitly confirmed as interchangeable by the manufacturer. Product availability, price, and delivery schedules may change without notice.

