TPD4S012DRYR – 4-Channel USB ESD Protection Diode | Datasheet, Pinout & Applications
ESD PROTECTION IC · TECHNICAL GUIDE TPD4S012DRYR – 4-Channel Low-Capacitance USB ESD Protection Diode ArrayComplete technical guide to the Texas Instruments TPD4S012DRYR, including USB ESD protection
- Part No.:
- TPD4S012DRYR
- Manufacturer:
- Texas Instruments
- Package:
- 6-UFDFN
- Datasheet:
- TPD4S012DRYR.pdf
- Description:
- TVS DIODE 5.5VWM 6SON
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
TPD4S012DRYR – 4-Channel USB ESD Protection Diode | Datasheet, Pinout & Applications
TPD4S012DRYR – 4-Channel Low-Capacitance USB ESD Protection Diode Array
Complete technical guide to the Texas Instruments TPD4S012DRYR, including USB ESD protection capabilities, key benefits, features, USON-6 package, pinout, electrical specifications, equivalent options, manufacturer information, and typical applications.
01. Product Introduction
The TPD4S012DRYR is a four-channel electrostatic discharge (ESD) protection diode array manufactured by Texas Instruments. Designed for USB high-speed, USB On-The-Go (OTG), and USB charging interfaces, the device helps protect sensitive electronic circuitry against transient voltage events.
The TPD4S012 integrates transient voltage suppression structures for USB signal and power connections. Its protection architecture supports the USB D+, D-, and ID signals while providing additional protection for the VBUS power line.
The device features a typical signal-line capacitance of only 0.8pF, making it suitable for high-speed USB communication with data rates exceeding 480Mbps.
It provides system-level ESD protection rated at ±10kV contact discharge according to IEC 61000-4-2 and includes a VBUS protection structure tolerant of voltages up to 15V.
The compact six-pin USON package measures approximately 1.45mm × 1.0mm, allowing integration near USB connectors in space-constrained electronic products.
Typical applications include smartphones, digital cameras, portable computers, GPS equipment, and other devices using USB 2.0 communication or charging interfaces.
02. Key Benefits
- Four-Channel Protection: Integrates ESD protection for USB data, identification, and power connections.
- Low Signal Capacitance: Typical 0.8pF capacitance helps minimize loading on high-speed USB signals.
- High ESD Immunity: Provides ±10kV IEC 61000-4-2 contact discharge protection.
- VBUS Voltage Tolerance: Supports USB charging environments with VBUS voltage tolerance up to 15V.
- Compact PCB Footprint: The miniature USON-6 package supports high-density electronic assemblies.
- High-Speed Compatibility: Supports USB data rates exceeding 480Mbps.
- Integrated Protection: Reduces the need for multiple discrete ESD protection components.
- Simple Integration: A flow-through layout approach supports short signal paths near the USB connector.
03. Features
- Four-channel transient voltage suppression diode array.
- Designed for USB high-speed, USB OTG, and USB charger interfaces.
- Protection for D+, D-, ID, and VBUS connections.
- 0.8pF typical capacitance on USB signal lines.
- Supports data rates exceeding 480Mbps.
- ±10kV IEC 61000-4-2 contact ESD protection.
- IEC 61000-4-5 surge protection capability.
- 3A peak surge current rating under specified conditions.
- 5.5V reverse working voltage rating.
- 15V-tolerant VBUS protection structure.
- Low dynamic resistance for effective transient clamping.
- Unidirectional protection architecture.
- Integrated ESD protection clamps.
- Compact six-pin USON package.
- Operating temperature range from -40°C to +85°C.
- RoHS-compliant ordering option.
04. Package
The TPD4S012DRYR is supplied in a miniature six-pin USON package, designed for compact surface-mount applications.
| Parameter | Description |
|---|---|
| Part Number | TPD4S012DRYR |
| Manufacturer | Texas Instruments |
| Package Type | USON-6 |
| Package Code | DRY |
| Pin Count | 6 |
| Package Dimensions | 1.45 × 1.0mm |
| Mounting Type | Surface Mount |
| Packaging | Tape and Reel |
| Standard Reel Quantity | 5000 pieces |
| Device Marking | 3B |
| Lead Finish | NiPdAu |
| Moisture Sensitivity | MSL 1 |
The small package size allows the device to be positioned close to the USB connector, helping reduce the length of unprotected PCB traces.
PCB Layout Recommendation: Place the protection array near the external connector and provide a short, low-inductance ground return. Excessive trace length can increase the voltage experienced by protected circuitry during an ESD event.
The DRYR suffix identifies the tape-and-reel configuration used for automated surface-mount assembly.
05. Pinout
The TPD4S012DRYR uses a six-pin package with protection connections for USB data signals, the USB identification signal, VBUS, and ground.
| Signal | Function | Description |
|---|---|---|
| D+ | USB Data Protection | Protection connection for the positive USB differential data line. |
| D- | USB Data Protection | Protection connection for the negative USB differential data line. |
| ID | USB OTG Identification | ESD protection for the USB OTG identification connection. |
| VBUS | USB Power Protection | Protection connection for the USB bus power line, featuring 15V tolerance. |
| GND | Ground | Ground return for transient protection current. |
Pin Configuration: The table identifies protected signal functions rather than physical pin numbers. Refer to the official TI DRY package pin configuration diagram for the exact six-pin assignment.
Design Note: The device is a passive protection component and does not require an enable input or digital control interface. It should be connected according to the manufacturer's recommended USB protection circuit.
06. Specifications
The following table summarizes the primary electrical and mechanical characteristics of the TPD4S012DRYR.
| Parameter | Value |
|---|---|
| Part Number | TPD4S012DRYR |
| Manufacturer | Texas Instruments |
| Product Category | ESD Protection Diode Array |
| Device Type | TVS / ESD Protection |
| Number of Channels | 4 |
| Protection Direction | Unidirectional |
| Reverse Working Voltage | 5.5V |
| VBUS Voltage Tolerance | 15V |
| Typical Signal Capacitance | 0.8pF |
| IEC 61000-4-2 Contact ESD | ±10kV |
| Peak Surge Current | 3A |
| Peak Pulse Power | 60W maximum, 8/20µs waveform |
| Typical Dynamic Resistance | 1Ω |
| Maximum I/O Leakage Current | 500nA |
| Minimum Breakdown Voltage | 20V, applicable high-voltage protection path |
| Supported Interface | USB 2.0 |
| Supported Data Rate | Greater than 480Mbps |
| Operating Temperature | -40°C to +85°C |
| Package | USON-6 (DRY) |
| Package Dimensions | 1.45 × 1.0mm |
| Mounting Type | Surface Mount |
Electrical Consideration: The 5.5V reverse working voltage and 15V VBUS tolerance describe different aspects of the protection architecture. The 15V tolerance must not be interpreted as a universal working voltage rating for every protected signal line.
ESD Rating Consideration: The ±10kV rating refers to IEC 61000-4-2 contact discharge testing. Actual system-level protection performance depends on PCB layout, grounding, connector placement, and the characteristics of the protected circuit.
Official Datasheet: TPD4S012 Datasheet – Texas Instruments
07. Equivalent
When evaluating a TPD4S012DRYR equivalent, engineers should compare the number of protected channels, signal capacitance, VBUS tolerance, ESD ratings, package footprint, and pin configuration.
| Part Number | Relationship | Replacement Considerations |
|---|---|---|
| TPD4S012DRYR.B | Manufacturer-listed equivalent ordering code. | TI identifies this as identical to TPD4S012DRYR; verify purchasing and packaging details. |
| TPD4S012DRYRG4.B | Related ordering variant within the same device family. | Confirm orderability, package, and assembly requirements. |
| TPD4EUSB30 | Related Texas Instruments USB ESD protection device. | Potential redesign candidate; verify protection architecture, package, and signal compatibility. |
Replacement Recommendation: The identical ordering variant TPD4S012DRYR.B is the closest purchasing alternative. Other ESD protection devices should not be considered direct replacements without verifying electrical characteristics and PCB compatibility.
For USB protection circuits, capacitance, clamping performance, and VBUS tolerance are particularly important. Selecting a device solely by the number of channels may result in inadequate protection or degraded signal integrity.
08. Manufacturer
Texas Instruments (TI) is a global semiconductor manufacturer specializing in analog integrated circuits, embedded processing, interface devices, and power management technologies.
Its ESD protection portfolio includes low-capacitance diode arrays designed to protect high-speed communication interfaces and sensitive electronic systems against electrostatic discharge events.
The TPD4S012DRYR belongs to TI's USB interface protection family and is designed to combine multiple protection functions within a miniature package.
Texas Instruments provides datasheets, application notes, simulation models, and PCB layout guidance to support the integration of protection devices into electronic products.
Manufacturer Product Page: Texas Instruments TPD4S012 Product Information
Product Lifecycle: Texas Instruments currently identifies the TPD4S012DRYR as an active product. Buyers should verify the latest inventory, packaging, and ordering information before procurement.
09. Applications
The TPD4S012DRYR is designed for USB interfaces in electronic systems requiring low-capacitance signal protection and protection against external electrostatic discharge events.
- Smartphones: Protects USB data and charging interface connections against ESD events.
- Digital Cameras: Provides protection for USB communication and charging ports.
- GPS Devices: Helps protect USB interfaces used for data transfer and external power connections.
- Portable Computers: Supports ESD protection on compatible USB 2.0 ports.
- USB OTG Devices: Protects D+, D-, ID, and VBUS connections in USB On-The-Go architectures.
- Portable Electronic Equipment: Provides compact USB interface protection where PCB space is limited.
- USB Charging Interfaces: Helps protect sensitive downstream circuitry from ESD transients at exposed connector pins.
Application Example: In a portable USB 2.0 device, the TPD4S012DRYR can be positioned near the USB connector to provide ESD protection for the D+, D-, ID, and VBUS connections before those signals reach the USB controller and associated power circuitry.
The low-capacitance signal protection helps preserve USB high-speed signal integrity while providing a discharge path for transient events.
Design Consideration: The TPD4S012DRYR is an ESD protection device rather than a USB controller, charger IC, or power switch. Additional circuitry may be necessary for overcurrent protection, charging control, and sustained overvoltage protection.
10. Disclaimer
This TPD4S012DRYR technical guide is intended for general product information, electronic component selection, and engineering reference purposes.
All electrical specifications, package dimensions, pin assignments, and operating conditions should be verified against the latest official Texas Instruments datasheet before integrating the device into an electronic product.
Alternative components listed in this guide are provided for preliminary evaluation only. Similar protection ratings or channel counts do not guarantee electrical, mechanical, or pin-to-pin compatibility.
Actual ESD protection performance depends on circuit implementation, PCB layout, grounding, and system-level testing.
Product pricing, inventory availability, packaging options, and lifecycle information may change without notice.
All manufacturer names, trademarks, and product identifiers remain the property of their respective owners.

