Home > The Posts > Product Guides > TPS22953QDQCRQ1 Automotive 5A Load Switch Technical Guide
TPS22953QDQCRQ1 - Texas Instruments

TPS22953QDQCRQ1 Automotive 5A Load Switch Technical Guide

Product Technical Guide TPS22953QDQCRQ1 Automotive 5A Load Switch Technical GuideTexas Instruments AEC-Q100 qualified, 5A single-channel load switch featuring 0.7V to 5.7V input operation, 14mΩ typica…

In Stock 1,863 Available Inventory
Part No.:
TPS22953QDQCRQ1
Manufacturer:
Texas Instruments
Package:
10-WFDFN Exposed Pad
Datasheet:
TPS22953QDQCRQ1.pdf
Description:
AUTOMOTIVE 5.7-V, 5-A, 14-M LOAD
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

TPS22953QDQCRQ1 Automotive 5A Load Switch Technical Guide

Product Technical Guide
TPS22953QDQCRQ1 Automotive 5A Load Switch Technical Guide

Texas Instruments AEC-Q100 qualified, 5A single-channel load switch featuring 0.7V to 5.7V input operation, 14mΩ typical on-resistance, adjustable rise time, voltage monitoring, and reverse-current blocking.

Part NumberTPS22953QDQCRQ1
ManufacturerTexas Instruments
Device TypeAutomotive Load Switch
01

Product Introduction

The TPS22953QDQCRQ1 is an automotive-qualified, single-channel load switch manufactured by Texas Instruments. It combines a low-resistance N-channel MOSFET with integrated control and voltage-monitoring circuitry to manage power delivery to electronic loads.

The device supports a switched input voltage from 0.7V to 5.7V and a maximum continuous load current of 5A, subject to thermal and operating conditions. Its typical on-resistance is only 14mΩ at VIN = 5V and VBIAS = 5V, reducing conduction losses in power distribution systems.

Unlike a basic MOSFET power switch, the TPS22953-Q1 integrates adjustable output rise-time control, an adjustable undervoltage-lockout function, an adjustable voltage supervisor, a Power Good indicator, and thermal shutdown.

Its controlled turn-on behavior helps reduce inrush current when powering loads with substantial input capacitance. This can minimize supply droop and improve system stability during startup.

The TPS22953-Q1 also provides reverse-current blocking when disabled, helping prevent current from flowing backward through the switch when the output remains energized after the input or switch is turned off.

The device is qualified to AEC-Q100 Grade 1 and operates over an ambient temperature range of -40°C to +125°C. It is supplied in a compact 10-pin WSON package measuring 3mm × 2mm.

These characteristics make the TPS22953QDQCRQ1 suitable for automotive electronic control units, infotainment systems, camera modules, communication equipment, and other applications requiring controlled power sequencing.

02

Key Benefits

Efficient Power Distribution

Low 14mΩ typical on-resistance minimizes conduction losses and voltage drop during normal operation.

Controlled Startup

Adjustable output rise time limits capacitive inrush current and helps prevent disturbances on shared supply rails.

Integrated Monitoring

Adjustable UVLO, voltage supervision, Power Good indication, and thermal shutdown improve power-management control.

Automotive Qualification

AEC-Q100 Grade 1 qualification supports demanding automotive electronic environments.

03

Features

  • Automotive-qualified single-channel load switch
  • AEC-Q100 Grade 1 qualification
  • 0.7V to 5.7V switched input voltage range
  • Maximum continuous switch current of 5A
  • 14mΩ typical on-resistance at VIN = 5V and VBIAS = 5V
  • Integrated N-channel MOSFET power switch
  • Independent bias-supply connection
  • Active-high enable input
  • Adjustable undervoltage-lockout threshold
  • Adjustable voltage supervisor
  • Open-drain Power Good indicator
  • Adjustable output slew rate through an external CT capacitor
  • Inrush-current reduction during startup
  • Reverse-current blocking when disabled
  • Automatic restart following supervisor fault recovery when enabled
  • Integrated thermal shutdown
  • 34µA typical quiescent current
  • 5µA typical shutdown current
  • Maximum quiescent-current specification of 50µA under defined conditions
  • 2kV human-body-model ESD performance
  • 750V charged-device-model ESD performance
  • 10-pin WSON package with exposed thermal pad
  • 3mm × 2mm package body
  • -40°C to +125°C operating ambient temperature range

Important Functional Distinction: The TPS22953-Q1 provides reverse-current blocking when disabled. Its companion TPS22954-Q1 instead provides enhanced quick output discharge. These functions must not be treated as identical.

Current Protection: The device includes thermal shutdown but is not specified as an adjustable current-limited eFuse. External protection may be necessary when the system requires defined overcurrent or short-circuit limiting.

04

Package

The TPS22953QDQCRQ1 is supplied in a 10-pin WSON surface-mount package identified by the Texas Instruments package code DQC.

  • Package Type: WSON-10
  • Package Drawing: DQC
  • Package Body: 3.0mm × 2.0mm
  • Pin Count: 10
  • Lead Pitch: 0.5mm
  • Exposed Thermal Pad: Yes
  • Mounting Type: Surface Mount
  • Packaging: Large Tape and Reel
  • Standard Reel Quantity: 3,000 pieces
  • Operating Temperature: -40°C to +125°C
  • RoHS Compliance: Yes
  • Lead Finish: NiPdAu
  • Moisture Sensitivity: MSL 2
  • Peak Reflow Temperature: 260°C

The compact WSON package minimizes board space while providing a thermal path through its exposed pad. The exposed pad must be connected to ground according to the manufacturer's layout recommendations.

The DQC package is not interchangeable with a differently sized WSON footprint merely because the devices have the same pin count.

05

Pinout

The TPS22953QDQCRQ1 uses a 10-pin WSON configuration with separate switch input, bias supply, enable, voltage-sense, timing, and Power Good connections.

Pin Signal Function
1 IN Power-switch input. Bypass to ground using a suitable ceramic capacitor.
2 IN Additional power-switch input connection.
3 BIAS Bias supply for the internal control circuitry.
4 EN Active-high enable input; also supports adjustable UVLO through an external divider.
5 GND Device ground.
6 CT Output slew-rate control; connect an appropriate capacitor to ground.
7 PG Open-drain Power Good output.
8 SNS Voltage-supervisor sense input.
9 OUT Power-switch output.
10 OUT Additional power-switch output connection.
Thermal Pad GND Exposed thermal pad; connect to ground.
Pins 1–2: INSwitched power input; connect both pins to the input supply rail.
Pin 3: BIASSupplies internal control circuitry and gate-drive functions.
Pin 4: ENActive-high switch enable and UVLO control input.
Pin 5: GNDGround reference for the device.
Pin 6: CTExternal capacitor sets the output rise-time behavior.
Pin 7: PGOpen-drain power-good indication.
Pin 8: SNSMonitors a selected voltage through a resistor-divider network.
Pins 9–10: OUTSwitched output connections to the load.
Exposed Pad: GNDProvides thermal conduction and ground connection.

Pinout Note: This pin arrangement follows the official TI DQC package top-view diagram. The device uses EN, CT, SNS, PG, and BIAS pins rather than the simplified ON and dV/dT labels sometimes shown in generic load-switch illustrations.

Control Connections: Do not leave EN or SNS floating. Configure the required resistor dividers and control signals according to the intended undervoltage and Power Good thresholds.

Power Layout: Connect both IN pins to the input power plane and both OUT pins to the switched output plane. Use sufficient copper area and the exposed thermal pad to control temperature rise.

06

Specifications

Parameter Value
Part Number TPS22953QDQCRQ1
Manufacturer Texas Instruments
Product Family TPS22953-Q1
Device Type Automotive Load Switch
Channels 1
Internal Switch N-Channel MOSFET
Minimum Input Voltage 0.7V
Maximum Input Voltage 5.7V
Maximum Continuous Load Current 5A
Typical On-Resistance 14mΩ at VIN = 5V, VBIAS = 5V
Typical Quiescent Current 34µA
Typical Shutdown Current 5µA
Quiescent Current Limit 50µA under specified conditions
Enable Polarity Active High
Adjustable Rise Time Yes, through CT
Adjustable UVLO Yes
Voltage Supervisor Yes
Power Good Indicator Open Drain
Reverse-Current Blocking Yes, when disabled
Thermal Shutdown Yes
Defined Adjustable Current Limit No
AEC Qualification AEC-Q100 Grade 1
Operating Temperature -40°C to +125°C
Package WSON-10
Package Code DQC
Body Dimensions 3.0mm × 2.0mm
Pin Pitch 0.5mm
Exposed Thermal Pad Yes
Packaging Tape and Reel
Standard Reel Quantity 3,000
Product Status ACTIVE

Conduction Loss: Power dissipated in the switch can be approximated as P = I² × RON. At 5A and 14mΩ, the calculated conduction loss is approximately 0.35W. This calculation uses the typical resistance at specified conditions and does not represent a guaranteed maximum thermal load.

Voltage Drop: At 5A and 14mΩ, the calculated switch voltage drop is approximately 70mV. The actual value varies with supply voltage, temperature, and device characteristics.

Rise-Time Control: The CT capacitor adjusts how quickly the output voltage rises after enable. Slower transitions can reduce inrush current into capacitive loads but also increase the time required for the output to reach its operating voltage.

Reverse-Current Blocking: This function applies when the TPS22953-Q1 is disabled. Designers must not assume equivalent reverse-current behavior while the switch is enabled.

Thermal Design: The 5A rating does not eliminate the need for thermal evaluation. Continuous current capability depends on ambient temperature, PCB copper, package thermal resistance, and actual on-resistance.

Bias Supply: The BIAS pin powers internal control circuitry. Its operating limits and required decoupling must be checked separately from the switched IN voltage.

07

Equivalent

When evaluating a TPS22953QDQCRQ1 equivalent or replacement, engineers must consider more than current rating and package size. Reverse-current behavior, BIAS requirements, EN thresholds, UVLO configuration, PG behavior, CT timing, and automotive qualification can determine compatibility.

TPS22953DQCR: The commercial-grade version of the same TPS22953 load-switch family. It shares many core functions and the DQC package but is specified for a different temperature range and does not carry the same automotive qualification. It is not an automatic substitute for an automotive-qualified design.

TPS22954QDQCRQ1: A closely related automotive load switch using the same DQC package and similar power-management architecture. However, TPS22954-Q1 provides enhanced quick output discharge instead of the TPS22953-Q1 reverse-current-blocking feature. These devices are not functionally interchangeable in systems that depend on either behavior.

TPS22953-Q1 Family Variants: Verify alternative ordering suffixes and package options with TI before making a purchasing substitution. A matching silicon family does not guarantee identical package dimensions or manufacturing requirements.

Other Automotive Load Switches: Higher-current load switches, power-distribution switches, and automotive eFuses may offer similar power-control functions. They typically differ in pinout, protection features, startup behavior, and PCB requirements.

Replacement Recommendation: The original TPS22953QDQCRQ1 is the preferred choice when the existing design requires AEC-Q100 qualification and reverse-current blocking during shutdown. Alternative parts should be qualified electrically, thermally, mechanically, and functionally.

08

Manufacturer

Texas Instruments Incorporated develops analog and embedded semiconductor products for automotive, industrial, communications, and consumer electronics markets.

The TPS22953-Q1 belongs to TI's load-switch and power-distribution portfolio. Its integrated control, monitoring, and reverse-current-blocking functions are intended to simplify power-rail management in automotive electronic systems.

The TPS22953QDQCRQ1 is the automotive-grade DQC-package tape-and-reel ordering option.

Official Product Page: Texas Instruments TPS22953-Q1

Official Datasheet: TPS22953-Q1 and TPS22954-Q1 Datasheet

Manufacturer Website: www.ti.com

For procurement, verify the complete part number, automotive qualification, device marking, package type, moisture sensitivity, lead finish, date code, and authorized supply-chain traceability.

09

Applications

Automotive Infotainment

Controlled power switching for displays, interface modules, audio-related electronics, and peripheral subsystems.

Automotive ECUs

Power sequencing and selective power distribution for controller peripherals and local electronic modules.

Camera and Sensor Modules

Controlled startup of camera electronics and sensor supply rails with capacitive loads.

Telematics Systems

Load switching and supply monitoring for communication and connectivity modules.

ADAS Electronics

Managed power delivery to compatible low-voltage sensing and processing subsystems.

Power-Rail Sequencing

Controlled activation of multiple electronic loads using enable signals and Power Good feedback.

Typical Application Circuit: Connect the low-voltage source to both IN pins and the electronic load to both OUT pins. Supply the internal control circuitry through BIAS according to the manufacturer's operating requirements.

Connect EN to a host controller or a suitable resistor-divider network. Connect a capacitor between CT and ground to establish the required output rise time.

Use a resistor-divider network at SNS to establish the desired voltage-supervisor threshold. Connect PG to a compatible logic supply through an appropriate pull-up resistor because PG is an open-drain output.

Startup Sequence: After valid bias and enable conditions are established, the device turns on its internal MOSFET with the programmed slew rate. The output voltage rises toward the input voltage, and the supervisor monitors the configured sense level.

Power Good Monitoring: The PG output can provide feedback to a microcontroller or downstream power-management circuit. This enables a system to wait for acceptable supply conditions before activating dependent circuitry.

Reverse-Current Protection: When the switch is disabled, the TPS22953-Q1 blocks reverse current. This can be useful when output capacitors or downstream circuits remain energized while the upstream supply is removed.

Inrush-Current Management: For a capacitive load, the approximate charging current is proportional to capacitance and output-voltage slew rate. Increasing the programmed rise time can reduce the charging-current peak.

Thermal and PCB Layout: Use wide copper connections for IN and OUT, minimize high-current trace resistance, place decoupling capacitors near the device, and connect the exposed thermal pad to a suitable ground plane.

Automotive Design Consideration: The device is intended for low-voltage power rails, not direct connection to an unregulated 12V or 24V vehicle battery. Automotive battery transients, load dumps, and reverse-polarity events require appropriate upstream power conditioning and protection.

10

Disclaimer

This technical guide is provided for product identification, engineering reference, and procurement support. All specifications, pin assignments, electrical limits, bias-supply requirements, switching characteristics, current ratings, thermal performance, package dimensions, qualification details, and lifecycle information must be verified against the latest Texas Instruments documentation before design or purchase. Typical characteristics are not guaranteed maximum or minimum values unless explicitly specified by the manufacturer. The 5A continuous-current rating depends on operating and thermal conditions. Suggested alternatives are not guaranteed pin-compatible or functionally equivalent replacements. Automotive system-level qualification, protection design, and reliability validation remain the responsibility of the equipment manufacturer. Pricing and availability may change without notice.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```