TPS62590DRVR – 1A High-Efficiency Buck Converter | Datasheet, Pinout, Specifications & Applications
POWER MANAGEMENT IC · TECHNICAL GUIDE TPS62590DRVR – 1A High-Efficiency Synchronous Step-Down ConverterExplore the TPS62590DRVR from Texas Instruments, including its key benefits, electrical specific
- Part No.:
- TPS62590DRVR
- Manufacturer:
- Texas Instruments
- Package:
- 6-WDFN Exposed Pad
- Datasheet:
- TPS62590DRVR.pdf
- Description:
- IC REG BUCK ADJ 1A 6WSON
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
TPS62590DRVR – 1A High-Efficiency Buck Converter | Datasheet, Pinout, Specifications & Applications
TPS62590DRVR – 1A High-Efficiency Synchronous Step-Down Converter
Explore the TPS62590DRVR from Texas Instruments, including its key benefits, electrical specifications, WSON-6 package, pinout, equivalent options, manufacturer information, and applications in compact power management systems.
01. Product Introduction
The TPS62590DRVR is a high-efficiency, synchronous step-down DC-DC converter manufactured by Texas Instruments. Designed for battery-powered portable electronics and compact point-of-load power systems, the device supports input voltages from 2.5V to 5.5V and delivers up to 1A of output current under specified operating conditions.
Operating at a nominal switching frequency of 2.25MHz, the TPS62590DRVR enables the use of small external inductors and capacitors. Its compact 2mm × 2mm WSON package makes it suitable for applications where PCB space, power efficiency, and battery operating life are important design considerations.
The converter provides automatic power-save operation for improved light-load efficiency and an optional forced PWM operating mode for applications requiring predictable switching behavior.
02. Key Benefits
- Efficient Power Conversion: Synchronous rectification reduces losses compared with conventional nonsynchronous buck topologies.
- Compact Design: A 2mm × 2mm package and 2.25MHz switching frequency help reduce total solution size.
- Battery-Friendly Operation: A typical 15µA quiescent current supports low-power portable equipment.
- Flexible Output Voltage: An adjustable output supports multiple low-voltage supply rails.
- Light-Load Efficiency: Automatic power-save mode helps maintain efficiency as load current decreases.
- Low-Dropout Capability: 100% duty-cycle operation supports output regulation as the input voltage approaches the desired output voltage, subject to conduction losses.
03. Features
- High-efficiency synchronous buck converter architecture.
- Input voltage range: 2.5V to 5.5V.
- Output current capability up to 1000mA for VIN from 2.7V to 5.5V.
- 600mA specified output current for VIN from 2.5V to 2.7V.
- Adjustable output voltage from 0.75V up to VIN.
- Nominal switching frequency of 2.25MHz.
- Typical operating quiescent current of 15µA.
- Output voltage accuracy of ±2.5% in PWM mode under specified conditions.
- Automatic power-save mode at light loads.
- Selectable forced PWM operation through the MODE pin.
- 100% duty-cycle operation for low-dropout conditions.
- Enable control and low-current shutdown.
- Integrated current limiting and thermal protection.
04. Package
The TPS62590DRVR is supplied in a compact, surface-mount WSON package designed for space-constrained electronic assemblies.
| Part Number | TPS62590DRVR |
|---|---|
| Package Type | WSON-6 |
| Package Code | DRV |
| Package Dimensions | 2.0 × 2.0 × 0.8mm nominal |
| Number of Pins | 6, plus exposed thermal pad |
| Mounting Type | Surface Mount |
| Packaging | Tape and Reel |
| Standard Reel Quantity | 3000 units |
The exposed pad should be connected according to the manufacturer's recommended PCB layout and thermal guidelines. Proper grounding and component placement are important for stable switching operation.
05. Pinout
The TPS62590DRVR uses six functional pins and an exposed pad. The following table summarizes the pin assignments and their primary functions.
| Pin | Name | Description |
|---|---|---|
| 1 | SW | Switching node connected to the external inductor. |
| 2 | MODE | Operating mode selection. Low enables power-save operation; high selects forced PWM mode. |
| 3 | FB | Feedback input used to regulate the adjustable output voltage. |
| 4 | EN | Enable input. A high logic level enables the converter. |
| 5 | VIN | Input supply voltage connection. |
| 6 | GND | Ground reference. |
| Pad | PowerPAD | Exposed pad connected to ground according to TI layout recommendations. |
Design Note: The FB pin uses an external resistor divider to set the required output voltage. The feedback network, input capacitor, output capacitor, and inductor should be placed according to the official TI reference layout.
06. Specifications
The following electrical characteristics summarize the major parameters of the TPS62590DRVR.
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Part Number | TPS62590DRVR |
| Device Category | Power Management IC |
| Converter Type | Synchronous Step-Down (Buck) |
| Input Voltage | 2.5V – 5.5V |
| Output Voltage | Adjustable, 0.75V to VIN |
| Maximum Output Current | 1A (VIN ≥ 2.7V) |
| Output Current at Low VIN | 600mA (VIN 2.5V–2.7V) |
| Switching Frequency | 2.25MHz nominal |
| Quiescent Current | 15µA typical |
| Shutdown Current | 0.5µA typical |
| PWM Output Accuracy | ±2.5% under specified conditions |
| Operating Ambient Temperature | -40°C to +85°C |
| Package | 6-pin WSON (DRV) |
| Package Size | 2mm × 2mm |
Technical Consideration: The maximum output current depends on the input voltage and operating conditions. Thermal performance, inductor selection, output capacitance, and PCB layout must be evaluated for the intended application.
Official Datasheet: TPS62590 Texas Instruments Datasheet (PDF)
07. Equivalent
When evaluating a TPS62590DRVR equivalent or alternative, engineers should compare input voltage range, output current, switching frequency, operating modes, package dimensions, pin configuration, and external component requirements.
| Part Number | Relationship | Replacement Considerations |
|---|---|---|
| TPS62590DRVT | Same TPS62590 device and DRV package, different reel quantity. | Suitable ordering-code alternative subject to packaging requirements. |
| TPS62290 | Related Texas Instruments synchronous buck converter. | TI identifies this family as offering an improved feature set. Electrical and pin compatibility must be checked. |
Important: A functionally similar DC-DC converter is not necessarily a pin-to-pin replacement. Engineers must verify the latest datasheet, PCB footprint, feedback configuration, control behavior, and operating limits before substitution.
08. Manufacturer
Texas Instruments (TI) is a global semiconductor manufacturer specializing in analog integrated circuits, embedded processing, and power management technologies.
The TPS62590DRVR belongs to TI's family of compact switching regulators developed for efficient low-voltage power conversion. Its integrated power switches and selectable operating modes make it relevant to portable electronics and distributed power architectures.
For design verification, engineers should refer to the manufacturer's technical documentation, recommended operating conditions, reference circuits, and package drawings.
Manufacturer Website: Texas Instruments TPS62590 Product Information
09. Applications
The TPS62590DRVR is designed for compact electronic systems requiring efficient conversion from low-voltage DC power sources.
- Smartphones and Mobile Devices: Efficient conversion of battery voltage to regulated supply rails for internal circuitry.
- Tablet Computers: Compact power management for low-voltage electronic subsystems.
- Wireless LAN Equipment: Local voltage regulation for communication and networking circuits.
- Low-Power DSP Systems: Point-of-load power conversion for digital signal processing components.
- Battery-Powered Electronics: Low quiescent current and power-save operation for portable equipment.
- Embedded Systems: Adjustable voltage regulation for controllers, sensors, and peripheral circuits within the device's electrical limits.
Its combination of small package size, synchronous switching, and light-load power management can help designers balance efficiency, PCB area, and operating time in portable products.
10. Disclaimer
This product guide is provided for general technical reference and electronic component selection purposes. Specifications and operating conditions are based on publicly available manufacturer documentation and may be revised without notice.
All trademarks, manufacturer names, and product identifiers remain the property of their respective owners. References to alternative components do not establish guaranteed interchangeability.
Before purchasing or integrating the TPS62590DRVR into a design, verify the latest official Texas Instruments datasheet, product status, package information, and applicable design requirements.

