Home > The Posts > Product Guides > TPS62813QWRWYRQ1 TI 3A Automotive Buck Converter – Datasheet, Pinout, Specifications & Equivalent
TPS62813QWRWYRQ1 - Texas Instruments

TPS62813QWRWYRQ1 TI 3A Automotive Buck Converter – Datasheet, Pinout, Specifications & Equivalent

Product Technical Guide TPS62813QWRWYRQ1 Automotive Buck Converter Technical GuideTexas Instruments 3A synchronous step-down converter with 2.75V to 6V input, adjustable 0.6V to 5.5V output, and a comp…

In Stock 0 Available Inventory
Part No.:
TPS62813QWRWYRQ1
Manufacturer:
Texas Instruments
Package:
9-VFQFN
Datasheet:
TPS62813QWRWYRQ1.pdf
Description:
IC REG BUCK ADJ 3A 9VQFN
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

TPS62813QWRWYRQ1 TI 3A Automotive Buck Converter – Datasheet, Pinout, Specifications & Equivalent

Product Technical Guide
TPS62813QWRWYRQ1 Automotive Buck Converter Technical Guide

Texas Instruments 3A synchronous step-down converter with 2.75V to 6V input, adjustable 0.6V to 5.5V output, and a compact 9-pin VQFN-HR package.

Part NumberTPS62813QWRWYRQ1
ManufacturerTexas Instruments
Device TypeAutomotive Buck Converter
01

Product Introduction

The TPS62813QWRWYRQ1 is a 3A automotive-grade synchronous step-down DC/DC converter manufactured by Texas Instruments. It belongs to the TPS6281x-Q1 family of compact, high-efficiency switching regulators.

The device operates from a 2.75V to 6V input supply and supports an adjustable output voltage from 0.6V to 5.5V, subject to the input voltage and operating conditions.

Its peak-current-mode control architecture, integrated power switches, and adjustable switching frequency make it suitable for point-of-load power conversion in automotive electronics.

The TPS62813QWRWYRQ1 supports a continuous output current of up to 3A. Its switching frequency can be adjusted from 1.8MHz to 4MHz or synchronized to an external clock within the supported range.

The converter is supplied in a compact 2mm × 3mm VQFN-HR package with wettable flanks, supporting space-efficient PCB layouts and automotive assembly inspection.

02

Key Benefits

3A Output Capability

Supports demanding low-voltage power rails with up to 3A continuous output current.

Efficient Power Conversion

Integrated synchronous switches reduce external component requirements and support efficient regulation.

Flexible Power Management

Adjustable frequency, synchronization, soft start, and operating modes support different system requirements.

Automotive Qualification

AEC-Q100 qualification and wettable-flank packaging support automotive electronic designs.

03

Features

  • Automotive-qualified synchronous buck converter
  • 2.75V to 6V operating input voltage
  • Up to 3A continuous output current
  • Adjustable output voltage from 0.6V to 5.5V
  • ±1% output voltage accuracy in PWM operation under specified conditions
  • Adjustable switching frequency from 1.8MHz to 4MHz
  • External clock synchronization capability
  • Peak-current-mode control architecture
  • Typical 15µA quiescent current
  • Forced PWM or automatic PWM/PFM operating modes
  • 100% duty-cycle operating capability
  • Adjustable soft start and output tracking
  • Precision enable input for supply sequencing
  • Power-good output with window comparator
  • Active output discharge
  • AEC-Q100 Grade 1 qualification
  • Functional Safety-Capable documentation support
  • Compact 9-pin VQFN-HR package with wettable flanks

Variant Note: The exact TPS62813QWRWYRQ1 ordering option has adjustable output voltage, active output discharge, and spread-spectrum clocking disabled. Other TPS62813-Q1 suffix variants may have different factory-configured features.

04

Package

The TPS62813QWRWYRQ1 uses the RWY VQFN-HR package, a surface-mount package designed for compact power-management applications.

  • Package: VQFN-HR
  • Package Code: RWY
  • Pin Count: 9
  • Nominal Body Dimensions: 2mm × 3mm
  • Mounting: Surface Mount
  • Lead Feature: Wettable Flanks
  • Standard Packaging: Tape and Reel

The wettable-flank design can help with solder-joint inspection. For PCB layout, designers should follow TI's recommended land pattern, thermal guidance, and input/output capacitor placement instructions.

05

Pinout

The TPS62813QWRWYRQ1 integrates power-stage and control connections in its 9-pin RWY package. The following list describes the main signal functions; exact pad numbering and package orientation must be taken from the official TI datasheet.

VINInput supply connection.
SWSwitching-node connection to the external inductor.
GNDGround reference and power return.
FBOutput-voltage feedback for the adjustable version.
ENEnable input for converter control and sequencing.
PGPower-good status output.
SS/TRSoft-start and output-tracking control.
MODE/SYNCOperating-mode selection and external clock synchronization.
FSELSwitching-frequency selection or adjustment.

Use the manufacturer pin-function table and package drawing to confirm every physical pad, including any exposed or internally connected terminals. Incorrect connections may damage the device or prevent normal operation.

06

Specifications

Parameter Value
Part Number TPS62813QWRWYRQ1
Manufacturer Texas Instruments
Product Family TPS6281x-Q1
Device Type Synchronous Step-Down DC/DC Converter
Qualification AEC-Q100
Automotive Temperature Grade Grade 1
Input Voltage 2.75V to 6V
Output Voltage Adjustable, 0.6V to 5.5V
Maximum Continuous Output Current 3A
Switching Frequency 1.8MHz to 4MHz, adjustable
External Synchronization Supported
Control Architecture Peak Current Mode
Typical Quiescent Current 15µA
Output Accuracy ±1% in PWM mode under specified conditions
Operating Modes Forced PWM / Automatic PWM-PFM
Soft Start Adjustable
Power Good Yes
Output Discharge Enabled for this ordering option
Spread Spectrum Disabled for this ordering option
Operating Temperature -40°C to +125°C
Package VQFN-HR (RWY)
Pin Count 9
Package Dimensions 2mm × 3mm
Lead Design Wettable Flanks
Lifecycle Status ACTIVE (TI listing)

Engineering Note: The achievable output voltage, current, efficiency, and thermal performance depend on input supply, inductor selection, PCB layout, operating temperature, and switching frequency.

07

Equivalent

When evaluating a TPS62813QWRWYRQ1 equivalent or replacement, compare output-current rating, voltage range, package, control functions, synchronization, spread-spectrum settings, and automotive qualification.

TPS6281320QWRWYRQ1: A related 3A adjustable-output device in the TPS62813-Q1 family. Its spread-spectrum clocking configuration differs from the TPS62813QWRWYRQ1, so it should not be treated as an unconditional replacement.

TPS62812QWRWYRQ1: A related 2A family device that may be considered for lower-current designs. It is not a suitable substitute where the full 3A output capability is required.

TPS62810QWRWYRQ1: A related 4A family device offering greater output-current capability. Its electrical and thermal requirements must be checked before substitution.

Replacement Guidance: For an existing automotive PCB, using the exact TPS62813QWRWYRQ1 part number is the lowest-risk procurement choice. Any alternative requires verification of the pinout, external components, electrical behavior, qualification, and system-level testing.

08

Manufacturer

Texas Instruments Incorporated (TI) is a semiconductor manufacturer supplying analog, embedded-processing, and power-management components for automotive, industrial, communications, and electronic equipment.

The TPS62813-Q1 belongs to TI's automotive DC/DC converter portfolio and is intended for compact point-of-load power designs.

Official Product Page: TPS62813QWRWYRQ1 – Texas Instruments

Official Datasheet: TPS6281x-Q1 Automotive Step-Down Converter Datasheet

Consult TI documentation for the latest revision, recommended operating conditions, package drawings, application schematics, and design recommendations.

09

Applications

Automotive Infotainment

Local low-voltage power rails for processors, interfaces, and multimedia subsystems.

ADAS Electronics

Point-of-load regulation for sensing and processing modules in driver-assistance systems.

Embedded Processing

Power conversion for automotive microcontrollers, processors, and peripheral circuits.

Communication Modules

Regulated supply rails for in-vehicle communication and interface electronics.

Automotive Control Units

Compact power supplies for electronic control and monitoring functions.

Point-of-Load Power

Efficient conversion from intermediate supply rails to lower-voltage loads.

10

Disclaimer

This technical guide is intended for product identification and general engineering reference. Electrical specifications, pin assignments, operating limits, qualification status, lifecycle information, and application requirements must be verified against the latest official Texas Instruments datasheet. Equivalent and alternative devices are suggestions for engineering evaluation only and are not guaranteed direct replacements. Pricing and inventory availability are subject to change.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```