Home > The Posts > Product Guides > TPS73701DRBR – 1A Ultra-Low Dropout Voltage Regulator | Datasheet, Pinout & Specifications
TPS73701DRBR - Texas Instruments

TPS73701DRBR – 1A Ultra-Low Dropout Voltage Regulator | Datasheet, Pinout & Specifications

POWER MANAGEMENT IC · TECHNICAL GUIDE TPS73701DRBR – 1A Ultra-Low Dropout Linear Voltage RegulatorComplete technical guide to the Texas Instruments TPS73701DRBR, covering features, VSON-8 package, pi…

In Stock 8,831 Available Inventory
Part No.:
TPS73701DRBR
Manufacturer:
Texas Instruments
Package:
8-VDFN Exposed Pad
Datasheet:
TPS73701DRBR.pdf
Description:
IC REG LINEAR POS ADJ 1A 8SON
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

TPS73701DRBR – 1A Ultra-Low Dropout Voltage Regulator | Datasheet, Pinout & Specifications

POWER MANAGEMENT IC · TECHNICAL GUIDE

TPS73701DRBR – 1A Ultra-Low Dropout Linear Voltage Regulator

Complete technical guide to the Texas Instruments TPS73701DRBR, covering features, VSON-8 package, pin configuration, electrical specifications, equivalent options, manufacturer information, and applications.

Texas Instruments 1A Adjustable LDO VSON-8 · 3 × 3mm

01. Product Introduction

The TPS73701DRBR is a 1A adjustable-output, ultra-low dropout linear voltage regulator manufactured by Texas Instruments. Designed for applications requiring reliable voltage regulation, fast transient response, and compact power management, this device operates across a 2.2V to 5.5V input voltage range.

Unlike switching DC-DC converters, the TPS73701DRBR uses a linear regulation architecture with an NMOS pass transistor. This design eliminates switching-frequency ripple generated by the regulator itself and provides stable output regulation with a minimum 1µF ceramic output capacitor.

The integrated reverse current protection characteristics, enable control, thermal shutdown, and foldback current limiting make the TPS73701DRBR suitable for embedded systems, portable electronics, communication equipment, and point-of-load regulation.

Its 8-pin VSON package measures only 3mm × 3mm, supporting compact PCB layouts and space-efficient electronic designs.

02. Key Benefits

  • Ultra-Low Dropout: Typical dropout voltage of 130mV at 1A for legacy silicon and 122mV for newer silicon.
  • High Output Current: Supports up to 1A regulated output current under specified operating and thermal conditions.
  • Compact Footprint: 3mm × 3mm VSON package reduces PCB space requirements.
  • Fast Transient Response: Maintains stable operation during rapid changes in load current.
  • Flexible Output Adjustment: External feedback resistors allow the output voltage to be configured for different power rails.
  • Reverse Current Protection: NMOS topology helps reduce unwanted reverse current when the output voltage exceeds the input voltage.
  • Low Shutdown Consumption: Less than 20nA typical shutdown current.
  • Simple External Circuit: Stable operation with a ceramic output capacitor of 1µF or greater.

03. Features

  • 1A low-dropout linear regulator.
  • Input voltage range from 2.2V to 5.5V.
  • Adjustable output voltage with 1.2V nominal feedback reference.
  • Typical dropout voltage of 130mV or 122mV at 1A, depending on silicon revision.
  • Initial output accuracy of 1%.
  • Overall output accuracy of 3% for legacy silicon and 1.5% for newer silicon.
  • Stable with 1µF or larger ceramic output capacitors.
  • NMOS pass transistor architecture.
  • Low reverse leakage current.
  • Integrated enable and shutdown control.
  • Thermal shutdown protection.
  • Foldback overcurrent protection.
  • Operating temperature range from -40°C to +125°C.
  • Compact 8-pin VSON surface-mount package.

04. Package

The TPS73701DRBR is supplied in a compact 8-pin VSON package with an exposed thermal pad. The package is suitable for automated surface-mount assembly and high-density electronic circuit designs.

Package Parameter Description
Part Number TPS73701DRBR
Package Type VSON-8
Package Code DRB
Package Dimensions 3.0mm × 3.0mm
Number of Pins 8
Exposed Pad Yes, connected to ground
Mounting Type Surface Mount
Packaging Tape and Reel
Standard Reel Quantity 3000 pieces
Device Marking BZN

For optimal thermal performance, the exposed pad should be connected to an appropriate PCB ground plane using the layout recommendations provided in the manufacturer datasheet.

05. Pinout

The TPS73701DRBR features eight pins and an exposed thermal pad. The following pin assignments correspond to the DRB VSON package.

Pin Symbol Function
1 OUT Regulated output voltage connection.
2 NC No internal connection.
3 FB Feedback input for adjustable output voltage regulation.
4 GND Ground reference.
5 EN Enable input. High enables the regulator; low selects shutdown.
6 NC No internal connection.
7 NC No internal connection.
8 IN Unregulated input supply.
Pad GND Exposed thermal pad connected to ground.

Design Note: The EN pin must not be left floating. If independent enable control is unnecessary, it can be connected to the input supply. The FB pin should be connected to the output voltage divider according to the official adjustable-output application circuit.

06. Specifications

The following table summarizes the primary electrical and mechanical characteristics of the TPS73701DRBR.

Parameter Value
Manufacturer Texas Instruments
Part Number TPS73701DRBR
Product Category Linear Voltage Regulator
Regulator Type Positive Adjustable LDO
Input Voltage Range 2.2V – 5.5V
Output Voltage Adjustable, nominally 1.2V and above
Maximum Output Current 1A
Dropout Voltage at 1A 130mV typical (legacy); 122mV typical (new silicon)
Initial Accuracy 1%
Overall Accuracy 3% legacy; 1.5% new silicon
Quiescent Current 0.4mA typical
Shutdown Current Less than 20nA typical
Minimum Output Capacitance 1µF
Operating Temperature -40°C to +125°C
Package VSON-8 (DRB)
Package Size 3mm × 3mm
Product Status ACTIVE (manufacturer listing)

Thermal Consideration: The actual deliverable output current depends on input-to-output voltage difference, ambient temperature, PCB copper area, and thermal resistance. Designers should calculate power dissipation using P = (VIN - VOUT) × IOUT, with ground-current losses considered when necessary.

Official Datasheet: TPS737 Texas Instruments Datasheet (PDF)

07. Equivalent

When selecting a TPS73701DRBR equivalent or alternative, engineers should evaluate electrical compatibility, dropout voltage, output current capability, package footprint, enable behavior, thermal performance, and external component requirements.

Part Number Relationship Compatibility Notes
TPS73701DRBT Same adjustable regulator and DRB package, supplied in a smaller tape-and-reel quantity. Suitable packaging alternative with the same device configuration.
TPS73701DRBRG4 Related ordering code for the same regulator. Listed by TI as identical to TPS73701DRBR.
TPS73701DRVR Same regulator family in a smaller WSON-6 package. Different package dimensions and pinout; PCB redesign is required.
TPS7A37 Alternative TI 1A LDO family offering higher overall accuracy. Requires electrical, mechanical, and application-level compatibility verification.

Replacement Guidance: TPS73701DRBT is the most straightforward packaging alternative. Other LDO devices should not be considered direct pin-to-pin substitutes without checking the manufacturer's documentation and PCB requirements.

08. Manufacturer

Texas Instruments (TI) is a semiconductor manufacturer specializing in analog integrated circuits, embedded processing, and power management technologies.

The TPS73701DRBR belongs to the TPS737 low-dropout regulator family, which combines NMOS linear regulation, reverse current protection characteristics, and fast transient response.

TI provides datasheets, package drawings, evaluation resources, and application documentation to support the selection and integration of this device.

Manufacturer Product Page: TPS73701DRBR – Texas Instruments

09. Applications

The TPS73701DRBR is suitable for applications requiring stable low-voltage power rails, low dropout performance, and compact linear regulation.

  • Embedded Control Systems: Provides regulated power for microcontrollers, digital control circuits, and supporting electronics.
  • Communication Equipment: Supports local voltage regulation for networking and signal-processing subsystems.
  • Portable Electronics: Offers compact power regulation with low shutdown consumption.
  • Industrial Electronics: Supplies regulated low-voltage rails for controllers, monitoring circuits, and interface electronics.
  • Analog Signal Processing: Can provide a linear-regulated supply for analog circuitry where output noise and transient behavior are important.
  • Point-of-Load Regulation: Converts an existing DC supply into a lower regulated voltage close to the load.
  • Battery-Powered Systems: Helps maintain regulated operation as battery voltage changes, provided sufficient input headroom remains.

For applications requiring high conversion efficiency across large input-to-output voltage differences, a switching buck regulator may be more appropriate. The TPS73701DRBR is particularly useful when simplicity, low dropout, and linear regulation are design priorities.

10. Disclaimer

This technical guide is intended for product research, component selection, and general engineering reference. Specifications are based on manufacturer information and may change without notice.

Electrical characteristics can vary with silicon revision, operating conditions, and device configuration. All equivalent and alternative components must be independently verified before use.

Texas Instruments and associated product names are trademarks of their respective owners. Always consult the latest official datasheet, package documentation, and manufacturer product information before purchasing or integrating the TPS73701DRBR into an electronic design.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```