Home > The Posts > Product Guides > UCC27517ADBVR TI 4A Gate Driver – Datasheet, Pinout, Specifications, Equivalent & Applications
UCC27517ADBVR - Texas Instruments

UCC27517ADBVR TI 4A Gate Driver – Datasheet, Pinout, Specifications, Equivalent & Applications

Product Technical Guide UCC27517ADBVR High-Speed Low-Side Gate Driver Technical GuideExplore the Texas Instruments UCC27517ADBVR, a single-channel 4A source and 4A sink gate driver with 4.5V to 18V ope…

In Stock 0 Available Inventory
Part No.:
UCC27517ADBVR
Manufacturer:
Texas Instruments
Package:
SC-74A, SOT-753
Datasheet:
UCC27517ADBVR.pdf
Description:
IC GATE DRVR LOW-SIDE SOT23-5
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

UCC27517ADBVR TI 4A Gate Driver – Datasheet, Pinout, Specifications, Equivalent & Applications

Product Technical Guide
UCC27517ADBVR High-Speed Low-Side Gate Driver Technical Guide

Explore the Texas Instruments UCC27517ADBVR, a single-channel 4A source and 4A sink gate driver with 4.5V to 18V operation, 13ns typical propagation delay, dual logic inputs, and negative input-voltage capability.

Part NumberUCC27517ADBVR
ManufacturerTexas Instruments
Device TypeLow-Side Gate Driver
01

Product Introduction

The UCC27517ADBVR is a single-channel, high-speed, low-side gate driver manufactured by Texas Instruments. It is designed to drive the capacitive gate terminals of power MOSFETs, IGBTs, and compatible wide-bandgap switching devices.

Operating from a 4.5V to 18V supply, the UCC27517A delivers symmetrical 4A peak source and 4A peak sink current at the specified test conditions. This strong gate-drive capability supports rapid charging and discharging of power-transistor gate capacitances.

Its typical propagation delay of 13ns, together with 9ns typical rise time and 7ns typical fall time, makes the device suitable for high-frequency switching circuits where timing performance is important.

A distinctive feature of the UCC27517A is its ability to tolerate negative input voltages down to -5V, helping accommodate transient undershoot in electrically noisy power-conversion environments.

The device also provides separate IN+ and IN- inputs, allowing either non-inverting or inverting operation. The unused input can serve as an enable or disable control when correctly biased.

The UCC27517ADBVR is available in a compact 5-pin SOT-23 package, making it suitable for space-constrained switching power supplies, industrial converters, and motor-drive circuitry.

02

Key Benefits

Strong Gate-Drive Capability

Symmetrical 4A source and sink peak currents enable rapid switching of compatible MOSFET and IGBT gates.

High-Speed Switching

A 13ns typical propagation delay supports responsive gate control in high-frequency power electronics.

Improved Noise Tolerance

Negative input-voltage capability, hysteretic thresholds, and undervoltage lockout support robust control.

Flexible Input Configuration

Separate inverting and non-inverting inputs simplify integration with different PWM controllers.

03

Features

  • Single-channel high-speed low-side gate driver
  • 4.5V to 18V operating supply-voltage range
  • 4A peak source-current capability
  • 4A peak sink-current capability
  • 13ns typical propagation delay
  • 9ns typical output rise time
  • 7ns typical output fall time
  • Negative input-voltage tolerance down to -5V
  • Dual input structure supporting inverting and non-inverting configurations
  • TTL- and CMOS-compatible input thresholds
  • Input logic thresholds independent of VDD supply voltage
  • Hysteretic input logic for improved noise immunity
  • Integrated VDD undervoltage lockout
  • Output held low during undervoltage lockout
  • Internal input biasing for defined output behavior
  • Unused input can provide enable or disable control
  • Rail-to-rail output-drive capability
  • Output architecture designed to minimize internal shoot-through current
  • Suitable for driving MOSFETs, IGBTs, and compatible GaN power switches
  • Compact 5-pin SOT-23 surface-mount package
  • RoHS-compliant orderable device

Design Note: The 4A ratings describe peak gate-drive pulses, not a continuous 4A load-current capability. Average driver dissipation depends on switching frequency, gate charge, supply voltage, and output-stage losses.

04

Package

The UCC27517ADBVR is supplied in the Texas Instruments DBV SOT-23-5 package.

  • Package Type: SOT-23
  • Package Code: DBV
  • Pin Count: 5
  • Nominal Package Footprint: 2.9mm × 2.8mm
  • Mounting Type: Surface Mount
  • Orderable Packaging: Tape and Reel
  • Standard Reel Quantity: 3,000 pieces
  • Moisture Sensitivity Level: MSL 1
  • RoHS: Compliant

The compact package supports short gate-drive traces when the driver is positioned close to the power transistor.

For reliable operation, designers should place the VDD bypass capacitor near the supply and ground pins and minimize inductance in the gate-drive loop.

Use the official TI mechanical drawing for footprint dimensions, terminal spacing, and soldering recommendations.

05

Pinout

The UCC27517ADBVR pinout uses five terminals for supply, ground, dual control inputs, and gate-drive output.

Pin Name Function
1 VDD Gate-driver bias supply input, 4.5V to 18V.
2 GND Ground reference for driver and control signals.
3 IN+ Non-inverting logic input.
4 IN- Inverting logic input.
5 OUT High-current gate-drive output.
VDDBias supply for the gate-driver output stage.
GNDDriver ground and control reference.
IN+Non-inverting PWM control input.
IN-Inverting PWM control input.
OUTGate-drive output connected to the power transistor through an appropriate gate network.

Non-Inverting Operation: Apply the PWM signal to IN+ and connect IN- to GND.

Inverting Operation: Apply the PWM signal to IN- and connect IN+ to VDD.

Important: Do not leave the unused input floating. The internal input biasing holds the output low under floating-input conditions, so the unused input must be correctly biased for normal operation.

Confirm package orientation and pin numbering against the official TI DBV top-view diagram before PCB layout.

06

Specifications

Parameter Value
Part Number UCC27517ADBVR
Manufacturer Texas Instruments
Product Family UCC27517A
Device Type Low-Side Gate Driver
Channels 1
Compatible Power Switches MOSFET, IGBT, Compatible GaN FET
Operating Supply Voltage 4.5V to 18V
Peak Source Current 4A
Peak Sink Current 4A
Typical Propagation Delay 13ns
Typical Rise Time 9ns
Typical Fall Time 7ns
Negative Input Capability -5V
Input Logic TTL / CMOS Compatible
Input Configuration Inverting or Non-Inverting
Input Hysteresis 1V Typical
UVLO Rising Threshold 4.2V Typical
UVLO Falling Threshold 3.9V Typical
Typical Output Pull-Up Resistance 5Ω at VDD = 12V
Typical Output Pull-Down Resistance 0.5Ω at VDD = 12V
Operating Temperature, Orderable Device -40°C to +125°C
Package SOT-23 (DBV)
Pin Count 5
Package Footprint 2.9mm × 2.8mm
Packaging Tape and Reel
Standard Reel Quantity 3,000
RoHS Compliance Yes
Product Status ACTIVE

Temperature Note: The family datasheet describes device electrical operation across a wider characterized temperature range, while the UCC27517ADBVR ordering entry specifies -40°C to +125°C. Use the exact orderable-device limits for procurement and application qualification.

Switching Note: Propagation delay, rise time, and fall time are measured under specified test conditions and will vary with supply voltage, load capacitance, temperature, and layout.

07

Equivalent

When searching for a UCC27517ADBVR equivalent, replacement, or alternative, evaluate peak source and sink currents, supply voltage, propagation delay, input logic, negative-voltage tolerance, UVLO behavior, package pinout, and temperature requirements.

UCC27517ADBVT: The same UCC27517A device in the DBV package with a smaller tape-and-reel carrier quantity. It is a practical purchasing alternative when the smaller reel quantity is preferred.

UCC27517DBVR: A related 4A source and 4A sink low-side driver with a similar input structure and 5-pin SOT-23 package. The UCC27517A specifically includes negative input-voltage capability, so the standard UCC27517 must not be assumed to provide identical negative-input performance.

UCC27517ADBVQ1: An automotive-qualified member of the related gate-driver family. Automotive qualification and ordering differences should be reviewed before selection.

UCC27516DRSR: A related 4A/4A driver with a 6-pin WSON package. Its different physical package prevents direct footprint substitution.

Replacement Recommendation: For an existing PCB, prioritize the exact UCC27517ADBVR. Any alternative must be checked for pin compatibility, input biasing, gate-drive current, supply thresholds, switching timing, and thermal performance.

Equivalent family membership does not guarantee direct interchangeability.

08

Manufacturer

Texas Instruments Incorporated (TI) manufactures analog and embedded semiconductor products for power management, industrial automation, communications, automotive electronics, and other applications.

The UCC27517A belongs to TI's high-speed gate-driver portfolio and is designed to provide the peak current required to switch external power transistors efficiently.

Official Product Page: UCC27517ADBVR – Texas Instruments

Official Datasheet: UCC27517A High-Speed Low-Side Gate Driver Datasheet

Product Status: ACTIVE according to the TI ordering information.

Engineers should consult the latest TI documentation for electrical limits, recommended operating conditions, application schematics, thermal characteristics, and package drawings.

09

Applications

Switch-Mode Power Supplies

High-speed gate driving for MOSFETs used in switching converters and power-regulation stages.

Motor Control

Low-side gate driving in suitable industrial motor-control and inverter power stages.

Solar Power Conversion

Gate-drive support for compatible power-switching circuits in solar converters and energy systems.

Industrial Power Electronics

High-frequency switching control in industrial converters and regulated power equipment.

Wide-Bandgap Power Devices

Driving compatible GaN switching devices where voltage, current, and gate-drive requirements are satisfied.

DC/DC Converters

External power-transistor control in synchronous and asynchronous converter designs using appropriate driver placement.

Application Note: The UCC27517ADBVR is a low-side gate driver. High-side switching arrangements may require a different driver architecture or an appropriate isolated or floating supply configuration.

10

Disclaimer

This technical guide is intended for product identification, engineering reference, and procurement support. All electrical specifications, pin assignments, timing characteristics, temperature ratings, compliance information, and lifecycle status must be verified against the latest official Texas Instruments documentation before design or purchase. Suggested equivalent devices are provided for engineering evaluation only and are not guaranteed direct replacements. Product pricing and inventory availability are subject to change.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```