Home > The Posts > Product Guides > UCC28C43DR Datasheet, Pinout, Specifications, Equivalent & Applications | TI PWM Controller
UCC28C43DR - Texas Instruments

UCC28C43DR Datasheet, Pinout, Specifications, Equivalent & Applications | TI PWM Controller

Electronic Component Technical GuideUCC28C43DR – 1MHz Low-Power Current-Mode PWM ControllerThe UCC28C43DR is an industrial-grade BiCMOS current-mode PWM controller manufactured by Texas Instruments. I…

In Stock 0 Available Inventory
Part No.:
UCC28C43DR
Manufacturer:
Texas Instruments
Package:
8-SOIC (0.154", 3.90mm Width)
Datasheet:
UCC28C43DR.pdf
Description:
IC REG CTRLR MULT TOPOLOGY 8SOIC
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

UCC28C43DR Datasheet, Pinout, Specifications, Equivalent & Applications | TI PWM Controller

Electronic Component Technical Guide

UCC28C43DR – 1MHz Low-Power Current-Mode PWM Controller

The UCC28C43DR is an industrial-grade BiCMOS current-mode PWM controller manufactured by Texas Instruments. It features up to 1MHz oscillator frequency, nearly 100% duty-cycle capability, ±1A peak MOSFET gate-drive current, low startup consumption, and an 8-pin SOIC package for switched-mode power supply applications.

Manufacturer: Texas Instruments Frequency: Up to 1MHz Package: SOIC-8

01. Product Introduction

The UCC28C43DR is a high-performance, low-power, current-mode pulse-width modulation (PWM) controller developed by Texas Instruments for switched-mode power supply applications.

It belongs to the UCCx8C4x family of BiCMOS PWM controllers, designed as enhanced alternatives to traditional UC384x and UC384xA current-mode controller families.

The UCC28C43DR combines fixed-frequency PWM control, cycle-by-cycle current limiting, an integrated error amplifier, a programmable oscillator, and a high-current output driver in a compact integrated circuit.

Its oscillator can operate at frequencies up to 1MHz, allowing designers to evaluate higher switching frequencies for reducing the size of external magnetic components and output filters.

The device supports nearly 100% maximum duty cycle, making it suitable for converter topologies that require a wide duty-cycle operating range.

With an industrial operating temperature range of -40°C to +125°C and an 8-pin SOIC package, the UCC28C43DR is suitable for power conversion and industrial electronic control applications.

Product Overview:

  • Part Number: UCC28C43DR
  • Manufacturer: Texas Instruments
  • Product Family: UCC28C4x
  • Device Type: Current-Mode PWM Controller
  • Technology: BiCMOS
  • Maximum Oscillator Frequency: 1MHz
  • Maximum Duty Cycle: Nearly 100%
  • UVLO Thresholds: 8.4V Turn-On / 7.6V Turn-Off, nominal
  • Peak Output Drive Current: ±1A
  • Typical Startup Current: 50µA
  • Typical Operating Current: 2.3mA at 52kHz
  • Package: SOIC-8
  • Operating Temperature: -40°C to +125°C

02. Key Benefits

High-Frequency PWM Operation

The UCC28C43DR supports oscillator frequencies up to 1MHz. Higher switching frequency can reduce magnetic component size, although switching losses, electromagnetic interference, and thermal performance must be evaluated.

Low Startup Current

With a typical startup current of 50µA, the controller helps reduce startup power requirements in suitable power supply designs.

Low Operating Power Consumption

Its typical operating current of 2.3mA at 52kHz helps limit controller overhead and can improve overall system efficiency.

High-Current MOSFET Gate Driver

The integrated output stage can source and sink peak currents of approximately 1A, allowing direct driving of suitable external power MOSFETs.

Fast Overcurrent Response

A typical current-sense-to-output propagation delay of 35ns enables rapid cycle-by-cycle current limiting.

Wide Duty-Cycle Capability

Unlike PWM controller variants limited to approximately 50% duty cycle, the UCC28C43 supports operation approaching 100% duty cycle.

Industry-Standard Architecture

The device offers functional and pin compatibility with relevant UC384x controller families, simplifying selected redesign and upgrade projects.

03. Features

  • BiCMOS low-power current-mode PWM controller.
  • Programmable fixed-frequency oscillator.
  • Maximum oscillator frequency of 1MHz.
  • Nearly 100% maximum duty-cycle operation.
  • Typical startup current of 50µA.
  • Maximum startup current of 100µA.
  • Typical operating current of 2.3mA at 52kHz.
  • Peak MOSFET gate-drive capability of ±1A.
  • Typical output rise time of 25ns.
  • Typical output fall time of 20ns.
  • Fast 35ns current-sense-to-output delay.
  • Cycle-by-cycle overcurrent limiting.
  • Internally trimmed 2.5V error-amplifier reference with ±1% accuracy.
  • 5V reference output for oscillator and supporting circuitry.
  • Programmable oscillator timing and dead time.
  • Undervoltage lockout protection.
  • Industrial temperature operation from -40°C to +125°C.
  • Compact 8-pin SOIC surface-mount package.

Peak Current-Mode Control

The controller monitors a current-sense signal during each switching cycle and terminates the power switch conduction interval when the control threshold is reached.

This architecture provides direct control of peak switch current and supports fast response to changing load conditions.

Oscillator Programming

External timing resistor and capacitor components connected to RT/CT determine the oscillator operating frequency.

The UCC28C43 output switching frequency is equal to its oscillator frequency.

Undervoltage Lockout

UVLO prevents normal switching operation until the controller bias supply reaches its turn-on threshold. The output is held low when the supply is below the required operating threshold.

04. Package

The UCC28C43DR is supplied in an 8-pin SOIC package, designated D by Texas Instruments.

Package Attribute Description
Package Type SOIC-8
TI Package Code D
Number of Pins 8
Nominal Body Dimensions 4.90 × 3.91mm
Mounting Surface Mount
Package Marking 28C43
Packaging Tape and Reel
Standard Reel Quantity 2,500 Pieces
Moisture Sensitivity MSL 1

The SOIC-8 package is suitable for automated PCB assembly and reflow soldering.

Its standardized mechanical dimensions simplify integration into industrial power supply control boards.

PCB layout should provide short connections for the current-sense signal, gate-drive output, reference bypass capacitor, and controller ground.

For production layouts, designers should use the official TI package drawing and recommended land pattern.

05. Pinout

The UCC28C43DR uses eight terminals for feedback compensation, voltage sensing, current sensing, oscillator timing, power supply, and MOSFET gate driving.

Pin Name Function
1 COMP Error amplifier output and compensation connection
2 FB Voltage feedback input
3 CS Current-sense input
4 RT/CT Oscillator timing resistor and capacitor connection
5 GND Ground return
6 OUT MOSFET gate-drive output
7 VDD Controller bias supply input
8 VREF 5V reference output

UCC28C43DR SOIC-8 Pin Configuration – Top View:

          UCC28C43DR
             SOIC-8

       _____________
 COMP 1|           |8 VREF
 FB   2|           |7 VDD
 CS   3|           |6 OUT
 RT/CT4|___________|5 GND

  

Functional Connections:

  • COMP: Connects to the compensation network or external feedback-control circuitry.
  • FB: Receives voltage feedback for regulation.
  • CS: Monitors the switch-current sense signal.
  • RT/CT: Sets the oscillator frequency through external timing components.
  • GND: Provides the controller ground reference.
  • OUT: Drives the gate of an external switching MOSFET.
  • VDD: Supplies the controller and output driver.
  • VREF: Provides the regulated reference for the timing network.

For stable operation, TI recommends local VDD and VREF bypass capacitors with short connections to ground.

The timing capacitor and current-sense circuitry should be routed carefully to reduce switching noise interference.

06. Specifications

The following specifications summarize the main UCC28C43DR characteristics from Texas Instruments technical documentation.

Parameter Symbol Value
Manufacturer - Texas Instruments
Part Number - UCC28C43DR
Controller Type - Current-Mode PWM
Control Technology - BiCMOS
Maximum Oscillator Frequency fOSC 1MHz
Maximum Duty Cycle DMAX Nearly 100%
UVLO Turn-On Threshold VDD(on) 8.4V Nominal
UVLO Turn-Off Threshold VDD(off) 7.6V Nominal
Maximum Supply Voltage VDD 20V Product Rating
Typical Startup Current IDD(start) 50µA
Maximum Startup Current IDD(start) 100µA
Typical Operating Current IDD 2.3mA at 52kHz
Peak Output Source Current IOUT 1A
Peak Output Sink Current IOUT 1A
Typical Output Rise Time tr 25ns
Typical Output Fall Time tf 20ns
Current-Sense Propagation Delay tPD 35ns Typical
Error Amplifier Reference VFB 2.5V ±1%
Reference Output VREF 5V Nominal
Operating Temperature TA -40°C to +125°C
Package - SOIC-8
Package Code - D

Understanding Switching Frequency

The oscillator frequency is determined by external RT and CT components. The maximum supported oscillator frequency is 1MHz, but the actual switching frequency should be selected according to converter efficiency, magnetic design, MOSFET switching losses, and EMI requirements.

Understanding the UVLO Thresholds

The nominal turn-on threshold is 8.4V, while the nominal turn-off threshold is 7.6V.

This hysteresis helps prevent repeated switching during marginal supply conditions.

Current-Mode Control

The current-sense signal is compared against a control threshold derived from the error amplifier output. When the threshold is reached, the PWM controller terminates the corresponding switching pulse.

Current-sense filtering, slope compensation, and feedback-loop stability should be evaluated for the selected converter topology.

Official Datasheet: Texas Instruments UCCx8C4x Datasheet PDF

07. Equivalent

When selecting a UCC28C43DR equivalent, engineers should compare undervoltage lockout thresholds, maximum duty cycle, switching frequency, supply current, gate-drive strength, pin configuration, and package compatibility.

Texas Instruments identifies the UCC28C53 as a newer device offering upgraded functionality and a drop-in replacement path for the UCC28C43.

Part Number Relationship Replacement Consideration
UCC28C43DR Original device SOIC-8 current-mode PWM controller
UCC28C43D Same device family Verify ordering and packaging format
UCC28C43DGKR Same controller, different package VSSOP-8; PCB footprint differs
UCC28C53 TI-recommended upgraded replacement Higher supply voltage capability and lower power consumption; verify package-specific ordering code
UC3843A Legacy controller family Check electrical characteristics and timing requirements
UCC38C43 Related controller variant Different specified operating temperature range

Replacement Selection Checklist:

  • Compatible current-mode PWM architecture.
  • Matching UVLO turn-on and turn-off requirements.
  • Equivalent maximum duty-cycle capability.
  • Suitable oscillator and switching frequency range.
  • Compatible MOSFET gate-drive output characteristics.
  • Appropriate startup and operating current.
  • Compatible feedback and compensation characteristics.
  • Matching SOIC-8 pin configuration and footprint.
  • Acceptable operating temperature range.
  • Compatible current-sense thresholds and protection behavior.

Although certain UC3843-family controllers are pin-compatible, differences in startup current, timing, current-sense behavior, and electrical performance may require additional engineering validation.

Important: Always confirm the complete manufacturer ordering code and current datasheet before approving a substitute for production use.

08. Manufacturer

The UCC28C43DR is manufactured by Texas Instruments, a semiconductor company specializing in analog and embedded processing technologies.

Texas Instruments provides power management integrated circuits, switching controllers, gate drivers, amplifiers, interface devices, and embedded processing products.

The UCC28C43DR belongs to the company's low-power current-mode PWM controller portfolio.

Manufacturer Information:

For procurement, buyers should confirm the full manufacturer ordering code, package marking, tape-and-reel quantity, product traceability, and quality documentation.

Current inventory and pricing should be verified with the selected supplier.

09. Applications

The UCC28C43DR is suitable for fixed-frequency, peak current-mode switching power supplies and related power conversion applications.

1. Flyback Power Converters

The controller can be used in flyback converter designs where an external MOSFET controls energy transfer through a transformer.

Its current-sense input and feedback architecture support regulated power conversion with cycle-by-cycle current limiting.

2. Boost DC/DC Converters

The UCC28C43DR can control boost converters that generate an output voltage higher than the input supply.

Its wide duty-cycle capability is useful for applications requiring substantial step-up conversion ratios.

3. Buck Converters

The controller can be implemented in suitable buck converter topologies with appropriate external gate-drive and power-stage arrangements.

4. Forward Converters

The UCC28C43DR can support forward converter designs requiring transformer isolation and controlled switching operation.

5. SEPIC Converters

Single-ended primary-inductor converter (SEPIC) architectures can use current-mode PWM control to generate regulated output voltages above or below the input voltage.

6. Industrial Power Supplies

The industrial temperature range supports use in appropriately designed industrial power conversion equipment.

7. Auxiliary Power Supplies

The controller can be used to generate auxiliary DC rails for control boards, communication equipment, and embedded systems.

8. Isolated Power Conversion

When combined with an appropriate transformer, feedback isolation, and protection circuitry, the controller can support isolated switching power supplies.

9. Telecom and Communication Equipment

Current-mode PWM controllers can be used in power conversion stages for communication infrastructure and networking electronics.

10. Embedded Power Management

The UCC28C43DR can serve as the switching controller in custom DC/DC power supplies for embedded electronic systems.

Application Design Recommendations:

  • Select the switching frequency based on efficiency, component size, and EMI requirements.
  • Provide adequate VDD bypassing near the controller.
  • Keep current-sense traces short and away from noisy switching nodes.
  • Use appropriate compensation components to maintain feedback-loop stability.
  • Verify MOSFET gate charge against the controller's drive capability.
  • Evaluate current-sense filtering and leading-edge noise.
  • Consider slope compensation for peak current-mode operation at high duty cycles.
  • Check startup and UVLO behavior under minimum input voltage conditions.
  • Provide suitable overvoltage, overload, and thermal protection at the system level.
  • Follow the official TI PCB layout and application guidelines.

The UCC28C43DR is particularly useful for designers seeking a compact, low-power current-mode PWM controller with high-frequency operation and direct MOSFET gate-drive capability.

10. Disclaimer

This UCC28C43DR technical guide is provided for general engineering reference, product identification, and electronic component selection.

Electrical specifications are based on publicly available Texas Instruments technical documentation.

Specifications, ordering information, and product availability may change as manufacturers revise their products.

All electrical limits, pin assignments, thermal characteristics, and application requirements should be verified using the latest official manufacturer datasheet.

The maximum 1MHz oscillator frequency and ±1A peak output current are device capabilities and do not guarantee suitability for every switching power supply design.

Actual performance depends on external MOSFET selection, magnetic components, switching frequency, compensation network, PCB layout, and operating conditions.

Potential replacement components require independent verification of electrical characteristics, package compatibility, and application performance.

Official Technical Reference: Texas Instruments UCCx8C4x BiCMOS Low-Power Current-Mode PWM Controller Datasheet

Editorial Note: This document is an independent technical overview intended to support electronic component research and engineering decisions. It is not an official Texas Instruments publication or a guarantee of availability, interchangeability, or suitability for a specific application.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```