Home > The Posts > Product Guides > UVR1C100MDD Nichicon 10µF 16V Capacitor – Datasheet, Specifications & Applications
UVR1C100MDD - Nichicon

UVR1C100MDD Nichicon 10µF 16V Capacitor – Datasheet, Specifications & Applications

Product Technical Guide UVR1C100MDD 10µF 16V Aluminum Electrolytic Capacitor Technical GuideTechnical information for the Nichicon UVR1C100MDD radial aluminum electrolytic capacitor, covering capacita…

In Stock 2,170 Available Inventory
Part No.:
UVR1C100MDD
Manufacturer:
Nichicon
Package:
Datasheet:
UVR1C100MDD.pdf
Description:
CAP ALUM 10UF 20% 16V RADIAL TH
Quantity:
Original Supply

Strict supplier screening and quality control support.

Datasheet Support

Help engineers quickly verify product specifications.

BOM Sourcing

Support multi-part procurement and RFQ matching.

UVR1C100MDD Nichicon 10µF 16V Capacitor – Datasheet, Specifications & Applications

Product Technical Guide
UVR1C100MDD 10µF 16V Aluminum Electrolytic Capacitor Technical Guide

Technical information for the Nichicon UVR1C100MDD radial aluminum electrolytic capacitor, covering capacitance, rated voltage, ripple current, package dimensions, polarity, alternatives, and applications.

Part NumberUVR1C100MDD
ManufacturerNichicon
Device TypeAluminum Electrolytic Capacitor
01

Product Introduction

The UVR1C100MDD is a general-purpose aluminum electrolytic capacitor manufactured by Nichicon Corporation. It belongs to the UVR series of miniature radial-leaded capacitors.

The capacitor offers a nominal capacitance of 10µF, a rated voltage of 16V DC, and a capacitance tolerance of ±20%.

Its compact cylindrical body measures approximately 5mm in diameter and 11mm in length, with a nominal lead spacing of 2mm.

The UVR1C100MDD is a polarized component designed for use in circuits requiring energy storage, supply decoupling, filtering, and voltage smoothing.

With an operating temperature range of -40°C to +85°C and a rated endurance of 2,000 hours at +85°C under specified test conditions, it is intended for general-purpose electronic applications.

Lifecycle Notice: Nichicon identifies this specific part number as End of Life. Designers developing new products should evaluate suitable currently available replacements.

02

Key Benefits

Reliable 10µF Capacitance

Provides bulk capacitance for suitable low-voltage filtering, decoupling, and energy-storage applications.

Compact Radial Package

A 5mm diameter body supports integration into compact through-hole PCB assemblies.

Defined Ripple Capability

Rated for 50mA ripple current at 85°C and 120Hz, with frequency-dependent ratings.

General-Purpose Versatility

Suitable for a broad range of low-voltage electronic circuits within its electrical and thermal limits.

03

Features

  • Nichicon UVR series miniature aluminum electrolytic capacitor
  • 10µF nominal capacitance
  • 16V DC rated voltage
  • ±20% capacitance tolerance
  • Polarized radial-leaded construction
  • 5mm diameter and 11mm body length
  • 2mm nominal lead spacing
  • 50mA rated ripple current at 85°C and 120Hz
  • 100mA high-frequency ripple current rating under specified conditions
  • 0.20 maximum dissipation factor at 20°C and 120Hz
  • 4.8µA maximum leakage current after one minute under specified conditions
  • Operating temperature range of -40°C to +85°C
  • 2,000-hour endurance rating at +85°C
  • Suitable for through-hole PCB mounting
  • General-purpose electronic filtering and decoupling
  • End-of-Life lifecycle status
04

Package

Package Type: Radial, Cylindrical Can

Mounting Type: Through Hole

Body Diameter: 5.0mm

Body Length: 11.0mm

Lead Spacing: 2.0mm nominal

Maximum Seated Height: Approximately 12.5mm

Polarity: Polarized

Packaging: Bulk, without terminal forming

The UVR1C100MDD uses two radial leads extending from the same end of the cylindrical capacitor body.

PCB designers should confirm the capacitor footprint, lead diameter, component clearance, and polarity marking before installation.

05

Pinout

The UVR1C100MDD has two terminals with defined polarity.

Positive (+)Connect to the positive circuit potential.
Negative (-)Connect to the negative circuit potential or appropriate ground reference.

Polarity Identification: Aluminum electrolytic capacitors commonly use a stripe on the body sleeve to identify the negative terminal. Confirm the actual markings on the supplied component.

Installation Warning: Reverse polarity or excessive applied voltage can cause overheating, leakage, venting, or component failure.

Always observe the manufacturer's rated voltage, polarity, and soldering recommendations.

06

Specifications

Parameter Value
Part Number UVR1C100MDD
Manufacturer Nichicon Corporation
Product Series UVR
Capacitor Type Aluminum Electrolytic
Nominal Capacitance 10µF
Capacitance Tolerance ±20%
Rated Voltage 16V DC
Polarity Polarized
Operating Temperature -40°C to +85°C
Rated Ripple Current at 120Hz 50mA RMS at 85°C
High-Frequency Ripple Current 100mA RMS under specified conditions
Dissipation Factor (tan δ) 0.20 maximum at 20°C, 120Hz
Leakage Current After 1 Minute 4.8µA maximum at 20°C
Leakage Current After 2 Minutes 3µA maximum at 20°C
Endurance 2,000 hours at +85°C
Body Diameter 5.0mm
Body Length 11.0mm
Nominal Lead Spacing 2.0mm
Mounting Type Through Hole
Package Radial, Can
Packaging Bulk
Manufacturer Lifecycle Status End of Life

Technical Note: The rated ripple current, dissipation factor, and leakage current are specified under defined test conditions. Operating life depends on ambient temperature, ripple heating, applied voltage, and application-specific stresses.

07

Equivalent

When searching for a UVR1C100MDD equivalent, replacement, or alternative, compare capacitance, voltage rating, operating temperature, ripple-current rating, impedance, endurance, dimensions, and lead spacing.

Panasonic ECA-1CM100B: A 10µF, 16V radial aluminum electrolytic capacitor listed by distributors as a direct substitute candidate. Verify mechanical and electrical compatibility for the intended application.

Panasonic ECA-1HM100: A 10µF radial capacitor with a higher 50V voltage rating, listed as an upgrade candidate. Physical dimensions and other characteristics may differ.

Panasonic ECE-A1CKS100I: A 10µF, 16V radial aluminum electrolytic capacitor identified as a similar replacement candidate. Check the package and lead arrangement before substitution.

Nichicon UVZ1C100MDD: A related 10µF, 16V radial capacitor with a different temperature and endurance profile. It is also listed as End of Life and should not be treated as a preferred long-term sourcing solution.

Replacement Recommendation: For new designs, prioritize an available, manufacturer-supported capacitor meeting or exceeding the original voltage, ripple-current, endurance, and temperature requirements. Confirm that its diameter, height, and lead spacing fit the PCB.

For repair or existing production, inspect the original circuit conditions and verify the replacement's suitability before installation.

08

Manufacturer

Nichicon Corporation manufactures capacitors and energy-storage products for consumer, industrial, automotive, and power-electronics applications.

The UVR series comprises miniature general-purpose aluminum electrolytic capacitors intended for use in suitable electronic circuits.

The manufacturer's documentation provides capacitance ratings, voltage options, electrical characteristics, mechanical dimensions, and endurance conditions.

Official Product Page: Nichicon UVR1C100MDD Product Information

Official UVR Series Datasheet: Nichicon Miniature Aluminum Electrolytic Capacitors (PDF)

09

Applications

Power Supply Filtering

Reducing low-frequency ripple and smoothing DC supply rails within the capacitor's ratings.

Embedded Control Boards

Local bulk decoupling for compatible microcontrollers and electronic control circuits.

Audio Electronics

Suitable coupling and filtering functions where capacitor polarity and frequency characteristics are considered.

Industrial Electronics

General-purpose filtering and energy storage in appropriately rated control modules.

Voltage Regulator Circuits

Input or output bulk capacitance where the regulator manufacturer's stability requirements are satisfied.

Equipment Maintenance

Component-level repair of legacy electronics using correctly specified and appropriately stored replacement capacitors.

10

Disclaimer

This information is provided for general product identification and technical reference. Specifications, polarity markings, package dimensions, ripple-current ratings, environmental limits, and lifecycle information should be checked against the latest Nichicon documentation before design or procurement. Equivalent products are candidates for engineering evaluation and are not guaranteed direct replacements. Because UVR1C100MDD is an End-of-Life product, buyers should verify inventory authenticity, storage history, date codes, and suitability for the intended application. Availability and pricing may change without notice.

Quick RFQ Send your inquiry and our sales team will respond quickly.

Part Number
Quantity*
Price
Name*
Company*
Email*
Comments
```