W25Q128JVSIQ Winbond 128Mb SPI NOR Flash Memory
KHBBC4B03C-MC1K Samsung 36GB HBM3E High Bandwidth MemoryThe KHBBC4B03C-MC1K is a Samsung HBM3E (High Bandwidth Memory) device featuring 36GB memory capacity and a listed data rate of 9.2Gb/s per…
- Part No.:
- W25Q128JVSIQ
- Manufacturer:
- Winbond Electronics
- Package:
- 8-SOIC (0.209", 5.30mm Width)
- Datasheet:
- W25Q128JVSIQ.pdf
- Description:
- IC FLASH 128MBIT SPI/QUAD 8SOIC
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
W25Q128JVSIQ Winbond 128Mb SPI NOR Flash Memory
Explore the Winbond W25Q128JVSIQ, a 128Mbit (16MB) non-volatile serial NOR Flash memory supporting Standard, Dual, and Quad SPI interfaces, 133MHz single-transfer-rate operation, a 2.7V to 3.6V supply range, and an 8-pin 208-mil SOIC package.
Product Introduction
The W25Q128JVSIQ is a 128Mbit serial NOR Flash memory manufactured by Winbond Electronics. It belongs to the W25Q-JV SpiFlash family and provides non-volatile storage for embedded systems, microcontrollers, processors, and digital electronic equipment.
With a total memory capacity of 128Mbit (16MB), the device can store firmware, boot code, configuration parameters, calibration data, and other information that must remain available when power is removed.
The memory supports Standard SPI, Dual SPI, and Quad SPI communication. These interfaces allow designers to select different data-transfer modes according to processor compatibility and system performance requirements.
The W25Q128JVSIQ supports a maximum listed single-transfer-rate clock frequency of 133MHz, although actual clock limits depend on the selected instruction and operating mode.
The device operates from a 2.7V to 3.6V supply and supports an ambient operating temperature range of -40°C to +85°C.
Its 8-pin SOIC package has a nominal 208-mil body width, making it suitable for surface-mount PCB assemblies.
Typical applications include embedded firmware storage, industrial controllers, networking devices, communication equipment, consumer electronics, and processor boot memory.
Lifecycle Note: Winbond currently lists the exact W25Q128JVSIQ ordering code as Not Recommended for New Design. Existing applications should verify supply availability, while new designs should evaluate currently recommended devices.
Key Benefits
128Mbit Non-Volatile Storage
Provides 16MB of persistent memory for firmware, boot programs, configuration data, and embedded applications.
High-Speed Serial Interface
Supports SPI, Dual SPI, and Quad SPI operation with a maximum listed STR frequency of 133MHz.
Compact 8-Pin Package
The 208-mil SOIC-8 package provides a practical surface-mount solution for embedded PCB designs.
Data Protection Features
Provides hardware and software protection mechanisms to help control unauthorized or unintended memory modification.
Features
- Winbond W25Q-JV SpiFlash memory family
- 128Mbit non-volatile NOR Flash capacity
- 16MB total memory storage
- 16M x 8 memory organization
- Standard SPI interface
- Dual SPI data transfer capability
- Quad SPI data transfer capability
- Maximum listed STR clock frequency of 133MHz
- 2.7V to 3.6V operating supply voltage
- 256-byte programmable page size
- 4KB sector erase capability
- 32KB block erase capability
- 64KB block erase capability
- Chip erase functionality
- Hardware write protection
- Software-controlled memory protection
- Programmable status and configuration registers
- JEDEC identification support
- Power-down operating mode
- Execute-in-place support where compatible
- 8-pin SOIC 208-mil package
- -40°C to +85°C operating temperature range
- RoHS-compliant and halogen-free packaging
Technical Note: Available commands, read timing, protection behavior, and reset functionality depend on the device configuration and datasheet revision. Designers should validate their SPI controller settings against the official Winbond documentation.
Package
Package Designation: S
Package Type: SOIC-8 / SOP-8
Number of Pins: 8
Nominal Body Width: 208 mil (approximately 5.28mm)
Mounting Type: Surface Mount
Package Material: Molded semiconductor package
Ordering Part Number: W25Q128JVSIQ
Top-Side Marking: 25Q128JVSQ
Supply Voltage: 2.7V to 3.6V
Temperature Grade: -40°C to +85°C
The SOIC-8 208-mil package provides a familiar footprint for serial Flash memory devices used in embedded electronic systems.
Designers must distinguish this wider 208-mil package from narrower SOIC-8 variants. Similar memory capacity and pin count do not guarantee mechanical interchangeability.
PCB Design Note: Use the official Winbond package drawing for pad dimensions, lead pitch, soldering requirements, and component placement.
Pinout
The W25Q128JVSIQ uses an 8-pin SOIC package with power, ground, clock, chip-select, and configurable serial data connections.
Standard SPI: Communication primarily uses /CS, CLK, DI, and DO.
Dual SPI: IO0 and IO1 support dual-data communication.
Quad SPI: IO0, IO1, IO2, and IO3 support four-data-line transfers. The alternate /WP and /HOLD or /RESET functions are subject to the selected interface mode.
Important Design Note: The HOLD versus RESET function depends on the applicable device variant and configuration. Verify the exact datasheet and status-register settings before connecting external control circuitry.
Pinout Reference: Winbond W25Q128JV datasheet, SOIC 208-mil package pin configuration.
Specifications
| Parameter | Value |
|---|---|
| Part Number | W25Q128JVSIQ |
| Manufacturer | Winbond Electronics |
| Product Series | W25Q-JV |
| Device Type | Serial NOR Flash Memory |
| Memory Technology | Non-Volatile NOR Flash |
| Memory Density | 128Mbit |
| Memory Capacity | 16MB |
| Memory Organization | 16M x 8 |
| Interface | Standard / Dual / Quad SPI |
| Maximum STR Frequency | 133MHz |
| DTR Support | Not listed for this ordering code |
| Operating Voltage | 2.7V to 3.6V |
| Operating Temperature | -40°C to +85°C |
| Page Size | 256 Bytes |
| Sector Erase Size | 4KB |
| Block Erase Sizes | 32KB / 64KB |
| Chip Erase | Supported |
| Write Protection | Hardware and Software |
| JEDEC Identification | Supported |
| Package | SOIC-8 / SOP-8 |
| Package Width | 208 mil |
| Pin Count | 8 |
| Mounting Type | Surface Mount |
| Top-Side Marking | 25Q128JVSQ |
| RoHS Status | Compliant |
| Halogen-Free Packaging | Yes |
| Manufacturer Design Status | Not Recommended for New Design |
| Longevity Program | Listed by Winbond |
Capacity Note: 128Mbit equals 16MB. Memory capacity should not be confused with a 128MB device.
Clocking Note: The maximum listed 133MHz STR frequency does not apply to every command or interface configuration. Consult the datasheet timing tables.
Power Design: Provide appropriate supply decoupling and verify voltage, power-up timing, signal levels, and controller compatibility.
Equivalent
When searching for a W25Q128JVSIQ equivalent, replacement, or alternative, compare memory density, supply voltage, SPI command compatibility, Quad SPI behavior, package dimensions, pin assignments, erase geometry, and firmware requirements.
W25Q128JVSIQG: A related Winbond ordering code with matching published capacity, voltage, interface, package, and temperature specifications. Winbond identifies the additional G suffix as a manufacturing electricity-source designation, with identical functional specifications.
W25Q128JVPIQ: A related 128Mbit W25Q128JV device using a WSON-8 6mm x 5mm package. It is not a footprint-compatible replacement for the SOIC-8 package.
W25Q128JVEIQ: A related 128Mbit device using a WSON-8 8mm x 6mm package. Mechanical compatibility must be evaluated separately.
W25Q128JVFIQ: A related W25Q128JV variant using a 16-pin SOIC package. It is not a direct PCB replacement for W25Q128JVSIQ.
Other 128Mbit SPI NOR Flash Devices: Components from other manufacturers may provide similar capacity and interface features but can differ in identification codes, status registers, erase behavior, timing, and protection functions.
Replacement Recommendation: For existing designs, prioritize the exact manufacturer part number or an officially documented equivalent. For new designs, evaluate a currently recommended Winbond product.
Matching memory density, voltage, and package alone does not guarantee firmware compatibility or interchangeability.
Manufacturer
Winbond Electronics Corporation is a semiconductor manufacturer specializing in memory technologies including serial NOR Flash, NAND Flash, and specialty DRAM products.
Its SpiFlash portfolio provides non-volatile code and data storage solutions for embedded computing, consumer electronics, industrial equipment, and communication systems.
The W25Q-JV family includes serial Flash memory devices supporting Standard, Dual, and Quad SPI interfaces.
Official Manufacturer: Winbond Electronics
Official Product Information: W25Q128JVSIQ Product Specifications
Technical Datasheet: W25Q128JV Datasheet PDF
Lifecycle Note: Winbond currently identifies W25Q128JVSIQ as Not Recommended for New Design. The product is also listed in the manufacturer's longevity support program. These design-status and longevity classifications should not be interpreted as a guarantee of immediate inventory availability.
Applications
Microcontroller Firmware Storage
External non-volatile storage for MCU firmware images, application code, and configuration parameters.
Industrial Automation
Firmware, calibration, and system configuration storage for industrial controllers and embedded equipment.
Networking Equipment
Boot code and configuration storage for routers, gateways, communication modules, and networking devices.
Embedded Computing
Non-volatile program storage for processors, development boards, and specialized embedded computing platforms.
IoT Devices
Firmware and configuration storage for connected sensors, smart devices, and wireless communication products.
Firmware Update Systems
Storage for firmware images and update data in embedded systems with suitable memory-management software.
Disclaimer
This technical guide is provided for general product identification, engineering reference, and electronic component sourcing. Specifications are based on Winbond product information and W25Q128JV technical documentation. Electrical characteristics, timing requirements, package dimensions, memory commands, protection functions, and operating limits must be verified against the latest applicable manufacturer datasheet before design or procurement.
W25Q128JVSIQ is currently identified by Winbond as Not Recommended for New Design. Related part numbers are potential alternatives for evaluation only and are not automatically interchangeable. Product pricing, inventory, and delivery schedules may change without notice.

