TC4424AVOA713 Dual 3A MOSFET Gate Driver Product Introduction
TC4424AVOA713 is a dual low-side MOSFET gate driver designed for fast and reliable switching control. With a 4.5V to 18V supply range, 4.5A peak source and sink capability,
- Part No.:
- TC4424AVOA713
- Manufacturer:
- Microchip Technology
- Package:
- 8-SOIC (0.154", 3.90mm Width)
- Datasheet:
- TC4424AVOA713.pdf
- Description:
- IC GATE DRVR LOW-SIDE 8SOIC
- Quantity:
-
Original Supply
Strict supplier screening and quality control support.
-
Datasheet Support
Help engineers quickly verify product specifications.
-
BOM Sourcing
Support multi-part procurement and RFQ matching.
TC4424AVOA713 Dual 3A MOSFET Gate Driver Product Introduction
A technical overview of TC4424AVOA713, covering its dual non-inverting MOSFET driver architecture, electrical specifications, package information, key features, and typical applications.
Product Introduction
TC4424AVOA713 is a 3A dual non-inverting MOSFET driver from Microchip Technology. It is designed to provide high-current, high-speed drive signals for external MOSFETs and other capacitive, resistive, or inductive loads.
The device operates from a 4.5V to 18V supply and integrates two independent driver channels in an 8-pin SOIC package. Its non-inverting configuration allows the output signal to follow the logic state of the corresponding input.
TC4424AVOA713 belongs to the TC4423A/TC4424A/TC4425A family of high-speed power MOSFET drivers. The A-series provides high peak output current, low output impedance, matched rise and fall times, and short propagation delay for demanding switching applications.
Key Benefits
4.5A Peak Output
The TC4424A driver architecture provides a typical 4.5A peak output current for fast charging and discharging of MOSFET gates.
Dual Driver Channels
Two independent non-inverting driver channels allow one device to control two external MOSFET gates or other high-current loads.
Fast Switching
The device can drive an 1800pF capacitive load with typical 12ns rise and fall times, supporting high-speed switching applications.
Compact SOIC Package
The 8-pin 150-mil SOIC package provides a compact surface-mount solution for dual MOSFET gate-drive applications.
Features
- 3A dual MOSFET driver architecture
- Dual non-inverting outputs
- 4.5V to 18V operating supply voltage
- 4.5A typical peak output current
- 1800pF capacitive load drive capability
- 12ns typical rise time at 1800pF
- 12ns typical fall time at 1800pF
- 40ns typical propagation delay
- Low output impedance
- Matched rise and fall times
- Latch-up protection with more than 1.5A reverse-current capability under specified conditions
- Input can withstand negative voltage swings up to 5V
- TTL and CMOS compatible inputs
- Approximately 300mV input hysteresis for improved noise immunity
- Operating temperature range of -40°C to +125°C
- Pin compatible with related TC4423/TC4424/TC4425 and TC4426A/TC4427A/TC4428A devices
Package
Package: Plastic SOIC (150 mil body), 8-lead
Package Code: OA
Tape and Reel Code: OA713
Pin Count: 8
Mounting: Surface Mount
Temperature Range: -40°C to +125°C
TC4424AVOA713 is specifically identified by Microchip as a 3A dual non-inverting MOSFET driver in an 8-lead SOIC package with tape-and-reel packaging. The OA713 ordering code identifies the SOIC package and tape-and-reel configuration.
Pinout
TC4424AVOA713 uses an 8-pin SOIC configuration with two independent input and output channels. The pin arrangement provides dedicated connections for the two inputs, two outputs, supply voltage, ground, and no-connect pins.
For the 8-pin SOIC package, the basic pin functions are NC, IN A, GND, IN B, OUT B, VDD, OUT A, and NC. The exact pin numbering and package orientation should be verified against the latest Microchip package drawing before PCB layout.
Specifications
| Parameter | Value |
|---|---|
| Device Type | Dual High-Speed MOSFET Driver |
| Manufacturer | Microchip Technology |
| Part Number | TC4424AVOA713 |
| Driver Configuration | Dual Non-Inverting |
| Number of Channels | 2 |
| Supply Voltage | 4.5V to 18V |
| Peak Output Current | 4.5A typical |
| Capacitive Load Drive | 1800pF |
| Rise Time | 12ns typical at 1800pF |
| Fall Time | 12ns typical at 1800pF |
| Propagation Delay | 40ns typical |
| Output Resistance | 2.5Ω typical |
| Input Logic | TTL / CMOS Compatible |
| Package | 8-Pin SOIC, 150 mil Body |
| Operating Temperature | -40°C to +125°C |
| Mounting | Surface Mount |
Equivalent
TC4424AVOA713 belongs to the TC4424A family of dual 3A MOSFET drivers. When evaluating a related device, engineers should compare the driver configuration, supply-voltage range, peak output current, switching characteristics, input logic, pin configuration, package type, and operating temperature range.
TC4424A is the core device family represented by TC4424AVOA713, while other TC442x devices may use different logic configurations or electrical characteristics. A device with a similar current rating should not automatically be considered a drop-in replacement without checking the complete electrical and mechanical requirements.
Manufacturer
Microchip Technology is the manufacturer of TC4424AVOA713. The device belongs to Microchip's TC4423A/TC4424A/TC4425A family of high-speed power MOSFET drivers.
The TC4424A family provides dual-output 3A driver capability and is designed for applications that require fast charging and discharging of MOSFET gates or other high-current loads. TC4424AVOA713 is the 8-lead SOIC tape-and-reel ordering version of the TC4424A non-inverting driver.
Applications
Switch-Mode Power Supplies
The high-current output stage makes TC4424AVOA713 suitable for driving MOSFETs in high-speed switch-mode power supply designs.
Pulse Transformer Drive
The dual high-speed driver channels can be used in pulse transformer drive circuits requiring fast and strong switching signals.
Line Drivers
The low output impedance and fast switching characteristics support demanding line-driver applications.
DC Motor Drive
TC4424AVOA713 can provide high-current control signals for small DC motor switching applications.
MOSFET Gate Drive
The device is designed to rapidly charge and discharge external MOSFET gates in power-switching circuits.
High-Speed Switching
Fast rise and fall times make the device suitable for circuits that require high-speed digital or power switching.
Disclaimer
The information provided on this page is for product identification and technical reference purposes only. Electrical ratings, operating conditions, switching characteristics, package dimensions, pin assignments, thermal limits, and application requirements should be verified against the latest Microchip Technology datasheet before production design, procurement, or component replacement.

