Home > The Blogs > Industry News > TC4424A Replacement and Equivalent: Best Alternatives for MOSFET Gate Driving
NEWS DETAIL

TC4424A Replacement and Equivalent: Best Alternatives for MOSFET Gate Driving

Author: FU JIA (H.K) Date: 2026.10.12 Views:

TC4424A Replacement and Equivalent: What Are the Best Alternatives?

The search for a TC4424A replacement is becoming increasingly important for engineers and purchasing teams who need reliable alternatives for dual MOSFET gate-driving applications.

TC4424A is part of Microchip's TC4423A/TC4424A/TC4425A family of dual high-speed MOSFET drivers. The family is designed for high-current gate driving and supports a 4.5V to 18V operating range. Microchip's documentation specifies a typical peak output current of 4.5A, low output impedance and fast charging and discharging of capacitive loads.

But finding a replacement is not simply a matter of finding another IC with "4.5A MOSFET driver" in its description.

The replacement must also match the required logic function, supply voltage, output behavior, timing, package, pin configuration and the MOSFET being driven.
This article continues the TC4424 content series, following the previous discussions about TC4424 vs TC4424AVOA713, TC4424A vs TC4424, TC4424A vs TC4423A vs TC4425A, and TC4424 Replacement and Equivalent.


What Is TC4424A?  

TC4424A is a dual-output MOSFET gate driver designed to provide a strong interface between a logic or PWM signal and external power MOSFETs.
TC4424A 是一种双输出 MOSFET 栅极驱动器,旨在在逻辑信号或 PWM 信号与外部功率 MOSFET 之间提供良好的接口.

The device belongs to Microchip's A-series family and is the dual non-inverting member of the TC4423A/TC4424A/TC4425A group.

The A-series documentation lists the following major characteristics:

  • Dual MOSFET gate-driver outputs
  • 4.5V to 18V operating supply range
  • 4.5A typical peak output current
  • 1800pF capacitive load drive capability
  • Fast switching capability
  • Approximately 2.5Ω typical output impedance
  • Matched rise and fall characteristics
  • Latch-up protection
  • Negative input swing tolerance up to 5V

Microchip describes the A-series as an improved version of the earlier TC4423/TC4424/TC4425 family, with higher peak output drive capability, lower shoot-through current and matched timing characteristics.

Why Do Engineers Need a TC4424A Equivalent?

There are several common reasons for looking for an alternative to TC4424A.

  • Limited local stock
  • Long lead time
  • Unexpected price increases
  • Production demand exceeding available supply
  • Second-source requirements
  • Regional purchasing restrictions
  • Long-term supply planning
  • New design optimization
  • Automotive or industrial qualification requirements

In many cases, the customer is not trying to completely redesign the circuit. They simply want another component that can perform the same job without creating a new engineering problem.

That makes the difference between an equivalent and an alternative especially important.

TC4424A Replacement vs TC4424A Equivalent

These two terms are often used interchangeably in component searches, but they should be separated when making an engineering decision.

TC4424A Equivalent

An equivalent part generally has similar electrical characteristics and performs a similar function.

It may have similar drive current, operating voltage and switching performance, but it does not necessarily have the same package or pinout.

TC4424A Replacement

A replacement is expected to take over the original component's function in the target design.

The closer the replacement is to the original in electrical behavior, logic configuration and physical compatibility, the lower the redesign risk.

TC4424A Drop-In Replacement

A true drop-in replacement is the most demanding category. It should fit the existing PCB and provide compatible pin functions without requiring major circuit changes.

Therefore, not every TC4424A equivalent is a drop-in TC4424A replacement.

First Replacement Candidate: TC4424

The most obvious alternative is the original TC4424.

TC4424 and TC4424A belong to the same basic dual non-inverting driver family. TC4424 is specified for 4.5V to 18V operation and 3A peak source and sink current, while the A-series version provides improved drive characteristics.

This creates an important distinction:

TC4424 can be considered a functional family alternative, but it is not automatically an equal-performance replacement for TC4424A.

If the application does not require the additional drive capability of the A-series device, TC4424 may be worth evaluating.

If the design was optimized around the stronger output characteristics of TC4424A, however, the original TC4424 may produce different switching behavior.

TC4424 vs TC4424A for Replacement Applications

Feature TC4424 TC4424A
Driver configuration Dual non-inverting Dual non-inverting
Supply range 4.5V–18V 4.5V–18V
Peak output current 3A typical 4.5A typical
Capacitive load drive 1800pF in about 25ns 1800pF in about 12ns
Typical output impedance 3.5Ω 2.5Ω
Logic behavior Non-inverting Non-inverting

The table shows why TC4424 remains relevant as an alternative but should not be treated as an identical electrical replacement.

For low-frequency or less demanding switching applications, the difference may be acceptable after testing. For high-frequency power conversion, the difference can become much more important.

Can TC4423A Replace TC4424A?

TC4423A is closely related to TC4424A, but it has a different logic configuration.

TC4423A is the dual inverting version, while TC4424A is the dual non-inverting version.

Therefore, TC4423A should not be treated as a direct drop-in replacement simply because the two devices share similar drive specifications.

If the surrounding control logic can be changed to accommodate signal inversion, TC4423A may become an engineering alternative.

However, that situation should be described as a design-level alternative, not a simple replacement.

Can TC4425A Replace TC4424A?

TC4425A provides one inverting channel and one non-inverting channel.

That makes it useful for applications where two different logic polarities are required, but it does not provide the same dual non-inverting function as TC4424A.

For a circuit using both TC4424A outputs as non-inverting drivers, TC4425A would require careful circuit review before approval.

The advantage of TC4425A is flexibility, not direct functional equivalence.

What About Other MOSFET Gate Drivers?

When TC4424A is difficult to source, engineers may also consider MOSFET drivers from other manufacturers.

This is where the replacement search becomes much broader.

For example, modern dual low-side gate drivers may offer similar or higher peak current, faster propagation delay and newer packaging. TI's UCC27444 family operates from 4.5V to 18V and provides two independent gate-drive channels, with a typical 4A peak drive capability and fast propagation delay.

Another example is TI's UCC27526 family, which supports a 4.5V to 18V supply range and can provide up to 5A source and sink current.

These parts demonstrate an important point: there are technically capable alternatives outside the Microchip family.

But they should not automatically be called drop-in TC4424A replacements.

Different pinouts, enable functions, input thresholds, UVLO behavior, timing and package options can require PCB or circuit changes.

Why Modern Drivers May Not Be the Best Drop-In Replacement

Newer gate drivers often have attractive specifications.

They may provide:

  • Higher peak current
  • Lower propagation delay
  • Lower supply current
  • UVLO protection
  • Enable or disable functions
  • Better timing matching
  • Smaller packages

From a new-design perspective, these features can be very valuable.

However, additional features can also make a device less suitable as a simple replacement for an existing PCB.

For example, if the original circuit does not have an enable signal but the new driver has different control requirements, the engineer may need to modify the board.

Therefore, the best new-design alternative may not be the best drop-in replacement.

TC4424A Replacement Selection Table

Candidate Main Advantage Compatibility Level Engineering Review
TC4424 Same basic dual non-inverting concept High functional similarity Recommended
TC4423A Same A-series drive platform Logic mismatch Required
TC4425A Mixed logic configuration Partial functional match Required
UCC27444 Modern dual high-speed driver System-level alternative Required
UCC27526 Higher-current modern driver System-level alternative Required

This table should be treated as an engineering screening guide rather than a universal replacement approval list.

What Makes a Good TC4424A Replacement?

A good replacement should match the application at several levels.

1. Logic Compatibility

This should be checked first.

If the original circuit requires two non-inverting outputs, the alternative should provide the same behavior or the control logic must be modified.

2. Supply Compatibility

The replacement must operate correctly at the actual gate-driver supply voltage.

A similar maximum voltage is not enough. The minimum operating voltage and behavior during power-up and power-down also matter.

3. Gate Drive Capability

The source and sink current should be evaluated together with the MOSFET's gate charge and switching frequency.

A driver that looks stronger on paper may also produce faster switching edges, which can change EMI and ringing.

4. Timing

Propagation delay and rise/fall time can become important in high-frequency applications, especially where timing between multiple channels matters.

5. Package and Pinout

This determines whether the part can fit the existing PCB.

Even when two devices perform the same function, a different package or pin arrangement can turn a simple replacement into a board redesign.

TC4424A Replacement in Power Supply Applications

Power supplies are one of the most important application areas for MOSFET gate drivers.

In a switch-mode power supply, the gate driver affects how quickly the power MOSFET turns on and off.

If the replacement driver changes the switching waveform, it can affect:

  • Switching losses
  • Efficiency
  • EMI
  • Thermal performance
  • Voltage overshoot
  • Gate ringing
  • Overall converter stability

Microchip's application documentation specifically discusses matching MOSFET drivers with MOSFET requirements and lists TC4424A among its MOSFET driver solutions.

This is why a replacement should be evaluated as part of the complete power stage rather than as an isolated IC.

TC4424A Replacement for Motor Control

TC4424A and related drivers can also be used for driving MOSFETs in motor-control applications.

In these applications, the replacement decision can become even more sensitive because switching timing, current demand and electromagnetic noise can affect motor behavior.

Microchip lists direct drive of small DC motors among the applications for the TC4423A/TC4424A/TC4425A family.

For motor-control designs, engineers should pay particular attention to current transients, switching frequency, dead time and PCB grounding.

Should You Replace TC4424A With a Higher-Current Driver?

Not necessarily.

A common procurement mistake is to assume that a higher-current driver is always a better replacement.

For example, a 6A or 9A gate driver may provide more drive capability than TC4424A, but that does not mean it will automatically improve an existing circuit.

Higher drive current can produce faster gate transitions. Depending on the PCB layout and gate resistance, this can increase ringing and EMI.

The correct replacement should therefore be matched to the MOSFET and switching conditions, not selected solely by the largest current number.

When Is TC4424A Still the Best Choice?

If the original design has already been validated around TC4424A, continuing to use TC4424A can be the lowest-risk option when supply and pricing are acceptable.

This is particularly true for mature industrial products where the cost of redesign and requalification is much higher than the price difference between two gate drivers.

A replacement becomes more attractive when supply continuity, cost, availability or second-source requirements create a clear business reason for change.

Procurement Advice for TC4424A Alternatives

When purchasing a TC4424A alternative, buyers should avoid evaluating suppliers based only on the unit price.

A more useful comparison includes:

  • Manufacturer
  • Exact part number
  • Package
  • Production status
  • Available stock
  • Lead time
  • Date code
  • Traceability
  • Original or authorized supply channel
  • Engineering sample availability
  • Replacement qualification requirements

For high-volume production, a slightly higher unit price can be justified if it significantly reduces supply risk.

Step 1 - Identify the exact TC4424A part number

Confirm the package, ordering code and temperature requirements.

Step 2 - Confirm the logic function

Verify that the application requires dual non-inverting outputs.

Step 3 - Evaluate TC4424 first

Because it belongs to the same basic driver family, it can be an initial functional alternative when its lower drive capability is acceptable.

Step 4 - Compare modern alternatives

Consider newer dual MOSFET drivers when performance, availability or long-term supply is the main concern.

Step 5 - Check PCB compatibility

Compare pinout, package dimensions and thermal requirements.

Step 6 - Test with the actual MOSFET

Measure gate waveform, switching time, temperature, ringing and system efficiency.

Step 7 - Approve only after qualification

Do not move directly from sample evaluation to mass production without confirming the required quality and reliability criteria.

Final Verdict: What Is the Best TC4424A Equivalent?

There is no single universal answer to the question "What is the best TC4424A replacement?"

For a design that needs the same basic dual non-inverting MOSFET driver function, TC4424 is one of the closest family-level alternatives to evaluate, but its lower drive capability means it should not be treated as electrically identical to TC4424A.

TC4423A and TC4425A are useful members of the same family, but their different logic configurations mean they are not automatic replacements for TC4424A.

Modern drivers such as TI's UCC27444 or UCC27526 demonstrate that there are also strong alternatives outside the Microchip family. However, these should generally be treated as engineering alternatives rather than assumed drop-in replacements.

The safest conclusion is therefore:

For an existing TC4424A design, first look for the closest functional match. Then compare performance, package, pinout, supply availability and total qualification cost. Do not choose a replacement only because its current rating is higher or its price is lower.

What Comes Next in the TC4424 Content Series?

The TC4424 family content cluster has now moved from basic product information into practical replacement research.

The next useful step is to move beyond individual replacement parts and discuss the broader TC442x series selection guide.

That article can answer a larger search question: when should an engineer choose TC4423, TC4424, TC4425, TC4426, TC4427, TC4428 or their A-series versions?

This broader comparison can capture users who are not searching for one exact replacement, but are trying to select the right TC442x MOSFET gate driver for a new design.