Home > The Blogs > Industry News > TC4424A vs TC4423A vs TC4425A: Which Dual MOSFET Driver Should You Choose?
NEWS DETAIL

TC4424A vs TC4423A vs TC4425A: Which Dual MOSFET Driver Should You Choose?

Author: FU JIA (H.K) Date: 2026.10.12 Views:

TC4424A vs TC4423A vs TC4425A: Which Dual MOSFET Driver Should You Choose?

After comparing the TC4424A vs TC4424, the next question for many engineers is more practical: if TC4424A is one option, should a new design also consider TC4423A or TC4425A?

At first glance, the three devices look very similar. They belong to the same Microchip family, use the same 4.5V to 18V supply range, provide dual MOSFET driver outputs, and are designed for high-current, fast switching applications. However, they are not simply three identical parts with different names.

The key difference is the logic configuration. TC4423A is a dual inverting driver, TC4424A is a dual non-inverting driver, while TC4425A provides one inverting and one non-inverting channel. This small difference can have a major effect on how easily each device fits into an existing control circuit.

For engineers choosing a device for a new design, understanding this difference is often more important than simply comparing peak current numbers.

What Are TC4423A, TC4424A and TC4425A?

The TC4423A, TC4424A and TC4425A are part of Microchip's family of dual high-speed MOSFET gate drivers. They are designed to provide a strong, low-impedance interface between a control signal and a power MOSFET or other capacitive, resistive or inductive load.

Microchip describes the A-series devices as improved versions of the earlier TC4423, TC4424 and TC4425 family. The improved family provides higher peak output drive capability, lower cross-conduction current, and matched rise/fall and propagation-delay characteristics.

The three devices share much of their electrical architecture. The most important selection point is therefore not simply "which one is stronger?" but rather "which logic function matches my circuit?"

TC4423A vs TC4424A vs TC4425A: Quick Comparison

Parameter TC4423A TC4424A TC4425A
Driver Type Dual Inverting Dual Non-Inverting Inverting / Non-Inverting
Number of Outputs 2 2 2
Peak Output Current 4.5A typical 4.5A typical 4.5A typical
Supply Voltage 4.5V to 18V 4.5V to 18V 4.5V to 18V
Capacitive Load Capability 1800pF in about 12ns 1800pF in about 12ns 1800pF in about 12ns
Typical Output Impedance 2.5Ω 2.5Ω 2.5Ω
Typical Delay 40ns 40ns 40ns
Typical Use Inverting drive Non-inverting drive Mixed logic drive

Microchip's official documentation lists the same core A-series electrical features for the three devices, including 4.5A typical peak output current, 4.5V to 18V operating voltage, 1800pF drive capability, 2.5Ω typical output impedance and matched rise/fall times.

The Most Important Difference: Logic Configuration

The biggest practical difference between TC4423A, TC4424A and TC4425A is their input-to-output logic relationship.

TC4423A: Dual Inverting Driver

The TC4423A provides two inverting channels. When the input signal changes state, the output changes to the opposite logic state.

This configuration can be useful when the control architecture requires an inverted gate signal without adding a separate logic inverter. In some power-control circuits, this can reduce the number of external components and simplify the signal path.

For an engineer replacing another MOSFET driver, however, the inverting behavior must be checked carefully. A device with the same supply voltage and current capability is not automatically a functional replacement if the original circuit expects a non-inverting output.

TC4424A: Dual Non-Inverting Driver

The TC4424A provides two non-inverting channels. The output follows the logic state of the input.

This makes TC4424A a natural choice when the PWM, enable or control signal should directly control the MOSFET gate without changing its logical polarity.

This is also why TC4424A is particularly important in the TC4424 family discussion. As explained in the previous TC4424A vs TC4424 comparison, TC4424A is the improved A-series option while maintaining the same basic non-inverting dual-driver concept.

For a new design that already uses non-inverting control logic, TC4424A is often the easiest starting point among these three devices.

TC4425A: One Inverting Channel and One Non-Inverting Channel

The TC4425A is different because it combines both functions in one package. One channel is inverting and the other is non-inverting.

This makes TC4425A particularly interesting for circuits that need two different logic polarities. Instead of using two separate driver types, the designer can use one dual-output device.

That flexibility can be valuable in mixed-control systems, especially when board space, component count or routing simplicity matters.

Why the Difference Matters in Real MOSFET Circuits

It is easy to look at a component table and conclude that TC4423A, TC4424A and TC4425A are almost interchangeable. From a power-drive perspective, they are closely related. From a system-control perspective, they can behave very differently.

Imagine a PWM controller producing a logic-high signal when the power MOSFET needs to turn on.

With a non-inverting driver such as TC4424A, a high input produces the corresponding high-side output state at the driver output.

With an inverting driver such as TC4423A, the output polarity is reversed.

This means a designer changing from TC4424A to TC4423A may need to change the control logic, PWM polarity, firmware configuration or surrounding logic circuit.

Therefore, logic polarity should be checked before current capability when evaluating these three devices as alternatives.

TC4424A vs TC4423A: Which One Is Better?

There is no universal winner between TC4424A and TC4423A.

If the application requires a non-inverting dual driver, TC4424A is the more natural choice.

If the circuit requires a dual inverting driver, TC4423A is the better fit.

The important point is that the higher output current capability of the A-series family does not make one logic configuration universally superior to another.

For example, replacing a TC4424A with TC4423A simply because both have similar drive specifications could create an unwanted logic inversion. In a power converter, motor-control circuit or switching stage, that mistake could cause the MOSFET timing to operate in the wrong state.

For this reason, engineers should treat the logic function as a first-level selection criterion.

TC4424A vs TC4425A: Which One Should You Choose?

The comparison becomes more interesting when TC4424A and TC4425A are considered together.

TC4424A provides two non-inverting channels. TC4425A provides one inverting channel and one non-inverting channel.

If both outputs in the design require the same non-inverting behavior, TC4424A is the cleaner choice.

If the design requires different logic polarities, TC4425A can provide more flexibility without requiring two different driver ICs.

This makes TC4425A a useful option for specialized control architectures rather than a direct "upgrade" over TC4424A.

What About Drive Strength?

Drive strength is another important factor, especially when the gate charge of the selected MOSFET is high or the switching frequency is increased.

The A-series devices are specified with a typical peak output current of 4.5A and are designed to drive large capacitive loads quickly. Microchip specifies 1800pF in approximately 12ns and a typical output impedance of 2.5Ω for the A-series family.

These characteristics help the driver charge and discharge MOSFET gates quickly, which can reduce the time the MOSFET spends in the transition region.

However, a higher peak driver current does not automatically mean lower total system power loss. Actual switching performance depends on MOSFET gate charge, switching frequency, gate resistance, PCB layout, supply voltage, dead time and thermal conditions.

Microchip also provides application guidance for matching MOSFET drivers to MOSFET requirements, which highlights why driver selection should be considered together with the MOSFET rather than as an isolated component choice.

Applications for TC4423A, TC4424A and TC4425A

The A-series family is suitable for applications where fast and strong gate drive is required.

  • Switch-mode power supplies
  • DC-DC converters
  • Power switching circuits
  • Pulse transformer drive
  • Line drivers
  • Small DC motor drive circuits
  • High-current MOSFET switching stages
  • Capacitive load driving
  • Industrial control equipment
  • Power management systems

Microchip's datasheet specifically lists switch-mode power supplies, pulse transformer drive, line drivers and direct drive of small DC motors among the application areas.

The broader TC4423/4424/4425 family can also be used for capacitive, resistive and inductive loads that require low impedance and high peak current, including heavily loaded clock lines, coaxial cables and piezoelectric transducers.

Are TC4423A, TC4424A and TC4425A Pin Compatible?

The three devices share the same basic package and pin arrangement within the A-series family, but functional compatibility still depends on the logic behavior required by the application.

The official Microchip datasheet shows the common 8-pin arrangement with input and output channels, VDD and GND. The family is also described as pin-compatible with the earlier TC4423/TC4424/TC4425 family.

However, pin compatibility does not mean functional interchangeability.

This distinction is especially important when comparing TC4423A, TC4424A and TC4425A. A board may accept the same package, but the output logic may not match the original circuit.

Before approving any replacement, engineers should check:

  • Input logic polarity
  • Output logic behavior
  • Supply voltage
  • Peak source and sink current
  • MOSFET gate charge
  • Switching frequency
  • Propagation delay
  • Rise and fall time
  • Package and thermal performance
  • PCB footprint

TC4424A Replacement: Can TC4423A or TC4425A Be Used?

This is one of the most important procurement questions surrounding the TC4424A family.

In a simple sense, TC4423A and TC4425A may look like possible alternatives because they share the same family, supply range and high-current drive capability.

But neither should be treated as an automatic drop-in replacement for every TC4424A application.

TC4423A is inverting, while TC4424A is non-inverting. TC4425A combines one inverting and one non-inverting channel. Therefore, the correct replacement depends on the logic requirements of the original circuit.

For procurement teams, this is a good example of why searching for an "equivalent" based only on electrical headline specifications can be risky.

TC4424A vs TC4423A vs TC4425A: Procurement Perspective

From a purchasing perspective, these devices should be treated as a family rather than as three random alternatives.

If TC4424A is unavailable, the first question should not simply be "What has the same 4.5A current?" The better question is:

"Do I need two non-inverting outputs, two inverting outputs, or one of each?"

Once the logic configuration is confirmed, the engineering team can compare package availability, supply status, pricing, lead time and second-source options.

Microchip currently lists TC4423A, TC4424A and TC4425A as products in production, making the family relevant for current design and sourcing evaluation.

For high-volume purchasing, it is also important to verify the exact ordering code, package, temperature grade and any automotive-specific ordering requirements before placing a production order.

Why TC4424A Still Deserves Attention

Among the three devices, TC4424A is likely to receive the most attention when the design requires straightforward non-inverting MOSFET control.

It combines two non-inverting outputs with the high-current characteristics of the A-series family. It also fits naturally into the discussion started by the earlier TC4424 vs TC4424AVOA713 and TC4424A vs TC4424 articles.

The product-selection logic can therefore be viewed as a simple progression:

TC4424 → Original dual non-inverting 3A driver

TC4424A → Improved A-series dual non-inverting driver

TC4423A → Dual inverting version

TC4425A → Mixed inverting/non-inverting version

This structure also helps engineers understand why the three devices should not be viewed simply as competitors. They are better understood as different logic configurations within a closely related driver family.

Which One Should Engineers Choose?

Design Requirement Recommended Starting Point
Two non-inverting MOSFET driver channels TC4424A
Two inverting MOSFET driver channels TC4423A
One inverting and one non-inverting channel TC4425A
Existing TC4424 design Evaluate TC4424A first
Replacement with different logic polarity Requires circuit-level qualification

Final Takeaway

The TC4423A vs TC4424A vs TC4425A comparison shows an important lesson in component selection: similar electrical specifications do not necessarily mean identical system behavior.

All three A-series devices provide strong dual MOSFET gate-driving capability, operate from 4.5V to 18V and are designed for fast switching applications. Their most important difference is the logic configuration.

Choose TC4424A when you need dual non-inverting outputs. Choose TC4423A when you need dual inverting outputs. Choose TC4425A when your design needs one inverting and one non-inverting channel.

For engineers already evaluating TC4424A as an upgrade or replacement for TC4424, this comparison provides the next step: TC4424A is not simply one member of a generic MOSFET driver category. It is the non-inverting member of a closely related A-series family.

The next logical question is therefore even more procurement-focused: what can replace TC4424A when availability, price or supply continuity becomes the main concern?

That question will be the focus of the next article in this series: TC4424A Replacement and Equivalent Guide.